Pharmacological distribution diagrams: a tool for de novo drug design

BACKGROUND: There is no empirical data available on attitudes concerning AIDS and habits towards HIV infected patients of physicians in general or private practice. In this study results of a self-evaluation are presented. METHODS: 178 physicians working with out-patients in different medical fields were randomly selected for a cross sectional study and interviewed using a standardised questionnaire. RESULTS: 89% think that they are sufficiently informed about AIDS (in the USA 20%). They regarded the risk of infection to be lower than the Anglo-American physicians. They believed there is a lack of interchange of information between colleagues regarding the degree of infectiousness of referred patients. A third of the physicians fear that other patients will go elsewhere if they find out that their physician is treating AIDS patients. 54% would hold special clinic sessions for HIV-patients outside the normal schedule for practice times. 89% believed that HIV patients were partly to blame for their illness. CONCLUSIONS: Although the physicians recognise the problem of HIV-infection, they partly deny the real necessities and facts. A reason for this could be the emotions underlying the general attitude to everything pertaining to HIV-disease. Attitudes to HIV-disease and the dealing with it in daily practice must be considered on the basis of individual emotional motives.     

Fluctuation conductivity in Li-doped YBa2Cu3O7−x

The paraconductivity of Li-doped YBa₂Cu₃O_7?x was measured. We have found that the character of the fluctuation changes as lithium content increases: instead of a crossover from 2D to 3D behavior (D is the dimensionality), as we have observed for a low doping level, a double crossover to the 2D percolative and 3D percolative regimes becomes manifest by increasing the lithium content.     

Thermal Analysis of Sulphamethoxazole - Sugar Physical Mixes

Differential scanning calorimetry and hot stage microscopy have been used to study the interactions between sulphamethoxazole and the sugars maltose, glucose, sucrose and mannitol. Only the sulphamethoxazole-mannitol system appeared to be stable and presented a eutectic containing 90.3% sulphamethoxazole. Heats of fusion for sulphamethoxazole, mannitol and their eutectic were 33.4, 73.6 and 39.9 cal g respectively.     

On the dissipation process in Bi2Sr2Ca2Cu3O10 tapes and bulk samples with preferential grain orientation in zero external magnetic field

Current-voltage characteristics of Bi₂Sr₂Ca₂Cu₃O₁₀ tapes and bulk samples with preferentially oriented crystallites have been measured in zero applied magnetic field and for temperatures close to the mean-field critical-temperature,T _c0. It was shown that the power-law dependence,V=AI ^a, valid for two-dimensional systems, does not correctly describe the data, which clearly indicate the existence of a finite critical-current density,J _c. The experimentalI-V curves are fitted quite well with the model which attributes the finite critical-current density to the coupling between the CuO₂ double layers. It was found thatJ _c vanishes at a temperature value belowT _c0. This behavior can result from the occurrence of vortex fluctuation-induced layer decoupling and/or from the contribution of entropy to the vortex unbinding process.     

Is there a role for continuation phase cognitive therapy for depressed outpatients?

Two pilot studies evaluated the rate of relapse or recurrence (i.e., major depressive disorder) after cognitive therapy (CT). Two sequential cohorts included outpatients who responded to acute phase CT (A-CT) and who agreed to monthly, treatment-free follow-up. In Study 1, the Kaplan-Meier technique estimated relapse and recurrence rates of 40% at 6 months, 45% at 8 months, 50% at 12 months, 67% at 18 months, and 74% at 24 months. In Study 2, responders to A-CT received 8 months (10 sessions) of continuation phase CT (C-CT). In Study 2, relapse or recurrence was 20% at 6 and 8 months, 27% at 12 months, and 36% at 18 and 24 months after A-CT. An exploratory log-rank test showed that relapse or recurrence-free survival was greater in Study 2 than in Study 1. If replicated, this result suggests that C-CT can reduce depressive relapse or recurrence. Alternative explanations are presented. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A new approach to predict ulcerative colitis activity through standard clinical–biological parameters using a robust neural network model

Neural Computing and Applications - Colonoscopy is the “gold” standard for evaluating disease activity in ulcerative colitis (UC). An important area of research is finding a...     

Microfluidic motion for a direct investigation of solvent interactions with PDMS microchannels

Solid surface/liquid interactions play an important role in microfluidics and particularly in manipulation of films, drops and bubbles, a basic requirement for a number of lab-on-chip applications. The behavior of solvents in coated microchannels is difficult to be predicted considering theories; therefore, experimental methods able to estimate the properties at the interface in real time and during the operational regime are amenable. Here, we propose to use an experimental setup to evaluate the effective dynamics of solvents inside PDMS microchannels. The influence of the solvent properties as well as of the channel wall’s wettability on the fluid movements was evaluated. Modification of the channel properties was achieved by introducing Teflon coatings that allow producing stable hydrophobic microchannel walls. The results were fitted according to Washburn-type power-law and compared with theoretical calculations of the parameter β that expresses the dependence of capillary dynamics on surface tension γ, liquid viscosity η, contact angles θ and the hydraulic radius R _H. A comparison between the calculated and the experimental values reveled that parameters other than the contemplated ones influenced the measurements. The main parameter that affects the flow of solvents such as water, methanol ethanol, dimethylformamide, acetonitrile and acetone was found to be the γ/η ratio. Considering these results, the investigation tool described here is believed to be promising to predict the dynamics of common organic solvents inside integrated functional fluidic devices and to accurately control solvent flow, particularly in capillary-driven pumpless systems, a basic requirement for widening the application range of PDMS lab-on-chip devices.     

Resistant starch formation during baking -effect of baking time and temperature and variations in the recipe

Summary The dietary fibre content in white wheat bread, measured with an enzymatic, gravimetric method, was almost 20% higher than in the corresponding flour. The increment was largely explained by the formation of resistant starch, i.e. starch available to amyloglucosidase only after solubilization with 2m-KOH. The resistant starch was formed in the oven or upon cooling of the finished bread. The water content in the dough seemed to influence the extent of the resistant starch formation, whereas changes in the fat content had no effect. The results indicate that the resistant starch might be hard retrograded starch, possibly amylose.

---

Bildung von resistenter Stärke während des Backens in Abhängigkeit von Backzeit, Backtemperatur und Rezeptvariationen

Zusammenfassung Die Menge an Ballaststoffen, die nach einer enzymatisch-gravimetrischen Methode bestimmt wurde, war in weißem Weizenbrot fast 20% höher als in dem entsprechendem Mehl. Die Erhöhung konnte zum großen Teil auf die Bildung von resistenter Stärke zurückgeführt werden, d. h. auf eine Stärkefraktion, die nur nach Auflösung mit 2m-KOH für Amyloglucosidase zugänglich ist. Die resistente Stärke wird während des Backens oder während der Abkühlung des Brotes gebildet, und die Menge scheint vom Wassergehalt des Teiges, aber nicht vom Fettgehalt abhängig zu sein. Die Resultate dieser Untersuchung weisen darauf hin, daß die resistente Stärke retrogradierte Stärke, möglicherweise Amylose, ist.

     

Novel (Phenothiazinyl)Vinyl-Pyridinium Dyes and Their Potential Applications as Cellular Staining Agents

We report here the synthesis and structural characterization of novel cationic (phenothiazinyl)vinyl-pyridinium (PVP) dyes, together with optical (absorption/emission) properties and their potential applicability as fluorescent labels. Convective heating, ultrasound irradiation and mechanochemical synthesis were considered as alternative synthetic methodologies proficient for overcoming drawbacks such as long reaction time, nonsatisfactory yields or solvent requirements in the synthesis of novel dye (E)-1-(3-chloropropyl)-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium bromide 3d and its N-alkyl-2-methylpyridinium precursor 1c. The trans geometry of the newly synthesized (E)-4-(2-(7-bromo-10-ethyl-10H-phenothiazin-3-yl)vinyl)-1-methylpyridin-1-ium iodide 3b and (E)-1-methyl-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium tetrafluoroborate 3a′ was confirmed by single crystal X-ray diffraction. A negative solvatochromism of the dyes in polar solvents was highlighted by UV-Vis spectroscopy and explanatory insights were supported by molecular modeling which suggested a better stabilization of the lowest unoccupied molecular orbitals (LUMO). The photostability of the dye 3b was investigated by irradiation at 365 nm in different solvents, while the steady-state and time-resolved fluorescence properties of dye 3b and 3a′ in solid state were evaluated under one-photon excitation at 485 nm. The in vitro cytotoxicity of the new PVP dyes on B16-F10 melanoma cells was evaluated by WST-1 assay, while their intracellular localization was assessed by epi-fluorescence conventional microscopy imaging as well as one- and two-photon excited confocal fluorescence lifetime imaging microscopy (FLIM). PVP dyes displayed low cytotoxicity, good internalization inside melanoma cells and intense fluorescence emission inside the B16-F10 murine melanoma cells, making them suitable staining agents for imaging applications.     

New high-temperature copper alloys

New high-strength, high-temperature Cu-Ni-Si alloys have been developed using additions of Cr, Zr, and/or Ti. These new alloys remain as precipitation hardenable as the base alloy, but the main strengthening phase may be different than Ni₂Si (e.g., Cr₂Ti). Substantial increases in mechanical strength were observed at both room and high temperature (773 K) when additions of Cr+Zr+Ti and Cr+Zr were made. Industrial testing of these alloys indicated a sevenfold increase in the lifetime of lateral blocks in continuous casting equipment of copper alloys.