排序方式: 共有16条查询结果,搜索用时 31 毫秒
1.
建筑热水管道系统是在环状管网条件下运行,其主管流量受环参数的影响,在原枝状管系条件下得到的设计流量值基础上重新分配。经分析发现,将热水的接入点和回水接出点分设在管系的两端,是最佳的管系图式。此时,最不利供水立管已不在系统的敢远端,而是位于管系中部的立管。随着立管数量的增加,管系各立管配水流量的不均匀性也急剧增大,其相应的系统运行调试工作可参考本文中“热水立管局部阻力系数加载参考表”所提供的数据,将 相似文献
2.
研究了热处理条件对不同方法制备的Ag-30Pd粉末的相结构与形貌的影响。结果表明,采用水合肼还原制备的Ag-30Pd共沉淀粉末,在335℃下经过油酸或氮气介质中液相或固相热处理后,粉末均朝合金化结构转变;采用抗坏血酸还原制备出的银钯合金粉初始为团聚颗粒,经400~450℃氮气气氛下热处理后,颗粒发生烧结而变得密实,结晶性提高;总体上,银钯共沉淀粉在335℃,合金粉在450℃的氮气保护下保温处理4 h后,粉末致密,粒径为1~3μm,可更好地满足银钯浆料的使用要求。 相似文献
3.
4.
5.
分别采用Tersoff势与S-W势对不同温度下Si(100)面重构情况进行分子动力学模拟,找出了这两种势函数下发生重构的温度范围,进而采用S-W势对几种典型情况进行模拟研究.结果发现,二聚体形成前后的温度、内能会出现明显变化,高温时重构速度快但效果较差且不稳定,会形成吸附单体.原子间距为0.33nm左右是二聚体形成的关键距离. 相似文献
6.
7.
8.
建筑热水管道系统是在环状管网条件下运行,其立管流量受环参数的影响,在原枝状管系条件下得到的设计流量值基础上重新分配。经分析发现,将热水的接入点和回水接出点分设在管系的两端,是最佳的管系图式。此时.最不利供水立管已不在系统的最远端.而是位于管系中部的立管.随着立管数量的增加,管系各立管配水流量的不均匀性也急剧增大,其相应的系统运行调试工作可参考本文中“热水立管局部阻力系数加载参考表”所提供的数据.将管系中部的主管作为基准来进行。 相似文献
9.
The properties of Al-doped ZnO (AZO) play an important role in the photovoltaic performance of inverted polymer solar cells (PSCs), which is used as electron transport and hole blocking buffer layers. In this work, we study the effects of Al-doping level in AZO on device performance in detail. Results indicate that the device performance intensely depends on the Al-doping level. The AZO thin films with Al-doping atomic percentage of 1.0% possess the best conductivity. The resulting solar cells show the enhanced short current density and the fill factor (FF) simultaneously, and the power conversion efficiency (PCE) is improved by 74%, which are attributed to the reduced carrier recombination and the optimized charge transport and extraction between AZO and the active layer. 相似文献
10.