Spin probe study of semi‐interpenetrating polymer networks based on polyurethane and polymethacrylate functional prepolymers

The motional transition and heterogeneity of semi‐interpenetrating networks (SIPNs) based on polyurethane (PU) with carboxylic groups and methacrylic copolymer (PM) with tertiary amine groups were studied by the electron spin resonance (ESR) spin probe method. The concentration of functional groups in both prepolymers varied from 0 to 0.45 mmol g^?1. Spin‐probed SIPNs show that the temperature‐dependent spectra are sensitive to polymer interactions imposed by functional groups. These interactions determine the free volume distribution in the matrix and temperature at which motional transition takes place. The fraction of free volume increases with functional group concentration and reaches its maximum at 0.25 mmol g^?1. Further increases in the functional group concentration reduce the free volume. The results of the networks with strong interactions are discussed in terms of the interference of the plasticizing effect of the PU component and the formation of possible cluster cross‐links, which restricts segmental motions. Copyright © 2003 Society of Chemical Industry     

Origin of the threshold voltage instability in SiO/sub 2//HfO/sub 2/ dual layer gate dielectrics

The magnitude of the V/sub T/ instability in conventional MOSFETs and MOS capacitors with SiO/sub 2//HfO/sub 2/ dual-layer gate dielectrics is shown to depend strongly on the details of the measurement sequence used. By applying time-resolved measurements (capacitance-time traces and charge-pumping measurements), it is demonstrated that this behavior is caused by the fast charging and discharging of preexisting defects near the SiO/sub 2//HfO/sub 2/ interface and in the bulk of the HfO/sub 2/ layer. Based on these results, a simple defect model is proposed that can explain the complex behavior of the V/sub T/ instability in terms of structural defects as follows. 1) A defect band in the HfO/sub 2/ layer is located in energy above the Si conduction band edge. 2) The defect band shifts rapidly in energy with respect to the Fermi level in the Si substrate as the gate bias is varied. 3) The rapid energy shifts allows for efficient charging and discharging of the defects near the SiO/sub 2//HfO/sub 2/ interface by tunneling.     

On the critical molecular chain length of polydimethylsiloxane

Because a study of the results reported for the chain dimensions of polydimethylsiloxane (PDMS), critical for the onset of this polymer's non-Newtonian flow behavior, obtained from the viscosity-molecular weight relationships available from the literature, clearly revealed that considerable differences exist between the reported data, a detailed analysis of these data was performed together with an additional examination of 10 new PDMS samples that were selected so as to have molecular weights that would fill the gaps observed in the polymer viscosity–chain length relationship constructed from the accepted literature data. The results obtained were analyzed by using several different procedures integrated into a recently described comparative method that could allow for determination of what is called the most realistic critical value, Z_wc. The latter was determined as 930 PDMS main-chain atoms, which corresponds to this polymer's degree of polymerization of 464.5 and the weight-average molecular weight of 34,500. It is not only shown that after elimination of some clearly erroneous data points from the previously reported relationships the obtained critical chain-length values could very well fit the earlier relationships, but also that appropriate “master” relationships were constructed including 48 pairs of the old and 10 pairs of the new data points. It is suggested that this relationship be accepted as the best-fit viscosity–polymer chain-length dependence for PDMS, and it is pointed out that the obtained PDMS critical chain-length value ranks this polymer's macromolecules as the most flexible of the corresponding long-chain molecules presently known. © 1993 John Wiley & Sons, Inc.     

The impact of MAC parameters on the performance of 802.15.4 PAN

The operation of a personal area network, operating under the IEEE Standard 802.15.4 in the beacon enabled mode, is analyzed using the theory of discrete time Markov chains and M/G/1/K queues. The model includes the impact of different parameters such as packet arrival rate, number of stations, station’s buffer size, packet size, and inactive period between the beacons. We have derived several important performance parameters such as probability of access, probability that medium is idle, queue length distribution in the device, and probability distribution of the packet service time. Some important conclusions regarding the implementation of 802.15.4 networks and compatible network devices are outlined.     

An adaptive multirate algorithm for acquisition of fluorescence microscopy data sets.

We propose an algorithm for adaptive efficient acquisition of fluorescence microscopy data sets using a multirate (MR) approach. We simulate acquisition as part of a larger system for protein classification based on their subcellular location patterns and, thus, strive to maintain the achieved level of classification accuracy as much as possible. This problem is similar to image compression but unique due to additional restrictions, namely causality; we have access only to the information scanned up to that point. While we do want to acquire fewer samples with as low distortion as possible to achieve compression, our goal is to do so while affecting the overall classification accuracy as little as possible. We achieve this by using an adaptive MR scanning scheme which samples the regions of the image area that hold the most pertinent information. Our results show that we can achieve significant compression which we can then use to aquire faster or to increase space resolution of our data set, all while minimally affecting the classification accuracy of the entire system.     

Superconductor integrated circuit fabrication technology

Today's superconductor integrated circuit processes are capable of fabricating large digital logic chips with more than 10 K gates/cm/sup 2/. Recent advances in process technology have come from a variety of industrial foundries and university research efforts. These advances in processing have reduced critical current spreads and increased circuit speed, density, and yield. On-chip clock speeds of 60 GHz for complex digital logic and 750 GHz for a static divider (toggle flip-flop) have been demonstrated. Large digital logic circuits, with Josephson junction counts greater than 60 k, have also been fabricated using advanced foundry processes. Circuit yield is limited by defect density, not by parameter spreads. The present level of integration is limited largely by wiring and interconnect density and not by junction density. The addition of more wiring layers is key to the future development of this technology. We describe the process technologies and fabrication methodologies for digital superconductor integrated circuits and discuss the key developments required for the next generation of 100-GHz logic circuits.     

Outage performance of dual‐hop relaying systems over extended generalized‐K fading channels

The outage performance of the amplify‐and‐forward relaying strategies over mutually uncorrelated extended generalized‐K fading channels is addressed in this paper. The attention is dedicated to the analyses of the noise‐limited and also interference‐limited environment. The new analytical expression for outage probability of observed relaying system in the presence of thermal noise is derived using the method for approximating equivalent signal‐to‐noise ratio. In addition, the outage performance is studied for the dual‐hop system when only the single dominant co‐channel interference is inherent at the relay and destination node. The correctness of the proposed mathematical derivations is verified by simulations. Copyright © 2014 John Wiley & Sons, Ltd.     

POLYCYCLIC AROMATIC HYDROCARBONS IN PRODUCTS OF A BEET SUGAR FACTORY IN VOJVODINA: LEVELS AND INTAKES

The levels of 16 EPA polycyclic aromatic hydrocarbons (PAHs) were investigated in samples of sugar beets and their products representative for a beet sugar factory located in the central part of Vojvodina, the main agricultural region in Serbia. The sum of the detected PAHs ranged from 51 pg g ^?1 ww for molasses to 391 pg g ^?1 ww for dried sugar beet pulp. The concentration of benzo(a)pyrene (BaP) for all sample types was about or less than 100 pg g ^?1 ww, which is far less than the existing Serbian and EU tolerances set for some foodstuffs. The Serbian intake of BaP via total sugar consumption that ranged from 70–85 g per capita day ^?1 , was assessed to be from 0.029 to 0.035 ng kg ^?1 b.w. day ^?1 . Furthermore, the toxic equivalency factor (TEF) approach was used to estimate the carcinogenicity of PAH mixture found in analyzed samples.