Hinokitiol induces differentiation of teratocarcinoma F9 cells

Hinokitiol, a constituent of the wood of Chamaecyparis taiwanensis, was found to induce differentiation of teratocarcinoma F9 cells. When examined by the agar-overlay method, in which expression of plasminogen activator as a differentiation marker protein was detected, this compound exhibited a dose- and time-dependent induction. Induction of differentiation by hinokitiol occurred irreversibly and required its addition for more than 12h. Among its structure-related compounds tested, tropolone and two colchicine-related compounds exerted potent activities comparable to that of hinokitiol. These findings indicate that free tropolone structure in the molecules plays an essential role in inducing differentiation of F9 cells. Hinokitiol showed a strong inhibitory effect of DNA synthesis in very early stages of culture, suggesting that this effect may be responsible for triggering differentiation of F9 cells.     

Multiobjective dynamic load-dispatching method for optimal operation of power systems

A new practical method is proposed which gives a quasi-optimal solution of the dynamic load-dispatching problem formulated by a multiconstraint multiobjective optimization problem. Here, the multiple constraints are rate reserve constraints and power flow ones, and the multiple objectives are fuel cost and CO₂ emission. The proposed method is an integration of the following three techniques: (1) “Group Dispatch Scheme,” which is developed by the authors, is used to satisfy a violated constraint easily. This scheme consists of three steps. The first step is to classify all generators into two groups. One is the group which should be more loaded to satisfy the violated constraint, and the other is the should-be less loaded group. The second step is to add some load to the former group, and to subtract the same load from the latter. The third step is to dispatch each group load to each groups generators, respectively; (2) the dynamic load-dispatching algorithm is used which provides, in practical time, quasi-optimal generation trajectories; (3) the conventional weighting parametric method is used to obtain a Pareto optimal solution of multiobjective problems. The effectiveness of the method is clarified by a computer simulation on the actual power system of Kansai Electric Power Company.     

Evaluation for the curing characteristics of phenolic molding compounds by rockwell hardness test at an elevated temperature

Rockwell hardness measurement at an elevated temperature has been proposed as an evaluation method for the curing characteristics of thermosetting molding compounds. This method is convenient and has a high accuracy over a wide range of curing, Using a cone indenter, the following advantages are brought about: a good correspondence with acetone extraction test, in showing the degree of cure of the internal part of a molding rather than that of the skin layer, and a higher sensitivity in measuring higher degrees of cure. On examining curing behavior of commercial phenolic molding compounds by this method, an inflection point was observed on a plot of the hardness vs log curing time. This critical point has been called “the minimum cure time”, beyond which the molding exhibits good physical properties.     

Preparation of plasma-polymerized membranes from I-(trimethylsilyl)-I-propyne and gas permeability through the membranes

Summary Plasma-polymerized membranes for gas separation were prepared from 1-(trimethylsilyl)-1-propyne. The permeation data of He, H₂ 0₂, N₂, CO₂, and CH₄ through the membranes showed plasma-polymerized 1-(trimethylsilyl)-1-propyne had high permselectivity but low permeability compared with poly[l-(trimethylsilyl)-1-propyne]. This behavior is considered to be due to the crosslinking structure of the plasma-polymerized membrane. The correlation between plasma polymerization conditions and the membrane performance was studied. The optimum condition at which the deposition rate of the plasma polymer is maximized agreed with the optimum value to yield maximum separation factor of gases through the membrane.     

Determinants of the inhibitory action of purified 14-kDa phospholipases A2 on cell-free prothrombinase complex

It has been suggested (Kini, R. R., and Evans, H. J. (1987) J. Biol. Chem. 262, 14402-14407) that the anticoagulant activity of members of the 14-kDa phospholipase A2 (PLA2) family depends on the presence of basic residues within a variable surface region (residues 54-77) distinct from both the conserved catalytic machinery and surface sites mediating the antibacterial action of these enzymes (see Weiss, J., Inada, M., Elsbach, P., and Crowl, R. M. (1994) J. Biol. Chem. 269, 26331-26337). To further define the determinants of the anticoagulant activity of PLA2, we have analyzed the inhibitory effects of purified native and recombinant PLA2 on cell-free prothrombinase. Both native and recombinant wild-type pig pancreas (net charge -1) and human "secretory" PLA2 (net charge +15) produced similar dose-dependent inhibition of prothrombinase activity that was significantly less potent than a toxic PLA2 purified from snake venom. Site-specific mutations that either increased or decreased PLA2 activity toward bactericidal/permeability-increasing protein-treated Escherichia coli by up to 50-fold had no effect on antiprothrombinase activity. In contrast, substitution of Arg for Asp-59/Gly for Ser-60 in the pig PLA2 increased antiprothrombinase activity by 5-10-fold without affecting catalytic activity toward a range of phospholipid substrates or antibacterial activity. Comparison of antiprothrombinase activity of catalytically active and inactive forms of the PLA2 and under a range of phospholipid conditions revealed that the potent antiprothrombinase activity of native toxic venom PLA2 and of the D59R.S60G mutant pancreatic PLA2 reflect combined catalytic and noncatalytic actions, the latter apparently dependent on basic residues at discrete surface sites in the enzyme.     

Origin of electron mobility enhancement in (1 1 1)-oriented InGaAs channel metal-insulator-semiconductor field-effect-transistors

Electrical and physical characteristics of the Al₂O₃/InGaAs interfaces with (1 1 1)A and (1 0 0) orientations were investigated in an attempt to understand the origin of electron mobility enhancement in the (1 1 1)A-channel metal-insulator-semiconductor field-effect-transistor. The (1 1 1)A interface has less As atoms of high oxidation states as probed by X-ray photoelectron spectroscopy. The electrical measurements showed that energy distribution of the interface traps for the (1 1 1)A interface is shifted toward the conduction band as compared to that for the (1 0 0) interface. Laterally-compressed cross-section transmission electron microscopy images showed that the characteristic lengths of the interface roughness are different between the (1 1 1)A and (1 0 0) interfaces. The contributions of the Coulomb and roughness scattering mechanisms are discussed based on the experimental results.     

Block Copolymer Permeable Membrane with Visualized High‐Density Straight Channels of Poly(ethylene oxide)

A simple fabrication, scalable to centimeter scale, of a permeable membrane made of block copolymer containing molecular transport channels is demonstrated by coating photo‐crosslinkable liquid‐crystalline block copolymer, consisting of poly(ethylene oxide) (PEO) and poly(methacrylate) (PMA) bearing stilbene (Stb) mesogens in the side chains (PEO₁₁₄‐b‐PMA(Stb)₅₂), onto a sacrificial cellulose acetate film substrate. After thermal annealing, perpendicularly aligned and hexagonally arranged PEO cylindrical domains with a surface density of 10¹¹ cm^?2 were formed and then fixed efficiently by photo‐crosslinking the stilbene moieties in the PMA(Stb) domains by [2 + 2] dimerization. The fully penetrating straight PEO cylindrical domains across the 480‐nm‐thick membrane were well‐defined and visualized as molecule‐transport channels. After exfoliated by removal of the cellulose acetate layer, the membrane could be transferred onto another substrate by either scooping or a horizontal lifting method. Throughout the processes, the fully penetrating PEO channels across the membrane are preserved to open at both ends. A simple permeation experiment demonstrates that rhodamine dyes permeate efficiently through the PEO cylindrical channels of the annealed membrane but not across a non‐annealed one.     

Effectiveness of an energy-consumption information system for residential buildings

The authors have proposed a method of reducing the energy consumption in residential buildings by providing household members with information on energy consumptions in their own houses. An on-line interactive “energy-consumption information system” that displays power consumptions of, at most, 18 different appliances, power and city-gas consumption of the whole house and room temperature, for the purpose of motivating energy-saving activities has been constructed and the effectiveness of the system investigated by installing it in 10 residential buildings. The experiment showed that energy-saving consciousness was raised and energy consumption was in fact reduced by the energy-saving activities of the household members. In this paper, the system is described in detail and the effectiveness of reducing energy-consumption of the whole house and for space heating will be discussed. Also the energy-saving activities in a certain household are shown by using load duration curves.     

Effect of green compact structure on the sintering of alumina

The effect of particle agglomeration on sintering has been studied by slipcasting suspensions with pH values ranging from 2 to 11. The rate of densification has been found to depend on the degree of agglomeration. Complete dispersion of alumina primary particles has not been attained through adjustment of pH of suspensions, and agglomerates also remained in the best-dispersed suspension. Elimination of the agglomerates by sedimentation lowered the densification temperature of slip-cast compacts. The grain size-density curve is a function of temperature. High-density and small-grained sintered bodies were obtained by low-temperature long-time firing.     

Sterols,methylsterols, and triterpene alcohols in threeTheaceae and some other vegetable oils

The unsaponifiables from threeTheaceae (Camellia japonica L.,Camellia Sasanqua Thunb., andThea sinensis L.) oils and alfalfa, garden balsam, and spinach seed oils and shea fat were separated into four fractions: sterols, 4-methylsterols, triterpene alcohols, and less polar compounds by thin layer chromatography. While the sterol fraction was the major one for the unsaponifiables from alfalfa and spinach seed oils, the triterpene alcohol fraction was predominant for the unsaponifiables from all other oils. The sterol, 4-methylsterol, and triterpene alcohol fractions were analyzed by gas chromatography. All the sterol fractions were alike in their compositions, consisting exclusively of Δ⁷-sterols, such as α-spinasterol and Δ⁷-stigmastenol as predominant components together with Δ⁷-avenasterol and 24-methylcholest-7-enol. Obtusifoliol, gramisterol (occasionally accompanied with cycloeucalenol), and citrostadienol, together with several other unidentified components, were found in the 4-methylsterol fractions from all of the oils except shea fat. The 4-methylsterol fraction from shea fat showed a characteristic composition containing a large proportion of unidentified components which had relative retention time greater than that of citrostadienol, while no citrostadienol was detected. β-Amyrin, lupeol, and butyospermol were major components of the triterpene alcohol fractions from most of the oils, but the fraction from spinach seed oil contained cycloartenol and 24-methylene-cycloartanol as predominant components. There is a close similarity in the compositions of unsaponifiables (sterols, 4-methylsterols, and triterpene alcohols) of the threeTheaceae oils. Two sterols, α-spinasterol and Δ⁷-stigmastenol, and five triterpene alcohols were isolated from tea seed oil. Moreover, five unidentified components beside parkeol, butyrospermol, α-amyrin, and lupeol were isolated from the triterpene alcohol fraction of shea fat.