An optimization algorithm based on stochastic sensitivity analysis for noisy objective landscapes

A function minimization algorithm that updates solutions based on approximated derivative information is proposed. The algorithm generates sample points with Gaussian white noise, and approximates derivatives based on stochastic sensitivity analysis. Unlike standard trust region methods which calculate gradients with n or more sample points, where n is the number of variables, the proposed algorithm allows the number of sample points M to be less than n. Furthermore, it ignores small amounts of noise within a trust region. This paper addresses the following two questions: how does the derivative approximation become worse when the number of sample points is small? Can the algorithm find good solutions with inexact derivative information when the objective landscape is noisy? Through intensive numerical experiments using quadratic functions, the algorithm is shown to be able to approximate derivatives when M is about n/10 or more. The experiments using a formulation of the traveling salesman problem show that the algorithm can find reasonably good solutions for noisy objective landscapes with inexact derivatives information.     

Quantitative analysis of organochlorine pesticide residues in Chinese drugs

This paper reports the GC determination of 20 organochlorine pesticides in Chinese drugs Flos Ionicerae and Moluodan etc by the present method of Japan for determinaing pesticide residues. The results suggest that except Folium Isatidis, Radix Codonopsis and Sanqi Pian all accord with the for provisions pesticide residues in Japanese foodstuffs.     

Application of SiC-Si functionally gradient material to thermoelectric energy conversion device

Because of its high–temperature chemical stability, SiC ceramic is a promising material for high-temperature device applications such as thermoelectric energy converters. However, the electrical conductivity of SiC ceramic is too low for it to be used as a thermoelectric energy converter at the cold junction. Therefore, we propose a SiC-Si functionally gradient material (FGM) in order to improve the electrical conductivity of the SiC ceramic at the cold junction. An SiC rod was fired in a temperature gradient furnace. One end of the SiC rod was maintained at 2473 K and the other end was maintained at 1973 K for 30 min. After firing, the porous SiC edge fired at 1973 K was dipped into molten Si in order to infiltrate molten Si into the porous SiC. The microstructure of the FGM is classified into three regions: the SiC-Si composite material; the porous SiC ceramic; and the densified SiC ceramic. The electrical conductivity, the Seebeck coefficient and the thermal conductivity for each region of SiC-Si FGM was measured at 300 K; a figure of merit was calculated. The figure of merit of the SiC-Si FGM at the cold junction, at room temperature, was 10⁸ times higher than that of a nongradient SiC ceramic.     

High performance 35 nm gate length CMOS with NO oxynitride gate dielectric and Ni salicide

The 35 nm gate length CMOS devices with oxynitride gate dielectric and Ni salicide have been fabricated to study the feasibility of higher performance operation. Nitrogen concentration in gate oxynitride was optimized to reduce gate current I/sub g/ and to prevent boron penetration in the pFET. The thermal budget in the middle of the line (MOL) process was reduced enough to realize shallower junction depth in the S/D extension regions and to suppress gate poly-Si depletion. Finally, the current drives of 676 /spl mu/A//spl mu/m in nFET and 272 /spl mu/A//spl mu/m in pFET at V/sub dd/=0.85 V (at I/sub off/=100 nA//spl mu/m) were achieved and they are the best values for 35 nm gate length CMOS reported to date.     

Copolymerization of phenylacetylene with various acetylenes by W- and Mo-based catalysts

In the copolymerization of phenylacetylene with various acetylenes catalysed by WCl₆·Ph₄Sn, the relative reactivity of monomer decreased with increasing steric effect of monomer, e.g. HC  Cn-Bu, HC  Cn-Hex > HC  CPh, HC  Cs-Bu > HC  Ct-Bu, MeCCPh, CICCPh. While 1-chloro-2-phenylacetylene (a disubstituted acetylene) showed high reactivity in the homopolymerization by Mobased catalysts, the reactivity was remarkably depressed in the presence of phenylacetylene as comonomer. Based on these results, the relative reactivity of the acetylenic monomers in copolymerization was explained in terms of competitive coordination of monomers to the propagating end.     

Pulsed Electric Current Sintering of Silicon Nitride

Pulsed electric current sintering (PECS) has been used to densify α-Si₃N₄ powder doped with oxide additives of Y₂O₃ and Al₂O₃. A full density (>99%) was achieved with virtually no transformation to β-phase, resulting in a microstructure with fine equiaxed grains. With further holding at the sintering temperature, the α-to-β phase transformation took place, concurrent with an exaggerated grain growth of a limited number of elongated β-grains in a fine-grained matrix, leading to a distinct bimodal grain size distribution. The average grain size was found to obey a cubic growth law, indicating that the growth is diffusion-controlled. In contrast, the densification by hot pressing was accompanied by a significant degree of the phase transformation, and the subsequent grain growth gave a broad normal size distribution. The apparent activation energy for the phase transformation was as high as 1000 kJ/mol for PECS, almost twice the value for hot pressing (∼500 kJ/mol), thereby causing the retention of α-phase during the densification by PECS.     

Some properties of Sb2Te3−xSex for nonvolatile memory based on phase transition

Composition dependence of properties of Sb₂Te_3–x Se _x in the range 0x<3 were studied using differential thermal analysis and X-ray diffraction. Sb₂Te_3–x Se _x form solid solution for 0<x1.25 and 2.75x<3. A systematic study of crystallization temperature in Sb₂Te_3–x Se _x (0x2.75) thin films prepared by flash evaporation was carried out. In preliminary experiments for some compositions, more than 10³ repetitions between amorphous and crystalline states were attained by the application of electric pulses.