Doped oxides of cerium as inorganic colorants

The colour of inorganic colorants is based on metal ions such as cadmium, lead, chromium or cobalt, the majority of which are unfortunately potentially toxic. Thus, there is in a need to introduce alternative metal or metal oxides, which would be environmentally friendly and economically viable as a replacement for potentially toxic inorganic colorants. Rare earth-based colorants offer an additional opportunity for the development of optically pure colours. In this study, a replacement for potentially toxic colorants has been sought through the use of a rare earth metal ion, cerium. Appropriate doping of cerium oxides with molybdenum and iron gives an orange–red colorant. The conditions ideal for optimal colour have been standardised and the resultant colorant characterised through powder X-ray diffraction techniques, particle size measurement, etc. The colorants exhibit good hiding power and tinting strength.     

An eco‐efficient rationalized leather process

BACKGROUND: The leather industry is under pressure to develop environmentally efficient leather‐making processes to comply with modern pollution and discharge legislation. Conventional leather‐processing methods are known to contribute significant pollution loads in tannery wastewaters. The rationalized process described here involves a salt‐free curing, lime and sulfide‐free beamhouse process and post‐tanning followed by tanning employing a reverse leather‐processing technique. RESULTS: Scanning electron microscopy (SEM) analysis substantiated that the grain surface, fibre separation and tight packing of fibres are similar for leathers from conventional and rationalized processes. The functional performance of the leathers is found to be on par with that of conventionally processed leathers. The rationalized leather process reduces the usage and discharge of chemicals by 68% and 82%, respectively. It also enjoys the reduction in biochemical oxygen demand (BOD), chemical oxygen demand, Cl^?, SO₄^2? and total solids loads by 58%, 62%, 95%, 66% and 85%, respectively. The rationalized process also results in reduction of water consumption and discharge and energy by 37%, 37% and 38%, respectively. CONCLUSION: The rationalized process utilizes resources efficiently with reduced environmental impact without compromising leather qualities and can be seen as being eco‐efficient compared to the conventional leather process. Copyright © 2007 Society of Chemical Industry     

Colored cool colorants based on rare earth metal ions

Colored pigments with high near infrared reflectance and not based on toxic metal ions like cadmium, lead and cobalt are being sought as cool colorants. Through appropriate doping two pigments Ce-Pr-Mo and Ce-Pr-Fe have been developed to offer a reddish brown and reddish orange color, respectively. These pigments have been characterized and found to be highly crystalline with an average size of 300 nm. A shift in band gap energy from 2.21 to 2.18 eV has been observed when Li₂CO₃ was used as a mineralizer. Scanning electron microscope-energy dispersive X-ray analysis (SEM-EDAX) measurement indicate a uniform grind shape and distribution of metal ion, with over 65% reflectance in the NIR region, these pigments can well serve as cool colorants.     

Irradiation Target Cooling Using Circular/Slot Air Jet

To study the effect of irradiation on materials, sample coupons are irradiated in cyclotron facilities. During the irradiation process, these samples produce significant heat. This heat needs to be continuously removed from the samples in order to avoid melting of the samples as well as to keep the samples at a particular temperature during irradiation. The area available for heat transfer is limited due to small size of the samples. To increase the heat transfer rate, jet cooling is used as it provides large heat transfer co-efficient. To understand the heat transfer characteristics of jet cooling under these conditions, experiments have been carried out. Two inclined jets hitting on both sides of the target plate give maximum cooling and uniform temperature distribution. This paper gives the details of the numerical and experimental studies carried out and the discussions about the results obtained.     

铁鞣新方法(续)

将铁鞣与铬鞣进行了优化结合,这种鞣制技术不仅可以加工出质量上乘的皮革制品,同时又可以满足废液中铬与铁的含量低于100mg/kg的标准。此工艺制造的皮革可耐沸水试验,阐述了其鞣制技术和鞣制机理。对铁鞣法在加工山羊绒面革和绵羊全粒面服装革中出现的问题进行了研究。用扫描电镜对鞣革的结构特性进行了研究,对成革的物理机械性能及染色特性也做了分析和阐述。     

A wideband radar for high-resolution mapping of near-surface internal layers in glacial ice

Snow accumulation rate is an important parameter in determining the mass balance of polar ice sheets. Accumulation rate is currently determined by analyzing ice cores and snow pits. Inadequate sampling of the spatial variations in the ice sheet accumulation has resulted in accumulation rate uncertainties as large as 24%. We designed and developed a 600-900-MHz airborne radar system for high-resolution mapping of the near-surface internal layers for estimating the accumulation rate of polar ice sheets. Our radar system can provide improved spatial and temporal coverage by mapping a continuous profile of the isochronous layers in the ice sheet. During the 2002 field season in Greenland, we successfully mapped the near-surface layers to a depth of 200 m in the dry-snow zone, 120 m in the percolation zone, and 20 m in the melt zone. We determined the water equivalent accumulation rate at the NASA-U/spl I.bar/1 site to be 34.9/spl plusmn/5.1 cm/year from 1964 to 1992. This is in close agreement with the ice-core derived accumulation rate of 34.6 cm/year for the same period.     

Gelatinisation Characteristics of Cassava Starch Settled in the Presence of Different Chemicals

Addition of chemicals during the extraction of cassava starch for enhancing the settling rate, whiteness and compactness of the settled starch is an accepted commercial practice. The effect of addition of selected chemicals such as acids (sulphuric and hydrochloric acids), bleaching and oxidising agents (sodium metabisulphite and sodium hypochlorite) and alum during settling on the thermal and pasting properties of the cassava starch was examined. Treatment with sulphuric acid produced a noticeable increase in all DSC gelatinisation parameters, viz. onset gelatinisation temperature (T_o), temperature at peak minimum (T_p) and end temperature (T_e), with increasing concentration of acid, while only a marginal shift could be obtained even at higher concentration of hydrochloric acid. However, no major effect resulted from treatment with sodium metabisulphite, sodium hypochlorite and alum. The gelatinisation enthalpy was hardly affected by the treatments. An exception was hydrochloric acid, which brought about a perceptible decrease in enthalpy at higher concentrations indicating that starch crystallinity is influenced to a small extent by hydrochloric acid. Pasting characteristics studied using a Rapid Visco Analyser showed that sulphuric acid, even at the lowest concentration (5 mM), considerably affected the structural characteristics of cassava starch, while hydrochloric acid induced similar effect only at higher concentrations. Alum reduced the paste viscosity while the bleaching agents (sodium metabisulphite and sodium hypochlorite) were not so effective in modifying the starch viscosity characteristics.     

Prediction of an iron oxide concentration in the induction smelting process

Induction smelting process, ISP, is a direct smelting process in which self-fluxed composite pellets (made of iron ore, brown coal and lime) are melted in a single phase induction furnace in conjunction with top blown oxygen. A mass transfer model to predict the concentration of iron oxide, has been developed for this process. Transient mass balance equation with complex boundary conditions has been worked out by adopting a relatively new approach known as the cell model approach. These equations have been solved numerically using finite difference technique to obtain the iron oxide concentration profile in the induction smelting process. Numerical and experimental results obtained for the iron oxide concentration show a reasonable agreement with each other.