Growth of β-FeSi2 layers deposited from a molten salt

β-FeSi₂ layers have been successfully grown using a molten salt method for the first time. It was found that single phase and homogeneous β-FeSi₂ layers with a columnar domain structure can be grown on FeSi substrates. The layer thickness was demonstrated to be controllable by the growth temperature and time, and was diffusion controlled. It was shown that the layers were void- and crack-free compared to similar layers grown on Fe substrates: this difference is explained in terms of Fe diffusion. This vacuum-free simple growth technique is useful for the fabrication of large area semiconductor devices at low cost.     

Superconductivity in the tetragonal phase of La1.9Bi0.1CuO4+δ annealed under high oxygen pressure

We have investigated the relation between the crystal structure and superconductivity in La_1.9Bi_0.1CuO_4+δ , in which the phase separation observed in La₂CuO_4+δ is suppressed. A phase diagram in theT?δ plane is given for La_1.9Bi_0.1CuO_4+δ with excess oxygen. For very smallδ values, the crystal structure is orthorhombic, and an orthorhombic-tetragonal phase transition occurs markedly atδ ～ 0.03 in the measured temperature range between 13 and 293 K. Superconductivity is observed in the range of 0.04<δ<0.11. This is clear evidence thathigh-T _c superconductivity also appears in the tetragonal phase.     

Optimal production-inventory policy for make-to-order versus make-to-stock based on the M/Er/1 queuing model

This paper analyzes a multi-product production / inventory system where demands for each item arrive according to a Poisson process and the production time for each product has an Erlang distribution. The paper proposes an optimality condition that specifies whether each product should be produced make-to-stock or make-to-order. In the event a product should be produced make-to-stock, an approach for computing the optimal base-stock level is proposed. Numerical examples are given for illustrative purpose.     

Spectral attenuation measurement for fluoride glass single-mode fibres by Fourier transform techniques

A new spectral attenuation measurement system using a Fourier transform spectrometer is developed. The Fourier transform spectral attenuation measurement (FT-SAM) system makes the signal acquisition time for a wide wave-length range of 1.0?4.2? much shorter than measurement with a conventional dispersive spectral attenuation measurement system. The spectral attenuation for a fluoride glass single-mode fibre, with a minimum loss of 3±1 dB/km at 2.5?m, is measured with this system.     

Identification of osteopontin in human dental calculus matrix

Osteopontin is a prominent non-collagenous component of bone matrix, although it is expressed in several other tissues. Recently, osteopontin was reported to be involved in urinary stone formation and atherosclerotic lesions of the aorta, suggesting that it may be a key protein associated with these types of pathological mineralization. In this study, whether or not human dental calculus contains osteopontin was investigated by immunoblotting and immunohistochemical analyses. After extraction of calculus proteins with EDTA and separation of the proteins by electrophoresis, immunoblotting analysis revealed the presence of osteopontin. Two forms of osteopontin appeared at 61 and 68 kDa on 10% polyacrylamide gel and the proteins were digested with thrombin, a highly specific protease. Moreover, immunohistochemical analysis revealed that osteopontin was localized in dental calculus adherent to tooth roots. These findings indicate that osteopontin is, in fact, present in human dental calculus and may be involved in calculus formation as the stone matrix.     

Changes of biochemical markers during fracture healing

Clinical diagnosis of canine nasal mite (Pneumonyssoides caninum) infection is difficult due to the mite's location in the caudal nasal cavity and frontal sinuses. The current study was performed to evaluate the efficacy of milbemycin oxime in treating dogs with nasal mite infection. A prospective open uncontrolled study included 20 dogs with case histories indicating possible nasal mite infection. Inclusion criteria consisted of either nasal mites being demonstrated (group 1, four dogs), or suspicious clinical signs with no other apparent causes, combined with eosinophilia (group 2, 16 dogs). Milbemycin oxime 1 mg/kg was given orally three times at 10-day intervals. In 17 (85 per cent) dogs, clinical signs resolved completely following milbemycin therapy; within 10 days of the first treatment in 13 cases (group 1, four dogs; group 2, nine dogs) and within 14 days in four cases. In the remaining three dogs clinical signs persisted but were diminished.     

Supramolecular Nanofibers from Collagen-Mimetic Peptides Bearing Various Aromatic Groups at N-Termini via Hierarchical Self-Assembly

Self-assembly of artificial peptides has been widely studied for constructing nanostructured materials, with numerous potential applications in the nanobiotechnology field. Herein, we report the synthesis and hierarchical self-assembly of collagen-mimetic peptides (CMPs) bearing various aromatic groups at the N-termini, including 2-naphthyl, 1-naphtyl, anthracenyl, and pyrenyl groups, into nanofibers. The CMPs (R-(GPO)_n: n > 4) formed a triple helix structure in water at 4 °C, as confirmed via CD analyses, and their conformations were more stable with increasing hydrophobicity of the terminal aromatic group and peptide chain length. The resulting pre-organized triple helical CMPs showed diverse self-assembly into highly ordered nanofibers, reflecting their slight differences in hydrophobic/hydrophilic balance and configuration of aromatic templates. TEM analysis demonstrated that 2Np-CMP_n (n = 6 and 7) and Py-CMP₆ provided well-developed natural collagen-like nanofibers and An-CMP_n (n = 5–7) self-assembled into rod-like micelle fibers. On the other hand, 2Np-CMP₅ and 1Np-CMP₆ were unable to form nanofibers under the same conditions. Furthermore, the Py-CMP₆ nanofiber was found to encapsulate a guest hydrophobic molecule, Nile red, and exhibited unique emission behavior based on the specific nanostructure. In addition to the ability of CMPs to bind small molecules, their controlled self-assembly enables their versatile utilization in drug delivery and wavelength-conversion nanomaterials.     

Gas transport properties of 6FDA-TAPOB hyperbranched polyimide membrane

Physical and gas transport properties of the hyperbranched polyimide prepared from a triamine, 1,3,5-tris(4-aminophenoxy)benzene (TAPOB), and a dianhydride, 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA), were investigated and compared with those of linear-type polyimides with similar chemical structures prepared from diamines, 1,4-bis(4-aminophenoxy)benzene (TPEQ) or 1,3-bis(4-aminophenoxy)benzene (TPER), and 6FDA. 6FDA-TAPOB hyperbranched polyimide exhibited a good thermal stability as well as linear-type analogues. Fractional free volume (FFV) value of 6FDA-TAPOB was higher than those of the linear-type analogues, indicating looser packing of molecular chains attributed to the characteristic hyperbranched structure. It was found that increased resistance to the segmental mobility decreases the gas diffusivity of 6FDA-TAPOB, in spite of the higher FFV value. However, 6FDA-TAPOB exhibited considerably high gas solubility, resulting in high gas permeability. It was suggested that low segmental mobility and unique size and distribution of free volume holes arising from the characteristic hyperbranched structure of 6FDA-TAPOB provide effective O₂/N₂ selectivity. It is concluded that the 6FDA-TAPOB hyperbranched polyimide has relatively high permeability and O₂/N₂ selectivity, and is expected to apply to a high-performance gas separation membrane.     

Synthesis of High-Purity Zirconium Fluoride for Fluoride Glass Fibers by Chemical Vapor Deposition

A technique for synthesizing ultra-high-purity ZrF₄ using chemical vapor deposition in a ZrBr₄–HF system is developed and a purification mechanism is clarified. The Fe concentration in ZrF₄ is evaluated at less than 10 ppb based on analysis of the transmission loss spectrum of a fiber prepared using synthesized ZrF₄. Purification is achieved mainly in a sublimation process of ZrBr₄, and purification efficiency is determined by sublimation temperature and activity of impurities in ZrBr₄. The concentration of transition-metal impurities in ZrF₄, synthesized by chemical vapor deposition in the ZrBr₄–HF system, is expected to be less than 1 ppb.     

Copolymerizations of macromonomer prepared by addition-fragmentation chain transfer polymerization of methyl acrylate trimer

Summary An oligomer of the methyl acrylate unsaturated trimer bearing 2-carbomethoxy-2-propenyl ω-end group (M _n = 1300, M _w/M _n = 1.7, and functionality > 0.7) was copolymerized as a macromonomer (0.02 mol/L) with styrene (1.0 mol/L) in benzene at 60 °C. The amounts of monomer and macromonomer in the feed simultaneously decreased with increasing time to indicate copolymer formation, and the macromonomer was found to be as reactive as styrene toward poly(styrene) radicals. The M _ns of the copolymers were 13900–22000 depending on conversion. No resonance due to the unsaturated <ω-end group bound to the poly(styrene) chain was detected by ¹H-NMR spectroscopy, indicating that no fragmentation of adduct radical of the end group to expel the poly(methyl acrylate trimer) radical. Polymerization of ethyl methacrylate (1.0 mol/L) in the presence of the macromonomer (0.02 mol/L) resulted in a mixture of the unreacted macromonomer and homopolymer of ethyl methacrylate. No end group bound to the poly(ethyl methacrylate) was detected by ¹H-NMR spectroscopy, excluding the possibility of addition fragmentation chain transfer to the macromonomer to expel an oligomer radical of the methyl acrylate trimer. Addition of the poly(methacrylate) radical to the macromonomer is extremely slow under the present conditions of copolymerization. Received: 27 March 2003/Revised version: 30 April 2003/ Accepted: 30 April 2003 Correspondence to Bunichiro Yamada