A charge sharing–based switching scheme for SAR ADCs

This paper presents an energy-efficient switching scheme for successive approximation register (SAR) analogue-to-digital converter (ADC). The proposed scheme employs charge recycling method to keep the capacitor arrays free of transitional energy between bit generations except reset phase. In comparison with the conventional switching scheme, the proposed one achieves 100% transitional energy saving without considering reset phase. In addition, configuration of a 10-bit SAR ADC shows that the proposed switching scheme reduces the capacitor area by 25% compared with the conventional switching scheme.     

Adaptive joint subband vector quantisation codec for handheld videophone applications

A new wavelet-based video codec is presented, which joins vectors in the same subbands of different frames in a frame group and uses the properties of the human visual system. Perceptual weights are designed and used in the vector selection and quantisation of the wavelet coefficients. Results indicate a significant improvement in frame quality compared to JPEG2000 image sequence coder.     

Simulation of Natural Depletion and Miscible Gas Injection Effects on Asphaltene Stability in Petroleum Reservoir Fluids

Natural depletion of petroleum reservoirs as well as gas injection for enhance oil recovery, are unavoidable processes in the oil industry. Foremost, prediction of the problems due to these two processes is very necessary and important. So many field and experimental experiences have shown that heavy organic depositions, especially asphaltene deposition, are principal results during these processes. Results of laboratory simulation of asphaltene deposition during the natural depletion of petroleum reservoirs and also during gas injection and enhanced oil recovery (EOR) processes are reported here. This is achieved through the design of a new experimental setup for the investigation of pressure and composition effects on asphaltene deposition in petroleum fluids at high pressure and high temperature conditions. In this work, asphaltene deposition during decreasing pressure, from pressures greater than reservoir pressure to pressures below the bubble point pressure (natural depletion) and also asphaltene deposition during natural gas injection in reservoir conditions, are studied for three samples—one recombined sample and two bottomhole samples. All of the obtained results from this work conform to theoretical and other experimental works.     

An incentive scheduling mechanism for peer-to-peer video streaming

P2P video streaming networks are found as a scalable solution and an alternative for traditional client–server based video streaming over the Internet. One of the significant issues affecting the success of any P2P streaming network is cooperation between peers. Practical observations have proved the prevalence of free riders in P2P networks that degrade their performance. To solve this problem, using incentive mechanisms, which encourage peers to contribute more in the network, is necessary. In this paper, we designed and proposed a distributed and scalable incentive mechanism for mesh based P2P video streaming networks. In the proposed approach the contribution of the peers is measured and maintained in a distributed fashion. Furthermore, we proposed an incentive sending side scheduler in which peers are served based on their contribution in the network. Our simulation evaluations show the efficiency of the proposed approach in improving the overall perceived video quality by the non-free rider nodes and consequently in the whole network.     

Applications,databases and open computer vision research from drone videos and images: a survey

Analyzing videos and images captured by unmanned aerial vehicles or aerial drones is an emerging application attracting significant attention from researchers in various areas of computer vision. Currently, the major challenge is the development of autonomous operations to complete missions and replace human operators. In this paper, based on the type of analyzing videos and images captured by drones in computer vision, we have reviewed these applications by categorizing them into three groups. The first group is related to remote sensing with challenges such as camera calibration, image matching, and aerial triangulation. The second group is related to drone-autonomous navigation, in which computer vision methods are designed to explore challenges such as flight control, visual localization and mapping, and target tracking and obstacle detection. The third group is dedicated to using images and videos captured by drones in various applications, such as surveillance, agriculture and forestry, animal detection, disaster detection, and face recognition. Since most of the computer vision methods related to the three categories have been designed for real-world conditions, providing real conditions based on drones is impossible. We aim to explore papers that provide a database for these purposes. In the first two groups, some survey papers presented are current. However, the surveys have not been aimed at exploring any databases. This paper presents a complete review of databases in the first two groups and works that used the databases to apply their methods. Vision-based intelligent applications and their databases are explored in the third group, and we discuss open problems and avenues for future research.

     

Ultrasonic-assisted drilling of Inconel 738-LC

Generally in the drilling of modern aviation materials such as nickel and titanium base super alloys, problems frequently occur in terms of burr formation at the cutter exit, tool stress, high heat generation on tool surface as well as low process reliability. A recent and promising method to overcome these technological constraints is the use of ultrasonic assistance, where high-frequency and low-amplitude vibrations are superimposed on the movement of cutting tools. This paper presents the design of an ultrasonically vibrated tool holder and the experimental investigation of ultrasonically assisted drilling of Inconel 738-LC. The circularity, cylindricity, surface roughness and hole oversize of the ultrasonically and conventionally drilled workpieces were measured and compared. The obtained results show that the application of ultrasonic vibration can improve the hole quality considerably. Improvements of up to 60% have been achieved.     

Sustainable Basin-Scale Water Allocation with Hydrologic State-Dependent Multi-Reservoir Operation Rules

This study extends the PSO-MODSIM model, integrating particle swarm optimization (PSO) algorithm and MODISM river basin decision support system (DSS) to determine optimal basin-scale water allocation, in two aspects. The first is deriving hydrologic state-dependent (conditional) operating rules to better account for drought and high-flow periods, and the second is direct, explicit consideration of sustainability criteria in the model’s formulation to have a better efficiency in basin-scale water allocation. Under conditional operating rules, the operational parameters of reservoir target storage levels and their priority rankings were conditioned on the hydrologic state of the system in a priority-based water allocation scheme. The role of conditional operating rules and policies were evaluated by comparing water shortages associated with objective function values under unconditional and conditional operating rules. Optimal basin-scale water allocation was then evaluated by incorporating reliability, vulnerability, reversibility and equity sustainability indices into the PSO objective function. The extended model was applied for water allocation in the Atrak River Basin, Iran. Results indicated improved distribution of water shortages by about 7.5% using conditional operating rules distinguishing dry, normal and wet hydrologic states. Alternative solutions with nearly identical objective function values were found with sustainability indices included in the model.     

Performance Assessment of a Coupled Particle Swarm Optimization and Network Flow Programming Model for Optimum Water Allocation

Water resources allocation problems are mainly categorized in two classes of simulation and optimization. In most cases, optimization problems due to the number of variables, constraints and nonlinear feasible search space are known as a challenging subject in the literature. In this research, by coupling particle swarm optimization (PSO) algorithm and a network flow programming (NFP) based river basin simulation model, a PSO-NFP hybrid structure is constructed for optimum water allocation planning. In the PSO-NFP model, the NFP core roles as the fast inner simulation engine for finding optimum values for a large number of water discharges in the network links (rivers and canals) and nodes (reservoirs and demands) while the heuristic PSO algorithm forms the outer optimization cover to search for the optimum values of reservoirs capacities and their storage priorities. In order to assess the performance of the PSO-NFP model, three hypothetical test problems are defined, and their equivalent nonlinear mathematical programs are developed in LINGO and the results are compared. Finally, the PSO-NFP model is applied in solving a real river basin water allocation problem. Results indicate that the applied method of coupling PSO and NFP has an efficient ability for handling river basin-scale water resources optimization problems.     

A robust optimization approach for pollution routing problem with pickup and delivery under uncertainty

Organizations have recently become interested in applying new approaches to reduce fuel consumptions, aiming at decreasing green house gases emission due to their harmful effects on environment and human health; however, the large difference between practical and theoretical experiments grows the concern about significant changes in the transportation environment, including fuel consumptions, carbon dioxide (CO₂) emissions cost and vehicles velocity, that it encourages researchers to design a near-reality and robust pollution routing problem. This paper addresses a new time window pickup-delivery pollution routing problem (TWPDPRP) to deal with uncertain input data for the first time in the literature. For this purpose, a new mixed integer linear programming (MILP) approach is presented under uncertainty by taking green house emissions into consideration. The objective of the model is to minimize not only the travel distance and number of available vehicles along with the capacity and aggregated route duration restrictions but also the amount of fuel consumptions and green house emissions along with their total costs. Moreover, a robust counterpart of the MILP is introduced by applying the recent robust optimization theory. Computational results for several test problems indicate the capability and suitability of the presented MILP model in saving costs and reducing green house gases concurrently for the TWPDPRP problem. Finally, both deterministic and robust mathematical programming are compared and contrasted by a number of nominal and realizations under these test problems to judge the robustness of the solution achieved by the presented robust optimization model.