Flame Front Deformation Instabilities of Filtration Combustion for Initial Thermal Perturbation

The flame front deformation instability of low-velocity filtration combustion within an inert packed bed is studied based on the initial preheating non-uniformity. Based on the experimental phenomena, an initial thermal perturbation model is numerically proposed so as to predict the deformation behaviors of the flame front instabilities. The numerical prediction indicates that the assumption of an initial thermal perturbation is a feasible explanation as the cause of the flame front inclination instability. As the initial thermal perturbation increases, the phenomena of the flame front break and shrinking instabilities could easily occur at high filtration velocity or low equivalence ratio. Moreover, the evolutions of the flame front break rate and the shrinking rate are quantitatively analyzed.     

一种提高低温流体比体积计算精度的方法

采用了一个既能提高立方型状态方程比体积计算精度，又不影响气液平衡条件的简单摩尔修正项来改进PR方程比体积的计算。本文对19种低温流体给出其修正项的值，计算饱和蒸气和液体比体积，并与未修正的PR方程的计算值比较，结果表明这种修正能显著提高低温流体（包括量子流体氢、氦和强极性的氨气）饱和液体比体积的计算精度，并对蒸气比体积的计算也略有改进。     

鞍钢1780mm热轧生产线"三电"工程施工概述

概述了鞍钢1780mm生产线技术改造工程中供电、传动及自动控制系统的构成、安装及调试技术要点,以及技术经济效果评述,可供同类工程施工参考.     

铸造湿型小件缺陷产生的原因与控制

通过对铸造湿型小件产品缺陷典型实例的原因分析，从型砂的选择及配制、造型工艺、浇注工艺等方面提出控制缺陷产生的工艺方法。     

催化重整装置的几点设计改进

以一套500kt/a规模的催化重整装置的设计为例进行分析和讨论，提出对今后催化重整装置设计的几点改进建议，包括原料的加氢预处理流程，提纯重整产氢，优化预分馏塔及稳定塔的塔盘层数，选择合适的预加氢进料换热器及甲苯塔、二甲苯塔的加压操作等。     

Co－Mo／MgO－Al_2O_3一氧化碳耐硫变换催化剂失活原因的探讨

采用程序升温硫化（ＴＰＳ）技术，微反—色谱法（ＭＲＣ）、扫描电镜、透射电镜和其它分析测试手段，对工业应用前后的Ｃｏ－Ｍｏ系耐硫变换催化剂Ｋ８－１１进行了分析，从而对其失活原因进行了分析和讨论     

LDPE/石墨导电复合材料的研究

为了制备具有低渗滤阈值的导电复合材料，通过溶液插层法，选用三种不同的导电填料（石墨，膨胀石墨，膨化石墨），引入马来酸酐接枝聚乙烯。制备低密度聚乙烯/石墨导电复合材料，导电填料的结构对复合材料的电性能和力学性能有很大的影响，其中膨化石墨可使复合体系具有较低的导电渗滤阈值，但复合材料的力学性能较差。     

Synthesis,characterization, and optoelectronic properties of two new polyfluorenes/poly(p‐phenylenevinylene)s copolymers

Two novel copolymers of polyfluorenes/poly(p‐phenylenevinylene)s copolymers with p‐tert‐butyl‐phenylenemethylene groups in the C‐9 position of alternating fluorene unit, poly[1,4‐(2,5‐dibutyloxyl)‐phenyleneviny lene‐alt‐9‐(p‐tert‐butyl‐phenylenemethylene)fluorene] and poly[1,4‐(2,5‐dioctyloxyl)‐phenylenevinylene‐alt‐9‐(p‐tert‐butyl‐phenylenemethylene)fluorine], have been synthesized via the Heck polycondensation reaction. The synthesized polymers were characterized by FTIR, NMR, DSC, TGA, UV–vis, and PL spectra. The polymers showed high glass transition temperatures and good thermal stability. A polymer light‐emitting diode with the configuration ITO/PEDOT:PSS/P2/Ca/Al has been fabricated. The device emitted a yellow light with a peak wavelength of 578 nm similar to the PL spectra of the copolymer film. A maximal luminance of 534 cd/m² was obtained at a driving voltage of 24.5 V. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3955–3962, 2006     

Poly(l-lactide) comb polymer brushes on the surface of clay layers

Poly(l-lactide) (PLLA) comb polymers on poly(hydroxyethyl methacrylate) (PHEMA) backbone were prepared on the surface of clay layers by a combination of in situ atom transfer radical polymerization (ATRP) and ring-opening polymerization. An ATRP initiator with a quaternary ammonium salt end group was intercalated into the interlayer spacing of clay. PHEMA polymer brushes on the surface of clay layers were prepared by in situ ATRP. PLLA comb polymers on PHEMA backbone were prepared by ring-opening polymerization. X-ray diffraction (XRD) and transmission electron microscopy (TEM) results showed that with the increase of comb chain length more and more exfoliated structure was created. Aggregation of wormlike comb polymer brushes on the surface of clay layers was observed by TEM. Differential scanning calorimeter (DSC) results indicated that both the melting points and glass transition temperatures of the comb polymer brushes increase with the increase of comb chain length. The equilibrium melting temperature of the comb polymer brush on the surface of clay layers is lower than cleaved polymer. An atomic force microscopy (AFM) image proves the formation of wormlike structure by cleaved comb polymers.     

基于SVM和CRF双层模型的FrameNet框架消歧

框架消歧指的是在给定的句子中根据目标词的上下文语境,自动识别出有歧义的目标词所属的框架。针对传统FrameNet框架消歧方法使用单一分类模型时没有考虑到目标词之间的联系而导致隐性特征难以被提取,以及分类结果比较依赖分类模型的性能及参数的设置的问题,提出了一种基于SVM和CRF双层模型的FrameNet框架消歧方法。该方法利用分治思想将框架消歧问题转化为对目标词的分类及序列标注。第一层SVM模型对输入的语料进行粗分类,得到分类标签序列;第二层CRF模型将文本序列和SVM模型的分类标签序列作为输入,将分类标签加入特征模板进一步进行序列标注。实验选取了FrameNet语义知识库中能够激起多个框架的18个词元,2?614条例句作为实验数据。实验结果显示,与传统方法相比,基于SVM和CRF的双层模型有较高的准确率,证明了该方法是一种较为适用的FrameNet框架消歧方法。