The objective of this study is to evaluate the potential for recovering fluorocarbons as measures for the abatement of global warming. In this study, we focused on the three different kinds of fluorocarbons: CFCs, HCFCs and HFCs, and targeted refrigerant use because of the availability of relevant data. We first estimated future fluorocarbon emissions from the targeted appliances; we next compared those emissions in the units of CO2 equivalent to the level of CO2 emissions in 1990 from a quantitative point of view. As the result of this study, it was found that fluorocarbon emissions in 1999 and 2010 would be equal to approximately 7 and 3% of the level of CO2 emissions in 1990 respectively. Moreover, if we implement a 100% recovery rate in every recovery route, we can reduce a large amount of emissions which correspond to approximately 2–5% of the level of CO2 emissions in 1990, even if we take into account the energy-related CO2 emissions by the transportation and decomposition of fluorocarbons. 相似文献
Solitary DFB laser diodes with 174 kHz beat linewidth are applied to a 10 Gbit/s optical BPSK homodyne detection system for the first time: a sensitivity of -38.9 dBm was achieved. A three-electrode laser forms the local oscillator and is modulated with a partial push-pull scheme to improve its frequency response 相似文献
BACKGROUND: Major depressive disorder is often marked by repeated episodes of depression. We describe recovery from major depression across multiple mood episodes in patients with unipolar major depression at intake and examine the association of sociodemographic and clinical variables with duration of illness. METHODS: A cohort of 258 subjects treated for unipolar major depressive disorder was followed up prospectively for 10 years as part of the Collaborative Depression Study, a multicenter naturalistic study of the mood disorders. Diagnoses were made according to the Research Diagnostic Criteria, and the course of illness was assessed with the Longitudinal Interval Follow-up Evaluation. Survival analyses were used to calculate the duration of illness for the first 5 recurrent mood episodes after recovery from the index episode. RESULTS: Diagnosis remained unipolar major depressive disorder for 235 subjects (91%). The median duration of illness was 22 weeks for the first recurrent mood episode, 20 weeks for the second, 21 weeks for the third, and 19 weeks for the fourth and fifth recurrent mood episodes; the 95% confidence intervals were highly consistent. From one episode to the next, the proportion of subjects who recovered by any one time point was similar. For subjects with 2 or more recoveries, the consistency of duration of illness from one recovery to the next was low to moderate. None of the sociodemographic or clinical variables consistently predicted duration of illness. CONCLUSION: In this sample of patients treated at tertiary care centers for major depressive disorder, the duration of recurrent mood episodes was relatively uniform and averaged approximately 20 weeks. 相似文献
In order to achieve an accurate design of polarization-insensitive semiconductor optical amplifiers based on tensile strained bulk InGaAsP, the reduction of strain in the active layer of the buried heterostructure and its influence on polarization sensitivity are analyzed numerically for the first time. The gain calculation, including the strain distribution in the active layer, is examined based on the k · p method for the different active layers. It is found that the strain introduced during the epitaxial growth is strongly reduced after regrowth of the burying layer. In an active layer having the aspect ratio of 1 : 4, the strain reduction causes more than a 0.5-dB deviation in the polarization sensitivity of the gain. From a comparison with the experimental results, it is shown that including the effect of the burying layer in the calculation gives an accurate determination of the amount of strain for the polarization independence 相似文献
Natural fiber‐reinforced biodegradable polyester composites were prepared from biodegradable polyesters and surface‐untreated or ‐treated abaca fibers (length ca. 5 mm) by melt mixing and subsequent injection molding. Poly(butylene succinate)(PBS), polyestercarbonate (PEC)/poly(lactic acid)(PLA) blend, and PLA were used as biodegradable polyesters. Esterifications using acetic anhydride and butyric anhydride, alkali treatment, and cyanoethylation were performed as surface treatments on the fiber. The flexural moduli of all the fiber‐reinforced composites increased with fiber content. The effect of the surface treatment on the flexural modulus of the fiber‐reinforced composites was not so pronounced. The flexural strength of PBS composites increased with fiber content, and esterification of the fiber by butyric anhydride gave the best result. For the PEC/PLA composites, flexural strength increased slightly with increased fiber content (0–20 wt.‐%) in the case of using untreated fiber, while it increased considerably in the case of using the fiber esterified by butyric anhydride. For the PLA composite, flexural strength did not increase with the fiber reinforcement. The result of soil‐burial tests showed that the composites using untreated fiber have a higher weight loss than both the neat resin and the composites made using acetylated fiber.
Flexural modulus of PBS composites as a function of fiber content. 相似文献
The polymerization of methyl methacrylate by tri-n-butylborane in the presence of amino acid esters was investigated. The binary systems of tri-n-butylborane and amino esters were found to be more effective for initiating the polymerization than tri-n-butylborane alone. Co-catalytic effects of amino acid esters were in the order: tyrosinate > glutamate > aspartate ? phenyl alaninate > serinate > glycinate. The rate of polymerization in a mixture of dimethylsulphoxide and toluene was proportional to the square root of the concentration of the initiator system, to the monomer concentration, and to the concentration of dimethylsulphoxide in the solvent. The overall energy of activation was estimated to be 4.6 kcal/mol for the tri-n-butylborane/methyl tyrosinate system. Copolymerization curves gave a typical free-radical character. 相似文献