一种新型陶瓷材料及其耐磨性

对新型Ａｌ２Ｏ３－ＴｉＣ－Ｃｏ陶瓷的磨粒磨损，冲蚀磨损及其在单颗粒作用下的摩擦磨损行为进行了研究。与ＡＴ３０（７０ｗｔ％Ａｌ２Ｏ３－３０ｗｔ％ＴｉＣ）陶瓷相比，Ａｌ２Ｏ３－ＴｉＣ－Ｃｏ陶瓷具有更为良好的耐磨性，金属钴的存在提高了基体的韧性，细化了晶粒，其综合力学性能得到了显著提高，ＡＴＣ陶瓷样品耐磨性与其强韧化水平和细致的组织结构有关。     

A functional-dependencies-based Bayesian networks learning method and its application in a mobile commerce system.

This paper presents a new method for learning Bayesian networks from functional dependencies (FD) and third normal form (3NF) tables in relational databases. The method sets up a linkage between the theory of relational databases and probabilistic reasoning models, which is interesting and useful especially when data are incomplete and inaccurate. The effectiveness and practicability of the proposed method is demonstrated by its implementation in a mobile commerce system.     

Fischer-Tropsch synthesis on Fe-Mn ultrafine catalysts

The Fischer-Tropsch (FT) synthesis on Fe-Mn ultrafine catalysts prepared by a special degradation method of Fe-Mn complexes is presented. The effects of preparation method and Mn content on the FT performance are examined and the active phases and the role of Mn are elucidated.     

氧化锆增韧陶瓷的相变及相变增韧

本文阐述了氧化锆增韧陶瓷（ＺＴＣ）的相变增韧机理，并探讨了热处理工艺对ＺＴＣ的相变及显微组织的影响规律。     

用相变方法制取高纯度超细钽粉的研究

报导了通过相变热处理使Ｋ２ＴａＦ７晶体参数发生变化，以利于制取高纯度超细钽粉的实验依据和结果。结果表明，Ｋ２ＴａＦ７在２００～２５０℃发生可逆相变；相变后Ｋ２ＴａＦ７晶体的粒径可由原来的１３５１．８μｍ减小至７０．８μｍ，极大地提高了比表面积；相变后，杂质极大挥发，提高了Ｋ２ＴａＦ７的纯度。     

Study of the amination of fatty alcohols catalyzed by Cu−Ni catalysts

Amination of fatty alcohols by hydrogenation and dehydrogenation catalysis is one of the main commercial processes for the production of dimethylalkylamines. The key factor in this process is the preparation of catalysts with high selectivity. A study of amination catalyzed by Cu−Ni catalysts supported on CaCO₃ is reported in this paper. Selectivity of the catalysts was adjustable by varying the ratio of Cu to Ni or by adding a third element (Zn or Mg). The promotion of catalyst selectivity was mainly attributable to the effect of the components on the reducibility of Ni²⁺ in the catalysts. Lower reducibility of Ni²⁻ led to higher catalyst selectivity.     

TWO-STEP MECHANISM IN HETEROGENEOUS CATALYSIS AND DYNAMIC ANALYSIS

Recent development of the dynamic analysis technique has made it possible to measure separately kinetic parameters of a catalytic reaction as well as to study the effect of catalyst preparation parameters. But its application is still limned to first-order reaction. This work is aimed to demonstrate in some detail that,by comparison of the reaction rate expressions with the two-step mechanism used in catalytic kinetics and dynamic analysis, these methods can be extended to non-first-order reaction, and the kinetic parameters measured by dynamic techniques are interpreted for different reaction mechanisms.     

弹性四连杆机构动力学响应的数值求解

针对弹性四连杆机构这一非线性动力学系统,采用直接积分法中的Wilson-θ法对弹性四连杆机构的动力学响应进行求解.同时对其进行了相应的实验研究,通过仿真与实验对比,验证了Wilson-θ法求解非线性动力学模型的可行性.     

四川省水资源可利用量与承载力初探

为了科学合理规划指导水资源的开发利用,根据四川省国民经济发展规划及各行业耗水情况,采用倒算法估算了四川省水资源的可利用量,并分析了各分区的水资源承载能力。从总量上看,四川省水资源可以满足社会经济发展的需求,但由于水资源分布与国民经济产业分布不匹配,部分地区还存在工程性缺水问题。为此,提出了积极建设全省水资源配置骨干网络,加快骨干水利工程建设,加大节水型社会建设力度等措施,以保障四川经济社会可持续发展。     

实用的电子稳像系统设计

由于在车载及机载系统中,受限于质量、体积及功耗等因素,基于PC的电子稳像系统无法直接使用,而基于DSP的系统具有体积小、重量轻、功耗低的特点;这里从硬件与软件两方面设计了一种基于DM642的视频电子稳像系统;给出了系统的输入输出以及数据处理的整体硬件设计,阐述了基于块匹配的稳像算法,并根据设计的硬件与算法搭建Simulink模型,利用Matlab/Simulink软件的实时工具箱RTW创建CCS工程并直接生成C语言代码的方法,调试开发系统的周期;实验结果表明,稳像后的PSNR值明显增大,该系统有效地稳定了频系列;本系统设计简单,稳像精度较好,具有一定的应用价值。