基于图像分割技术的图像数字水印算法研究

针对数字图像水印技术,通过对闭运算得到的图像再进行开运算,使实验得到的图像区域较为完整,采用4×4的正方形结构元素,使得图像区域有更多的白色像素被置为黑色,对图像进行取反操作,能够对图像区域的非连通区域进行填充.希望能够利用精确的图像分割算法,实现对复杂版面的文档图像的有效切割,在一定程度上对图像数字水印的推广起到促进作用.     

小梁现象的社会经济思考

以山西省河津市小梁乡为代表,研究了因建筑业的发展壮大而产生的社会经济空心化现象,分析了其形成原因,并提出了解决措施,以期引起大家对这一社会经济现象的关注,开展更深层次的研究。     

分组网与ISDN互连的性能分析

本文研究分组交换数据网与ＩＳＤＮ互连的性能分析，文中考虑了分组肉与窄带ＩＳＤＮ和宽带ＩＳＤＮ互连时信关所应完成的功能，分别给出了两种情况下的信关排队模型；在信关存储容量分别为有限和无限的情况下，对两种模型进行了求解，给出了阻塞概率和平均延迟的表达式。对于与Ｂ－ＩＳＤＮ互连的情况，提出了用开关确定性过程来描述输出排队的分组到达流，并提出了一种小时隙方法分析ＳＤＰ／Ｄ／１排队。     

Fabrication of Ormocer Containing Eu3＋ Ion and Their Optical Spectra

Eu3 ions were incorporated in sol and gel by a sol-gel processing using 3-glycidoxypropyltrimethoxysilane(CH2OCHCH2O(CH2)3Si(OCH3)3, GPTMS) and ethyl silicate (TEOS) as precursors. The basic chemical-physical properties such as DTA curve, FF-IR spectra and specific surface area were recorded. The characteristics of their optical spectra were measured and investigated. The results indicate that the emission intensity of Eu3 ion in ormocer is much higher and the global line width is wider than those in SiO2 gel. The relationship between the composition and structure of gels and the fluorescence intensity and width were discussed. The obtained ormocer shows good mechanical strength, which can be cut and polished in machine without broken.     

Monolithic Catalysts with Low Noble-Metal Content for Exhaust Purification of Small Gasoline Engines

A series of low noble-metal coment monolithic catalysts for exhaust purification of small gasoline engines was investigated, and it was found that the Pt/Rh-OSM/Al2O3 （where OSM was oxygen storage material） catalyst with Ce0.5Zr0.5-MnOx（3%MnOx） OSM held low light-off temperature for CO, HC, and NO; quite wide three-way window, and outstanding thermal stability. The catalyst could efficiently comrol exhaust emission of small gasoline engines.     

预转变马氏体对GCr15钢贝氏体转变动力学的影响SCIEI

本文利用磁性法和膨胀法研究了GCr15钢M_s点以下贝氏体转变动力学以及不同温度预转变马氏体对240℃等温时贝氏体转变动力学的影响。试验结果表明,过冷奥氏体在M_s点以下等温过程中首先形成变温马氏体,继而转变为下贝氏体。随着等温温度的降低和预淬马氏体数量的增加,应力促发作用有助于贝氏体转变的加速,200℃左右其孕育期最短。但是,当温度继续下降、预淬马氏体超过一定数量之后,贝氏体转变却愈趋困难,此外,M_s点以下不同温度的预转变马氏体对随后240℃等温时贝氏体转变动力学影响的研究结果,也具有相同的特性。     

Effect of preparation conditions on the properties of a coal-derived activated carbon honeycomb monolith

Activated carbon honeycomb (ACH) monoliths were prepared by extruding of a mixture of bituminous coal and organic additives and subsequent carbonization and steam activation. Preparation parameters that were varied were carbonization temperature and activation time. The carbonization conditions were 500, 650 and 800 °C for 1 h and the steam activation conditions were 850 °C for 2, 4 and 6 h. The monoliths at various states were characterized by SEM, XRD, nitrogen adsorption and compression test. It was found that carbonization temperature has significant effects on pore size distribution and mechanical strength of ACH monoliths. The ACH monoliths prepared from high carbonization temperatures exhibited lower values of the BET surface area and total pore volume and higher value of the mechanical strength than those of the ACH monoliths prepared from low carbonization temperatures. This was attributed to the effect of high temperature carbonization that results in the formation of relatively less defective structures.     

三石─堇青石匣钵的研制

引入“三石”改善堇青石质匣钵性能,提高匣钵使用寿命。     

Zn:Fe:LiNbO3单晶的坩埚下降法生长及其成分研究

通过优选合适的化学原料，用坩埚下降法生长出了无宏观缺陷的Zn：Fe：LiNbO3(Zn：Fe：LN)单晶。生长的工艺参数是：用微凸生长界面生长，生长速度为1～3mm／h，温度梯度为20～30℃／cm。用X射线衍射及DTA对晶体进行了分析；测定了晶体的吸收光谱。结果表明：所有Zn：Fe：LN晶体中的Fe^2 浓度沿生长方向增加；掺杂3％ZnO(摩尔分数)的Zn：Fe：LN单晶中的Fe^2 浓度沿生长方向的变化量比掺杂6％ZnO的大。从坩埚下降法的温场特点、晶体的热处理过程、环境气氛，以及ZnO组分对Fe离子的排斥作用解释了产生Fe^2 离子浓度变化的原因。     

K2CO3生产中NH4Cl废水的回收技术

分析了反渗透的基本原理，详细介绍了采用反渗透膜分离技术回收利用K2CO3生产过程中产生的含NH4Cl废水的工艺过程。处理低浓度含NH4Cl废水100m^3／h和高浓度含NH4Cl废水40m^3／h工业化装置建成投产后，处理前低浓度废水含NH4Cl1000mg／L，高浓度废水含NH4Cl10000mg／L，pH=8～10；处理后，产品淡水含NH4Cl≤10mg／L、pH=7～8，产品浓水含NH4Cl≥60000mg／L、pH=8～lO。该装置的投运，取得了明显的经济效益和社会效益。