Pressure-induced transparency of MgO,Al2O3, AlN,and cBN ceramics at room temperature

The in situ axial X-ray diffraction patterns of four ceramic powder samples (MgO, Al₂O₃, AlN, and cBN) that were compressed in a diamond anvil cell under uniaxial non-hydrostatic conditions were recorded. The microscopic deviatoric stress as a function of the pressure was determined from the X-ray diffraction peak broadening analysis: the curves increased approximately linearly with the pressure at the initial compression stage and then levelled off under further compression. Pressure-induced transparency was observed in all of the samples under compression, and the pressure at the turning point on the curves of the microscopic deviatoric stress versus pressure corresponded to the pressure at which the samples became transparent. Analysis of the microstructural features of the pressure-induced transparent samples indicated that the compression caused the grains to fracture, and the broken grains bonded with each other. We demonstrated that the ceramics’ pressure-induced transparency was a process during which the grains were squeezed and broken, the pores were close between the grains, and the broken grains were re-bonded under compression.     

Large domain-wall currents in epitaxial Au/BiFeO3/SrRuO3 thin-film capacitors with modulated oxygen vacancy and wall densities

Large domain wall (DW) conductivity in an insulating ferroelectric plays an important role in the future nanosensors and nonvolatile memories. However, the wall current was usually too small to drive high-speed memory circuits and other agile nanodevices requiring high output-powers. Here, a large domain-wall current of 67.8 μA in a high on/off ratio of ~4460 was observed in an epitaxial Au/BiFeO₃/SrRuO₃ thin-film capacitor with the minimized oxygen vacancy concentration. The studies from read current-write voltage hysteresis loops and piezo-response force microscope images consistently showed remaining of partially unswitched domains after application of an opposite poling voltage that increased domain wall density and wall current greatly. A theoretical model was proposed to explain the large wall current. According to this model, the domain reversal occurs with the appearance of head-to-head and tail-to-tail 180° domain walls (DWs), resulting in the formation of highly conductive wall paths. As the applied voltage increased, the domain-wall number increased to enhance the on-state current, in agreement with the measurements of current-voltage curves. This work paves a way to modulate DW currents within epitaxial Au/BiFeO₃/SrRuO₃ thin-film capacitors through the optimization of both oxygen vacancy and domain wall densities to achieve large output powers of modern domain-wall nanodevices.     

结冰风洞校准标准研究

本文按结冰风洞制冷方式、试验对象、用途性质和试验段尺寸归纳总结了结冰风洞的类型,指出校准标准主要针对的结冰风洞类型;阐述结冰风洞空气动力流场校准可以依据的3个国内外标准;介绍SAE结冰风洞校准标准中云雾场校准的主要内容;分析研究相关标准的特点和存在的不足;提出未来我国制定结冰风洞校准标准的建议。     

Fabrication of Cu/graphite film/Cu sandwich composites with ultrahigh thermal conductivity for thermal management applications

Effective thermal management of electronic integrated devices with high powder density has become a serious issue, which requires materials with high thermal conductivity (TC). In order to solve the problem of weak bonding between graphite and Cu, a novel Cu/graphite film/Cu sandwich composite (Cu/GF/Cu composite) with ultrahigh TC was fabricated by electro-deposition. The micro-riveting structure was introduced to enhance the bonding strength between graphite film and deposited Cu layers by preparing a rectangular array of micro-holes on the graphite film before electro-deposition. TC and mechanical properties of the composites with different graphite volume fractions and current densities were investigated. The results showed that the TC enhancement generated by the micro-riveting structure for Cu/GF/Cu composites at low graphite content was more effective than that at high graphite content, and the strong texture orientation of deposited Cu resulted in high TC. Under the optimizing preparing condition, the highest in-plane TC reached 824.3 W·m⁻¹·K⁻¹, while the ultimate tensile strength of this composite was about four times higher than that of the graphite film.     

LTE系统多小区上行联合功控算法

针对传统的小区内开环功率控制算法通常以提升本小区的吞吐量性能为目标，忽略了当前小区用户对邻小区用户同频干扰的问题，为提升边缘用户性能的同时兼顾系统整体性能，提出了一种LTE系统小区间上行联合功率控制（UJPC）算法。该算法采用单基站三扇区为系统模型，以最优化系统吞吐量比例公平函数为目标，首先根据最小信干噪比（SINR）约束值和用户最大发射功率这两个约束条件得到相应的数学优化模型，然后采用连续凸近似的方法求解优化问题得出各个基站所管辖的小区内所有用户的最优发射功率。仿真结果表明，与基准的开环功控方案相比，联合功控方案在保证系统平均频谱利用率的情况下能够较大幅度地提高小区边缘频谱利用率，其最佳性能增益能达到50%。     

Microenvironment and related genes predict outcomes of patients with cervical cancer: evidence from TCGA and bioinformatic analysis

Cervical cancer (CESC) is one of the most common cancers and affects the female genital tract. Consistent HPV infection status has been determined to be a vital cause of tumorigenesis. HPV infection may induce changes to the immune system and limit the host’s immune response. Immunotherapy is therefore essential to improving the overall survival of both locally advanced and recurrent CESC patients. Using 304 relevant samples from TCGA, we assessed immune cell function in CESC patients to better understand the status of both tumor micro-environment cells and immune cells in CESC. Functional enrichment analysis, pathway enrichment analysis, and PPI network construction were performed to explore the differentially expressed genes (DEGs). The analysis identified 425 DEGs, which included 295 up-regulated genes and 130 down-regulated genes. We established that upregulation of CCL5 was correlated with significantly better survival, meaning that CCL5 expression could serve as a novel prognostic biomarker for CESC patients. We further focused on CCL5 as a hub gene in CESC, as it had significant correlations with increased numbers of several types of immune cells. Cell-type fractions of M1 macrophages were significantly higher in the high-immune-scores group, which was associated with better overall survival. Finally, we concluded that CCL5 is a promising prognostic biomarker for CESC, as well as a novel chemotherapeutic target.     

多组分智能精细混开棉机组在纤维混纺中的应用

基于差别化纤维混纺纱对纤维的混合要求非常高,介绍了一种混棉设备多组分智能精细混开棉机组在差别化纤维混纺上的应用及其使用方法。所述多组分智能精细混开棉机组包括JWF1081型称重给棉机、JWF1035型混合输送机、JWF1127型精细开松机及手动喂入装置。经实际应用证明:该多组分智能精细混开棉机组物料的混合方式合理、自动化程度高,减少了工人劳动强度,降低了生产及管理成本,提高了生产效率。     

关于牙膏纸箱堆码压力与整体蠕变变形可靠性研究

通过牙膏纸箱堆码整体蠕变的实验数据，利用可靠性理论，统计出在一定堆码层数下，最底层牙膏纸箱所受的堆码压力与纸箱整体蠕变变形之间的可靠性关系。     

BOC调制技术研究

伽利略卫星导航系统是欧洲自主的、独立的全球多模式卫星定位导航系统，提供高精度、高可靠性的定位服务，同时它实现完全非军方控制、管理。伽利略系统采用BOC调制方式。现介绍BOC调制的性质及和BPSK调制方式相比较的优点。     

忠武输气管道悬索跨越设计创新及探讨

忠武输气管道有4次悬索跨越,分别是蚂蝗溪悬索跨越、木龙河悬索跨越、马水河悬索跨越、野三河悬索跨越。文章介绍了这几座悬索跨越管桥设计中采用的多项新技术,如采用热聚乙烯半平行钢丝索代替以往的钢丝绳;采用钢管塔架代替以往的角钢塔架;根据地形地貌特点变换风索型式或取消塔架等。这些新技术、新设计在工程中均取得了良好的效果。另外,文章还针对悬索跨越桥面结构型式、预拱度设置、不对称荷载的影响、风索基础的设置等问题进行了探讨。