Processing of Yttria-Alumina Coated Silicon Nitride Slips by Slip Casting

Si₃N₄powders coated with 6 wt% Y₂O₃and 4 wt% Al₂O₃were prepared by coprecipitation. The resulting powders were dispersed in water at different pH values and with addition of various amounts of ammonium polyacrylate (NH₄PA) to produce 32 vol% slips. The influence of the amount of NH₄PA solution added and pH on the rheological properties of 32 vol% coated Si₃N₄slips were studied. In addition, the sintered density of cast samples was determined and related to the degree of slip dispersion. The adsorption of the NH₄PA on the coated particle surface was rather high and the surface became saturated near 0.86 mg/m²at pH 9.2. High NH₄PA concentrations (1.7–3 wt%) were necessary to obtain well dispersed 32 vol% coated Si₃N₄slips at pH 9.2. The best stabilization was obtained with the addition of 2.3 wt% NH₄PA; in this condition, the viscosity reached a minimum value of 35 mPa.s at 100 s^–1. The slip viscosity increased with increasing pH from 9.2 to 10.2. Slips with low viscosities gave a more dense packing of cast samples and consequently higher sintered density values.     

Oculomotor paralysis. The perspective of a neuro-ophthalmology consultation

Ocular paresis is a usual diagnosis in neuro-ophthalmologic consultation, and its aetiology is indeed a challenge. The authors studied 3400 records concerning this consultation, between 1982 and the third quarter of 1993. During this period 221 cases with ocular paresis were selected. During this retrospective study we point out the following items: the cranial nerve affected; the neuro-ophthalmologic semiology; the aetiology and clinical evolution, according to the age groups. From 221 cases selected, 111 were paresis from the VIth pair (50.2%), 88 from the IIIrd pair (39.8%), 14 multiple paresis (6.4%) and 8 paresis from the IVth pair (3.6%). The most frequent complaint was diplopia (> 90%). As far as the aetiological diagnosis is concerned, this was easier to establish in patients > 50 years of age. In this age group the most usual aetiology was vascular and traumatic pathologies. In younger patients the most frequent pathologies were traumatic and tumoral. The prognostic was better in the vascular group, the paresis recovery being > 50% in all other pathologies, except the tumoral one.     

The bone marrow in murine AIDS

In order to increase the understanding of blood cytopenias in HIV infection we have investigated the bone marrow in murine AIDS. C57BL/6 mice infected with the LP-BM5 retrovirus show a decrease in cellularity, numerous haemophagocytic histiocytes, a reduction of all erythroid precursor cells, an increase in eosinophil number and an increase in lymphocytes. Immunostaining with an anti-Pr60gag antibody shows that the majority of bone marrow cells express the viral protein. Thus, the bone marrow in MAIDS has many similarities with the bone marrow from patients with advanced AIDS and may prove useful as a model for therapy aimed at treating blood cytopenias.     

Application of Romero García method to the degradation process of DGEBA/ETDA filled with ultra fine metallic copper

Summary The thermal properties of an epoxy resin (diglycidyl ether Bisphenol A, DGEBA) cured with a primary amine (ethylenediamine, ETDA) and filled with 10, 20 and 30 wt. % of ultra fine copper particles were analyzed. The thermal results were evaluated by means of the Romero-Garcia method, which allowed to obtain the resin degradation kinetic parameters, as well as the possible decomposition mechanism. From the obtained results is possible to infer that higger copper content strongly affects the degradation process of the epoxy resin, which causes a drop off on the composites thermal stability. This behavior could be attributed to water presence, being this effect less pronounced for the resin with 10 wt. % copper and unfilled resin. Regarding to decomposition mechanism, three way transport showed the best correlation for all samples.     

Aqueous tape casting of yttria stabilized zirconia

Tape casting process was used to produce yttria stabilized zirconia (YSZ) substrates in an aqueous system with poly(vinylalcohol) (PVA) and glycerine as binder and plasticizer, respectively. Various compositions of YSZ slips with different amounts of PVA and glycerine and consequently different solid/liquid ratios were prepared. The influence of the slip composition on the rheological properties of the slips was studied. In addition, the effect of the slip composition on the properties of the green and sintered tapes was investigated. PVA and glycerine did not affect the dispersion properties of the YSZ powder. Glycerine additions enhanced the flexibility of the green tapes but also produced a decrease in the tensile strength. The increase in the PVA content increased the tensile strength but resulted in a markedly decrease in the green density of the tapes. A correlation between the green and sintered density was found. The anisotropic sintering shrinkage parallel and perpendicular to the casting direction increased with increasing the PVA content. The slip compositions with 5 wt% PVA produced green tapes with satisfactory tensile strength. They had the highest sintered density, the lower sintering shrinkage and the lesser shrinkage anisotropy.     

EGF/EGF-R system and benign breast disease during and following the treatment of gynaecological pathologies with an analogue of LH-RH

Clinical and pathological changes of the mammary gland have been studied in 64 women affected by symptomatic Benign Breast Disease (BBD) coexisting with endometriosis or uterine leiomyomata. These patients were rendered hypoestrogenic by subcutaneous administration of the LH-RH analogue Goserelin depot [D-ser (tBu)6 Aza-Gly10-GnRH (ICI118630)] performed every 28 days, for six months. They were evaluated clinically and ultrasonographically before and after treatment to find possible changes of BBD as well as of endometriosis or uterine leiomyomata. Mammary biopsies were performed before and after treatment in all the patients to study the changes of EGF-R expression. Results showed that clinical improvement is accompanied with a reduction of EGF-R expression.     

Hormonal profile during the follicular phase in cycles stimulated with a combination of human menopausal gonadotrophin and gonadotrophin-releasing hormone antagonist (Cetrorelix)

A third generation gonadotrophin-releasing hormone antagonist (Cetrorelix) was used during ovarian stimulation in 32 patients undergoing assisted reproduction, in order to prevent the premature luteinizing hormone (LH) surge. In all patients, ovarian stimulation was carried out with two or three ampoules of human menopausal gonadotrophin (HMG), starting on day 2 of the menstrual cycle. In addition, 0.5 mg of Cetrorelix was administered daily from day 6 of HMG treatment until the day of ovulation induction by human chorionic gonadotrophin (HCG). A significant drop in plasma LH concentration was observed within a few hours of the first administration of Cetrorelix (P < 0.005). Moreover, no LH surge was detected at any point in the treatment period in any of the 32 patients. A mean oestradiol concentration of 2111 +/- 935 ng/l was observed on the day of the HCG administration, indicating normal folliculogenesis. Like LH, progesterone concentration also dropped within a few hours of the first administration of Cetrorelix (P < 0.005). A 0.5 mg daily dose of Cetrorelix prevented a premature LH surge in all the 32 patients treated.     

English teaching in the Italian medical faculties: results of a survey

BACKGROUND: Although a compulsory examination in medical English has been present in the medical degree curriculum in Italy since 1990, guidelines indicating what should be learnt and suggesting some means of overcoming the various problems this entails are still lacking. OBJECTIVE: To investigate the main features of teaching English in the Medical Faculties and enquire into how the various problems are solved in the individual English teaching units. METHOD: A questionnaire addressing the above issues was sent out to all the Italian Universities with a Medical Faculty. RESULTS: The first finding of our survey was that response was very poor: less than 30% of the survey volunteered any reply. Within the very reduced sample which responded, there was a high degree of variation among the solutions adopted, although the underlying problems were perceived to be much the same throughout Italy. CONCLUSIONS: The general objective of the English course for medicine should be more precisely defined, together with a series of specific minimum skills the student should possess to pass the final examination. A closer collaboration among the English teaching units might help to standardize these requirements, improve the quality of the teaching and hence the level of proficiency in English for the specific purpose of medical practice.     

Production and characterization of Si-N films obtained by r.f. magnetron sputtering

Si-N films were deposited by sputtering from an Si₃N₄ target with different deposition pressures and negative substrate bias. The films were amorphous and showed a “featureless” morphology. A high oxygen content was detected in unbiased films. For these films the Si/N ratio was very high compared with the target composition, whereas for biased films the opposite was observed. Si-N films presented cohesive failures for loads as high as 21 N and adhesive failure at 45 N when they were analysed by scratch test. Very high hardness (45 GPa) was obtained, particularly for biased films. Unbiased films were softer, which is attributed to the formation of silicon oxide and/or to a lower compressive stress level.     

The influence of erbium doping of Al-N sputtered coatings on their optical properties

Room-temperature photoluminescence (PL) measurements were performed on erbium-doped AlN thin films deposited by r.f. reactive magnetron sputtering on steel and amorphous quartz substrates. The Al/(N+Al) ratio in the as-deposited films varies in the range from 0.48 to 0.51, while erbium content ranges from 0.2 to 3.5 at.%. X-ray diffraction showed that the AlN(Er) films with erbium contents up to 1.4 at.% have the hexagonal AlN crystalline structure and a preferential orientation following the [0 0 1] direction. However, as a consequence of lattice distortion and/or defect generation originated by the incorporation of erbium atoms in the AlN structure, the films became amorphous for higher erbium contents. All the as-deposited films exhibited room-temperature PL at 1.54 μm, indicating that at least part of the erbium species are optically active in the as-grown samples. Subsequent annealing of the films led to an intensification of the PL signal up to a factor of 6 for the films heat-treated at 1075 K. Within the range of chemical compositions studied in this work, the PL signal increased with increasing erbium content. A weak green visible PL was also detected for the samples doped with the highest erbium contents when annealed at high temperatures.