An accurate experimental method for characterizing transmission lines embedded in multilayer printed circuit boards

We have developed an accurate method for measuring the complex propagation constant and characteristic impedance of transmission lines embedded in multilayer printed circuit boards. It is based on mathematical error-removal schemes using two different length transmission lines and an advanced via-hole structure that minimizes coupling. Consequently, associated errors, due to discontinuities and interference can be effectively eliminated, and the frequency dependencies of the transmission line parameters can be clarified in wide frequency bandwidths. We verified the validity of this method in frequency ranges up to at least 18 GHz, by comparing the determined values with the theory derived from transverse electromagnetic (TEM) approximations.     

Performance prediction of a hybrid‐excitation synchronous machine with axially arranged excitation poles and permanent‐magnet poles

This paper presents a method of predicting the steady‐state performance of a new hybrid‐excitation synchronous machine (HESM) theoretically. The field pole of this HESM is axially divided into two parts; one is an excitation part and the other a permanent‐magnet (PM) part. A nonlinear equivalent circuit, which can include the saliency of the rotor and the magnetic saturation due to the iron core, is derived. Based on this equivalent circuit, the steady‐state performance of the HESM is calculated, and the results are confirmed through experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 43–49, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20033     

Electron transport in InGaO3(ZnO)m (m=integer) studied using single-crystalline thin films and transparent MISFETs

We have investigated the characteristics of transparent metal-insulator-semiconductor field-effect transistors (MISFETs) fabricated using InGaO₃(ZnO)_m (m=integer) single-crystalline thin films as n-channel layers and amorphous alumina as gate insulator films. The MISFETs exhibit good characteristics such as insensitivity to visible light illumination, off-current as low as ∼1 nA with a positive threshold voltage of ∼3 V and on/off current ratio of 10⁵. The field-effect mobility increased from ∼1 to ∼10 cm² (V s)⁻¹ as the m-value increased. Room temperature Hall mobility also increased. However, unexpectedly these values were lower than the field-effect mobility. It is explained by existence of shallow localized state in the homologous compounds.     

Clinical features of primary and secondary atypical mycobacteriosis

A clinical investigation was carried out in 39 patients with atypical mycobacteriosis (AM). The patients at our hospital diagnosed as having AM during an 11-year period from 1981 to 1991 were reviewed in this study. The incidence of AM among all of mycobacterial infections has been increasing since 1988. The atypical mycobacteria detected included M. avium complex (MAC) in 79%, M. kansasii in 26%, and other organisms in 5%. Patients who had primary infection without underlying respiratory disease were compared with those who had secondary infection. In secondary infection, MAC was detected in the sputum of a high percentage of patients and was positive for more than 6 months despite therapy. Gamma globulin levels were also increased in patients with secondary infection. Cell mediated immunity was examined by the DNCB reaction and the detection of CD4- and CD8- positive T lymphocytes. The DNCB skin reaction was positive in 6 out of 26 patients with secondary infection. The percentage of CD8- positive T lymphocytes was higher in patients with secondary disease. Fischer's ratio (indicating the balance of plasma amino acids) was also examined as an index of the nutritional status. It was significantly lower in secondary infection compared with primary infection. Moreover, secondary infection was associated with a lower positive rate for the DNCB skin reaction and a lower Fischer's ratio when compared with pulmonary tuberculosis. Thus impairment of cell-mediated immunity, malnutrition, and a poor prognosis were significantly more common in secondary infection compared with primary infection.     

A novel on-chip electrostatic discharge (ESD) protection withcommon discharge line for high-speed CMOS LSIs

A novel on-chip electrostatic discharge (ESD) protection for high-speed CMOS LSI's that operate at higher than 500 MHz has been developed. Introduction of a newly developed common discharge line (CDL) can completely eliminate the protection device influence on the inner circuit operation. This enables minimization of the I/O capacitance by shrinking the dimension of the output transistor, which also serves as a protection device in conventional devices. This new protection (CDL protection) was applied to a high-speed DRAM of which I/O pin capacitance specification is 2 pF. As a result, the ESD tolerance of 4 kV for the charged device model test, 4 kV for the human body model test, and 700 V for the machine model test were obtained. In addition, the DRAM data rate higher than 660 MHz at room temperature was achieved. The results show significant improvement for both ESD and the I/O capacitance, compared with the conventional structure     

Effects of nondensifying inclusions on the densification and microstructure of zinc oxide matrix composites

The densification and microstructure development of ZnO containing Zn₇Sb₂O₁₂, ZrO₂, and aggregated ZnO were investigated to elucidate the effect of nondensifying inclusions on the sintering of ceramic/ceramic composites. The inclusion retarded the densification, and the degree of retardation was found to depend on the chemical species of inclusion; Zn₇Sb₂O₁₂ had the largest effect, followed by ZrO₂ and then aggregated ZnO last. The experimental results for aggregated ZnO was explained by the theory which predicts the generation of backstresses. The backstresses give a less significant effect on the densification. For Zn₇Sb₂O₁₂ and ZrO₂, the microstructure of the matrix varied with distance from an inclusion particle; much porosity was observed in the region surrounding the inclusion. Circumferential voids, which are responsible for the suppression of densification, form during the initial stage of sintering. Inclusion particles generate an anchoring effect which retards the densification of the matrix immediately surrounding the inclusion particle during the intermediate stage.Supported by the Inamori Foundation.     

The effects of R-75,317 on antiglomerular basement membrane glomerulonephritis in rats

Platelet-activating factor (PAF) is a potent inflammatory mediator which is released by various inflammatory cells and produced by certain tissues, including the kidney. PAF has been shown to increase glomerular permeability to protein and to decrease glomerular filtration rate (GFR) by contracting mesangium. On the basis of these observations, it has been suspected that PAF may play a role as mediator of glomerular damage in glomerular nephritis. To examine this possibility, we studied the effects of a specific PAF antagonist, R-75,317, on the development of an experimental model of anti-glomerular basement membrane (anti-GBM) glomerulonephritis. Glomerulonephritis was initiated by injecting rabbit anti-rat GBM serum into rats. Proteinuria gradually developed after serum injection, plateaued at week 2, and remained at the high level of week 2 throughout the experimental period (6 wk). Chronic treatment with R-75,317 (10 mg/kg/day i.p.) tended to delay the onset of proteinuria and significantly accelerated the recovery phase. Creatinine clearance (Ccr) fell to 40% at week 3. R-75,317 treatment completely prevented this decline of Ccr. Histological changes in this model (glomerular hypertrophy, proliferation of mesangial matrix and interstitial fibrosis) were also ameliorated by the R-75,317 treatment. The results suggest that PAF may play a role in the development of glomerulonephritis and that PAF antagonists could be used in the treatment of human renal disease. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, May 1989.     

Preparation of SiB4±x and SiB6 plates by chemical vapour deposition of SiCl4 + B2H6 system

SiB_4±x and SiB₆ plates were prepared by chemical vapour deposition (CVD) using SiCl₄, B₂H₆ and H₂ gases under the conditions of deposition temperatures (T _dep) from 1323–1773 K, total gas pressures (P _tot) from 4–40 kPa and B/Si source gas ratio (m _B/Si=2B₂H₆/SiCl₄) from 0.2–2.8. The effects of CVD conditions on the morphology, structure and composition of the deposits were examined. High-purity and high-density SiB_4±x and SiB₆ plates about 1 mm thick were obtained at the deposition rates of 71 and 47 nm s⁻¹, respectively. The lattice parameter, composition and density of CVD SiB_4±x plates were dependent on their non-stoichiometry. The lattice parameter,a, was 0.6325 nm, butc ranged from 1.262–1.271 nm.The B/Si atomic ratio ranged from 3.1–5.0, and the density ranged from 2.39–2.45×10³ kg m⁻³. The CVD SiB₆ plates showed constant values of lattice parameters (a=1.444 nm,b=1.828 nm,c=0.9915 nm), composition (B/Si=6.0) and density (2.42×10³ kg m⁻³), independent of CVD conditions.     

High performance liquid chromatographic separation of stereoisomeric bile acids as their UV-sensitive esters

High performance liquid chromatographic separation of a series of mono-, di- and trihydroxylated 5β-cholanic acids which differ only in position and configuration of hydroxyl groups at positions C-3, C-7 and/or C-12, is reported. The C-24 free acids were derivatized to four different classes of UV-sensitive esters, i.e.,p-bromophenacyl (BP),m-methoxyphenacyl (MP), 4-nitrophthalimidemethyl (NPM) and 9-anthrylmethyl (AM) esters, and chromatographed on two, variants of C₁₈ reversed-phase columns (Nova-Pak C₁₈ and Zorbax ODS) with methanol-water systems as mobile phase. Separation efficiency and elution order of some isomeric pairs were influenced by both the structure of the C-24 ester groups and the nature of the columns used. Excellent chromatographic properties were found for those derivatives, particularly for the NPM esters.     

Using precise data sets on farming and pesticide properties to verify a diffuse pollution hydrological model for predicting pesticide concentration.

Verification of a diffuse pollution model involves comparing results actually observed with those predicted by precise model inputs. Acquisition of precise model inputs is, however, problematic. In particular, when the target catchment is large and substantial estimation uncertainty exists, not only model verification but also prediction is difficult. Therefore, in this study, rice-farming data were collected for all paddy fields from all farmers in a catchment and pesticide adsorption and degradation rates in paddy field soil samples were measured to obtain precise model inputs. The model inputs successfully verified the model's capability to predict pesticide concentrations in river water. Sensitivity analyses of the model inputs elucidated the processes significantly affecting pesticide runoff from rice farms. Pesticide adsorption and degradation rates of the soil did not significantly affect pesticide concentrations, although pesticide discharge to river water accounted for less than 50% of the total quantity of pesticide applied to fields, possibly owing to pesticide adsorption and degradation. The timing of increases in pesticide concentrations in river water was affected mostly by the farming schedule, including the time of pesticide application and irrigation, and secondarily by rainfall events.