Winding Method to Reduce Vibration and Loss Caused by Fractional Slot of Synchronous Machine

Fractional‐slot windings are widely used in rotating machines in order to improve the output voltage waveform, increase the design flexibility, and gain many other advantages. However, fractional‐slot windings are known to produce different harmonic components such as an even order and/or fractional number of space flux harmonics compared to integral‐slot windings. These harmonics may increase stray losses and cause stator core vibration. This paper describes an analysis of space flux harmonics and proposes new winding methods such as “novel interspersed windings” to reduce these harmonic components. The proposed winding methods were verified by numerical analysis and model tests.     

Development of –1 MV DC Filter and High‐Voltage DC Measurement Systems for ITER NBI

This paper presents the development results of a ?1 MV dc filter and dc measurement systems for an ITER (International Thermonuclear Experimental Reactor) neutral beam injector (NBI) system. High accuracy of 0.5% and fast responsivity of 3.3 μs, ?3 dB are required for the dc measurement systems: both dc voltage dividers and DCCTs. Circuit design and thermal flow design were carried out to clarify and minimize their effects on the accuracy and responsivity. The validity of the established design was demonstrated by the actual‐product tests; temperature rise of each components fell below the allowable value; inner components of dc filter withstood dc ?1.2 MV; each voltage divider accurately measured the voltage during the dc ?1.2 MV withstand voltage test; the voltage dividers and the DCCTs were adequate to the requirements of responsivity (3.3 μs, ?3 dB).     

Regional noise prediction and management system using remote sensing

Abstract

This paper deals with the prediction and management of regional and environmental noise using remote sensing techniques. Landsat-MSS and -TM data are used to estimate noise pollution by means of a group method of data handling. They estimate ground roughness from the proportion of the area occupied by buildings thus determining the shielding factor of noise propagation on the ground. The noise level predicted by the method presented in this paper showed a satisfactory agreement with that obtained from measurements from various other cases in urban areas.     

Effect of deformation mode,dynamic recrystallization and twinning on rolling texture evolution of AZ31 magnesium alloys

In order to obtain quantitative relationship between (0002) texture intensity and hot rolling conditions, conventional rolling experiments on AZ31 magnesium alloys were performed with 20%–40% reductions and temperatures within the range of 300–500 °C. Shear strain and equivalent strain distributions along the thickness of the rolled sheets were calculated experimentally using embedded pin in a rolling sheet. Rolling microstructures and textures in the sheet surface and center layers of the AZ31 alloys were measured by optical microscopy (OM), X-ray diffractometry (XRD) and electron back scatter diffraction (EBSD). Effects of the rolling strain, dynamic recrystallization (DRX) and twinning on the texture evolution of the AZ31 alloys were investigated quantitatively. It is found that the highest (0002) basal texture intensities are obtained at a starting rolling temperature of 400 °C under the same strain. Strain–temperature dependency of the (0002) texture intensity of the AZ31 alloy is derived.     

DISTRIBUTION OF ASCORBATE OXIDASE ACTIVITIES IN THE FRUITS OF FAMILY CUCURBITACEAE AND SOME OF THEIR PROPERTIES

Activities and some other properties of ascorbate oxidases (AAO) from the fruits of family Cucurbitaceae were investigated. The peel and the flesh of seven varieties had activities ranging between 35–56500 units/mg protein and 14–1250 units/mg protein, respectively. AAO from different varieties had a similar pH optimum of around 6–6.5 and a broad pH stability ranging from pH 5 or 6 to pH 10 or 11. These properties appear to be conserved in the AAO's from the family of Cucurbitaceae. The AAO's of melon cv. andes, kinsho and papaya were more susceptible to heat denaturation than AAO from pumpkin.     

Straight-Line Approximation for the Boundary of the Left Ventricular Chamber from a Cardiac Cineangiogram

A cardiac cineangiogram is an X-ray motion picture of the heart. Boundary detection is an essential task to compute valuable quantitative information such as the temporal volume change and the wall velocity. Previously, boundary detection methods treated frames independent of each other. Consecutive frames of a motion picture are, however, highly correlated and therefore this property can be exploited. The method described takes advantage of the known location of the boundary on previous frames. The previous boundary is divided into a set of segments along which local rectangular regions are set up on the present frame. This boundary is approximated by a set of straight lines which minimize the square error in each rectangular region with the spatial derivative as its weight. The method is a fast computing algorithm and relatively insensitive to white noise because the resultant positive and negative weights tend to cancel this effect. An experiment was carried out, and good agreement with boundaries detected by humans was obtained.     

Fabrication of a TiC0.5O0.5 anode using the carbothermal method under a non-vacuum atmosphere and its application in metal titanium electrolysis

Journal of Materials Science: Materials in Electronics - TiC0.5O0.5 was prepared through the carbothermal reduction of TiO2 under a flowing argon atmosphere, and then, it was used as an anode to...     

Efficient and Handy Texture Mapping on 3D Surfaces

There has been a rapid technical progress in three-dimensional (3D) computer graphics. But gathering surface and texture data is yet a laborious task. This paper addresses the problem of mapping photographic images on the surface of a 3D object whose geometric data are already known. We propose an efficient and handy method for acquiring textures and mapping them precisely on the surface, employing a digital camera alone. We describe an algorithm for selecting a minimal number of camera positions that can cover the entire surface of a given object and also an algorithm to determine camera's position and direction for each photograph taken so as to paste it to the corresponding surfaces precisely. We obtained a matching accuracy within a pixel on a surface through three experimental examples, by which the practicability of our method is demonstrated.     

Enhanced angular current intensity from Schottky emitters

Even though the Schottky emitter is a high‐brightness source of choice for electron beam systems, its angular current intensity is substantially lower than that of thermionic cathodes, rendering the emitter impractical for applications that require high beam current. In this study, two strategies were attempted to enhance its angular intensity, and their experimental results are reported. The first scheme is to employ a higher extraction field for increasing the brightness. However, the tip shape transformation was found to induce undesirably elevated emission from the facet edges at high fields. The second scheme exploits the fact that the angular intensity is proportional to the square of the electron gun focal length [ Fujita, S. & Shimoyama, H. (2005) Theory of cathode trajectory characterization by canonical mapping transformation. J. Electron Microsc. 54 , 331–343], which can be increased by scaling‐up the emitter tip radius. A high angular current intensity (J_Ω∼ 1.5 mA sr⁻¹) was obtained from a scaled‐up emitter. Preliminary performance tests were conducted on an electron probe‐forming column by substituting the new emitter for the original tungsten filament gun. The beam current up to a few microamperes was achieved with submicron spatial resolution.