Alternating active-phase algorithm for multimaterial topology optimization problems: a 115-line MATLAB implementation

Structural and Multidisciplinary Optimization - A new algorithm for the solution of multimaterial topology optimization problems is introduced in the present study. The presented method is based on...     

Bending-stretching analysis of thick functionally graded micro-plates using higher-order shear and normal deformable plate theory

In the present article, higher-order shear and normal deformable plate theory together with modified couple stress theory are developed to study the bending analysis of thick functionally graded rectangular micro-plates. One material length scale parameter is used for capturing the size effects. Utilizing the variational approach and also a principle of virtual displacement, a new form of equilibrium equations and the corresponding boundary conditions are derived. It is assumed that material properties vary through the thickness according to the power law function. Finally, an analytical solution for the bending problem of a simply supported FG rectangular micro-plate is presented.     

PBSVM: Partitioning and biased support vector machine for vocal fold pathology assessment using labeled and unlabeled data sets

Most of the existing classification methods, used for voice pathology assessment, are built based on labeled pathological and normal voice signals. This paper studies the problem of building a classifier using labeled and unlabeled data. We propose a novel learning technique, called Partitioning and Biased Support Vector Machine Classification (PBSVM), which tries to utilize all the available data in two steps: (1) a new heuristically partition-based algorithm, which extracts high quality pathological and normal samples from an unlabeled set, and (2) a more principle approach based on biased formulation of support vector machine, which is fairly robust to mislabeling and unbalance data problem. Experiments with wavelet-based energy features extracted from sustained vowels show that the new recognition scheme is highly feasible and significantly outperform the baseline classical SVM classifier, especially in the situation where the labeled training data is small.     

Research trends in gender differences in higher education and science: a co-word analysis

The aim of this study is to map and analyze the structure and evolution of the scientific literature on gender differences in higher education and science, focusing on factors related to differences between 1991 and 2012. Co-word analysis was applied to identify the main concepts addressed in this research field. Hierarchical cluster analysis was used to cluster the keywords and a strategic diagram was created to analyze trends. The data set comprised a corpus containing 652 articles and reviews published between 1991 and 2012, extracted from the Thomson Reuters Web of Science database. In order to see how the results changed over time, documents were grouped into three different periods: 1991–2001, 2002–2007, and 2008–2012. The results showed that the number of themes has increased significantly over the years and that gender differences in higher education and science have been considered by specific research disciplines, suggesting important research-field-specific variations. Overall, the study helps to identify the major research topics in this domain, as well as highlighting issues to be addressed or strengthened in further work.     

Experimental Investigation on the Removal of p-Toluic Acid from Aqueous Solution using Functionalized Polymeric Sorbent

Polystyrene-divinylbenzene copolymer (PsDVB) was covalently functionalized with monoethanolamine (MEA), diethanolamine (DEA), and triethanolamine (TEA) by a simple method. The functionalized sorbents were characterized in terms of functionality and morphology, and used for the removal of p-toluic acid (p-TA) from aqueous solution. It was found that DEA-PsDVB has higher adsorption capacity than MEA- and TEA-PsDVB due to more accessible nitro and hydroxyl groups on its surface. Further investigation on the adsorptive properties of DEA-PsDVB indicated that the maximum uptake of p-TA occurred at the optimum pH of 5.3. The kinetics data was successfully represented by the pseudo-first-order model, and the behavior of the adsorption isotherms followed the Freundlich model well. Thermodynamic studies showed that the adsorption of p-TA onto DEA-PsDVB was an endothermic and spontaneous process along with the positive change in entropy. The regeneration of DEA-PsDVB was performed with 0.1 M NaOH solution, and results showed that 99% of the initial capacity was conserved after eight successive adsorption/regeneration cycles.     

Two-parameter TSCSP method for solving complex symmetric system of linear equations

We introduce a two-parameter version of the two-step scale-splitting iteration method, called TTSCSP, for solving a broad class of complex symmetric system of linear equations. We present some conditions for the convergence of the method. An upper bound for the spectral radius of the method is presented and optimal parameters which minimize this bound are given. Inexact version of the TTSCSP iteration method (ITTSCSP) is also presented. Some numerical experiments are reported to verify the effectiveness of the TTSCSP iteration method and the numerical results are compared with those of the TSCSP, the SCSP and the PMHSS iteration methods. Numerical comparison of the ITTSCSP method with the inexact version of TSCSP, SCSP and PMHSS are presented. We also compare the numerical results of the BiCGSTAB method in conjunction with the TTSCSP and the ILU preconditioners.     

Overaluminizing of a CoNiCrAlY Coating by Inward and Outward Diffusion Treatments

Overaluminizing is a commercially accepted treatment to enhance high temperature oxidation resistance of MCrAlY overlay coatings. In the current investigation, a low pressure plasma-sprayed CoNiCrAlY coating was aluminized by two different growth modes: outward growth and inward growth. The resultant microstructures were characterized by means of scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction analysis. The results showed that the final microstructure of both types of overaluminized coatings was similar and included Al-rich NiAl and Ni-rich NiAl zones from the top to the bottom. The details of the microstructures are discussed and compared with the results of simple aluminizing of the nickel-based substrate.     

Effect of plate-like glass fillers on the mechanical properties of dental nanocomposites

In this study, glass flakes were incorporated into the spherical nanosilica component of the dental composites and its effect on the mechanical properties of these composites was investigated. To achieve a good interfacial adhesion between matrix resin and fillers, the particles were surface treated with a silane coupling agent (γ-MPS). Composites with different plate-like and spherical nanoparticle contents were prepared and their mechanical properties, including flexural strength, flexural modulus and fracture toughness were measured. The morphology of the particles and fracture surface of the composites were studied by SEM. The distribution of the flakes in the composite was also monitored using EDXA. Statistical analysis of the data was performed with ANOVA and the Tukey’s post hoc test was at a significance level of 0.05. The results showed that the flexural modulus and fracture toughness of specimens were improved with increasing the glass flake content up to 15 vol % which then declined upon further increase due to the stacking of the flakes on each other. A good interfacial adhesion was observed between matrix resin and particles in the SEM micrographs. The results of this study suggest that incorporation of glass flakes into the dental composites containing spherical nanosilica particles may enhance their mechanical properties.