Carbon Nanotubes Grown on the Surface of Cathode Deposit by Arc Discharge

Carbon nanotubes prepared by de arc discharge of graphite electrodes in He and CH₄ gas took markedly different morphology. Thick nanotubes embellished with many carbon nanoparticles were obtained by evaporation under high CH₄ gas pressure and high arc current. Thin and long carbon nanotubes were obtained under a CH₄ gas pressure of 50Torr and an arc current of 20A for the anode with a diameter of 6mm.     

Use of a YAP1 overexpression cassette conferring specific resistance to cerulenin and cycloheximide as an efficient selectable marker in the yeast Saccharomyces cerevisiae.

Drug-resistance markers for yeast transformation are useful because they can be applied to strains without auxotrophic mutations. However, they are susceptible to technical difficulties, namely lower transformation efficiency and the appearance of drug-resistant mutants without the marker. To avoid these problems, we have constructed a phosphoglycerate kinase (PGK) promoter-driven YAP1 expression cassette, called PGKp-YAP1. Yeast cells containing PGKp-YAP1 were resistant to cycloheximide, a protein synthesis inhibitor, and also to cerulenin, a fatty acid synthesis inhibitor, but not to other drugs tested. The transformation efficiency of PGKp-YAP1 using cerulenin selection was comparable to that using a URA3 auxotrophic marker when low concentrations of cerulenin were used. Non-transformed drug-resistant colonies did appear on the low-concentration cerulenin plates. However, these non-transformed colonies could easily be identified, based on their cycloheximide sensitivity and/or their resistance to aureobasidin A to which the transformants were sensitive. Therefore, the dual drug resistance of PGKp-YAP1 could be used as an effective selection for PGKp-YAP1 recipient cells. The PGKp-YAP1 marker was used to disrupt the LYS2 gene and to transform an industrial yeast strain, indicating that this marker can be used for efficient and reliable gene manipulations in any Saccharomyces cerevisiae strain.     

MITI projects on recycling

MITI has actively done R&D on industrial technology for waste and reclamation and so there are many research items from small scale to large scale. However, Ecofactory and researches on recycling of metallic materials are introduced here. Ecofactory was proposed by the Mechanical Engineering Laboratory and is now at the stage of the Leading Research, a new research scheme in AISt. Researches on recycling of metallic materials are being done with subsidy. Those researches should contribute to both the preservatin of the global environment and effective recycling of waste materials.Abbreviations AIST Agency of Industrial Science and Technology - MITI Ministry of International Trade and Industry - NEDO New Energy and Industrial Technology Development Organization     

R & D Needs - Drying of Ceramics

New research and development needs for the drying of ceramics are prooosed. The researches on the ceramic drying are briefly reviewed and the role of the drying in the ceramic production process iS summarized. The drying must deal with molded materials and the problem is of significant difference from another drying with particulate materials. It means that the drying must be performed with keeping the molded feature and the insufficient completion of drying and the careless operation influence directly on the product quality The importnance of the R & D on the heat and moisture transfer. shrinking mechanism. the deformation behavior and the strain-stress formation in the molded clay issuggested. The subjects are also pointed out for the further improvement of the ceramic drying process and the precise design of molding with high quality.     

Application of SiC-Si functionally gradient material to thermoelectric energy conversion device

Because of its high–temperature chemical stability, SiC ceramic is a promising material for high-temperature device applications such as thermoelectric energy converters. However, the electrical conductivity of SiC ceramic is too low for it to be used as a thermoelectric energy converter at the cold junction. Therefore, we propose a SiC-Si functionally gradient material (FGM) in order to improve the electrical conductivity of the SiC ceramic at the cold junction. An SiC rod was fired in a temperature gradient furnace. One end of the SiC rod was maintained at 2473 K and the other end was maintained at 1973 K for 30 min. After firing, the porous SiC edge fired at 1973 K was dipped into molten Si in order to infiltrate molten Si into the porous SiC. The microstructure of the FGM is classified into three regions: the SiC-Si composite material; the porous SiC ceramic; and the densified SiC ceramic. The electrical conductivity, the Seebeck coefficient and the thermal conductivity for each region of SiC-Si FGM was measured at 300 K; a figure of merit was calculated. The figure of merit of the SiC-Si FGM at the cold junction, at room temperature, was 10⁸ times higher than that of a nongradient SiC ceramic.     

An Electronic Approach to Materials Design

A molecular orbital approach to materials design has recently made great progress. This approach is based on the electronic structure calculations by the DV-Xα cluster method. In this paper recent progress in this approachis reviewed. In particular     

Drying-Induced Strain and Stress: A Review

This paper is to review the works on strains and suesses in materials during drying.The strains and suesses are caused when temperature and moisture gradients are generated in mterials whose volume changes with heating and moisture removal. In such materials. failure and irregular deformion may be generated which affect considerably the qudity of the products after drying. In the first part. modeling procedure is introduced for the analysis of the strain-stress behavior in elaslic. viscous and visccelastic materials combined with heat and moisture transfer. An overview of the works on swains and stresses and drying characteristics are presented for malerials such as porous media. clay. sol-gels. agricultural products and foods in the second part. There are some materials that show both elasticity of the solid phase and viscosity of the fluid phase ( water or solvena∥ or viscoelasticiry. The suesses are often correlated with a suction pressure of fluids in pores and the flow rate is based on Dacy's equation for the elastic and viscous tnedia and a kind of viscoelastic media. The general canstitulive equalions. for suains and svesses are often analyzed with the stain behavior given by a function of moisturr for some media ai well. The emohasis is on the inuoduclion of comprehensive criteria for undersunding the problems of strain and stress development in materials subjected to drying.     

Stability of metastable tetragonal ZrO2 in compound powders and nucleation arguments

ZrO₂-SiO₂ (11) mixtures and ZrO₂ particles were prepared by a sol-gel method from the solutions of ZrOCl₂·8H₂O (ZOC) + Si(OC₂H₅)₄ (TEOS) + C₂H₅OH and ZOC + C₂H₅OH + H₂O + NH₄Cl systems, respectively. Quantitative changes of phase crystallized by heating were compared with those of ZOC + TEOS + H₂O and/or ZrO(NO₃)₂ · 2H₂O + H₂O systems, respectively. The stability of metastable tetragonal (mt)-ZrO₂ particles depends on the Young's modulus of the SiO₂ matrix. Transition metal oxides existing on the interface assisted in stabilizing mt-ZrO₂. The order of the assistance agreed with that of the relative field strengths of their oxides. A relationship between the ionic radius and the volatility of anionic groups, and the difficulty of nucleation for the martensitic transformation accompanying a shear stress, is suggested.