Response surface methodology applied for Orange II photocatalytic degradation in TiO2 aqueous suspensions

BACKGROUND: Heterogeneous photocatalysis is influenced by a number of parameters involving synergistic effects; hence, an experimental strategy design that considers interactions between the main variables is needed. The response surface methodology was applied for the investigation of photodegradation of 20 mg L^?1 Orange II in aqueous solutions and for optimization of color removal efficiency. Preliminary studies were performed to identify the parameters to be selected for optimization. RESULTS: The input variables considered for experimental design were: solution initial pH, oxidizing agent (H₂O₂) initial concentration and UV‐A irradiation time. The multivariate experimental design allowed the development of a quadratic response surface model to be used for the prediction of color removal efficiency over the full range of the experimental region. Under the optimum conditions established in the region of experimentation (pH = 6.9, [H₂O₂]₀ = 183 mg L^?1 and t = 32 min), a 100% color removal efficiency was obtained in experiments. CONCLUSIONS: It was found that the variables considered have important effects on color removal efficiency. The results demonstrate that the use of experimental design strategy is indispensable for successful investigation and adequate modeling of the process because the interdependence of the reaction parameters cannot be neglected. Copyright © 2008 Society of Chemical Industry     

Simple relations for thin-film-coated, phase-retarding totally reflecting prisms

An analysis is given of the designs of thin-film coatings on totally reflecting boundaries that produce half-wave, quarter-wave, and half-quarter-wave phase retardations. Particular single-layer, doublelayer, and symmetrical triple-layer coatings that contain only one non-quarter-wave layer are considered. Simple quadratic equations are presented for the non-quarter-wave-layer phase thickness. Useful diagrams of the solution zones for layer refractive indices are obtained.     

Chalcogenide Thermoelectrics Empowered by an Unconventional Bonding Mechanism

Thermoelectric materials have attracted significant research interest in recent decades due to their promising application potential in interconverting heat and electricity. Unfortunately, the strong coupling between the material parameters that determine thermoelectric efficiency, i.e., the Seebeck coefficient, electrical conductivity, and thermal conductivity, complicates the optimization of thermoelectric energy converters. Main‐group chalcogenides provide a rich playground to alleviate the interdependence of these parameters. Interestingly, only a subgroup of octahedrally coordinated chalcogenides possesses good thermoelectric properties. This subgroup is also characterized by other outstanding characteristics suggestive of an exceptional bonding mechanism, which has been coined metavalent bonding. This conclusion is further supported by a map that separates different bonding mechanisms. In this map, all octahedrally coordinated chalcogenides with good performance as thermoelectrics are located in a well‐defined region, implying that the map can be utilized to identify novel thermoelectrics. To unravel the correlation between chemical bonding mechanism and good thermoelectric properties, the consequences of this unusual bonding mechanism on the band structure are analyzed. It is shown that features such as band degeneracy and band anisotropy are typical for this bonding mechanism, as is the low lattice thermal conductivity. This fundamental understanding, in turn, guides the rational materials design for improved thermoelectric performance by tailoring the chemical bonding mechanism.     

Some metal compounds in the phase of crosslinked ionic polymer—precursors for new sorbents and catalysts

A commercial crosslinked ionic polymer AV‐17 containing ? N(CH₃)₃Cl groups was used. The common compounds of Bi(III) and Al(III); Bi(III) and Cr(III); Bi(III) and Fe(III); Bi(III) and FeOOH and of three components—Bi(III), Fe(III), and Cr(III); Bi(III), FeOOH, and Cr(III) were obtained in the AV‐17 polymer phase and investigated using scanning electron microscopy, powder X‐ray diffraction, thermogravimetric analysis, and Fourier‐transform infrared spectroscopy. It was shown that metal‐containing compounds were concentrated on the surface of the polymer granules. The compounds were in the crystalline (BiOCl) or amorphous (jarosites and oxihydroxides) state. The morphology and composition of the metal‐containing ultra dispersed particles were different on the surface and in the volume of the polymer granule. Most of the metal‐containing compounds were in the form of pseudo spherical particles, but compounds containing Bi(III) and FeOOH in the volume of AV‐17 granule, were in the form of clew of nanometer fibers. Thermogravimetric analysis (in an N₂ atmosphere) in the range 24–1000°C of the metallic compounds containing polymer was also carried out. The metal‐containing polymer samples were stable up to 120°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Assessing plastically dissipated energy as a condition for fatigue crack growth

The suitability of using a proposed condition for simulating cyclic crack propagation in a numerical scheme is qualitatively investigated, employing the finite element method. The propagation criterion is based on a condition that relates the plastically dissipated energy to a critical value. In the finite element simulation scheme, the crack is allowed to propagate when the criterion is satisfied, and the crack propagates until the condition is no longer fulfilled. Experimentally, it is well established that a negative load ratio increases the crack propagation rate, whereas a tensile overload tends to decrease the crack propagation rate. By simulating these load conditions, we show that the proposed propagation criterion closely captures these rate changes.     

Low-intensity optical bistability in an active Fabry-Perot mirror induced by input-phase-insensitive parametric downconversion

A Fabry-Perot resonator filled with second-order nonlinear optical material is investigated. Attention is devoted to making the resonator act as a nonlinear mirror for ultralow-intensity light signals that can be switched by a control beam at the second-harmonic frequency. The interaction process is an input-phase-independent parametric downconversion. The theoretical problem is solved through implementation of a dummy variable method optimized for a parametric process. Efficient amplification and bistability of low-intensity signals have been found.     

Forbidden gaps in periodic anisotropic layered media

The general case of obliquely incident plane-wave propagation in periodic anisotropic layered media is presented. Arbitrary permittivity tensors of the two alternating anisotropic layers are considered. An immersion model is used with the assumption that each layer is embedded between two isotropic regions that have the same index of refraction as the isotropic medium of incidence and a thickness that is set equal to zero. Then explicit relations are presented for normally incident plane waves in periodic structures that consist of alternating biaxial layers of arbitrary principal-axis orientation. Specific cases of alternating isotropic and biaxial layers are also considered. Unit cell translation matrices are presented for both traveling directions, from the left to the right and vice versa. Dispersion relations that contain information regarding the propagation bands and the forbidden gaps in periodic anisotropic structures are presented.     

The void coefficient ‘Paradox’ for tight water lattices

The void coefficients in tight water lattices with enriched plutonium fuel were calculated. It was found that for the same fuel, the void coefficient is negative when the moderator is light water and positive when the moderator is heavy water. The explanation to this presumed anomally is given.     

Forbidden gaps in finite periodic and quasi-periodic cantor-like dielectric multilayers at normal incidence

Periodic and quasi-periodic Cantor-like bandgap structures that bordered upon a medium of refractive index n(0) are analyzed. An immersion model is used with the assumption that each layer is embedded between two identical regions of refractive index n(0) and thickness d(0), where d(0) is set equal to zero. Transmittance and group velocity are determined. Their dependence on n(0) is emphasized. Relations for the midgap value of the normalized group velocity are given. By use of these relations, diagrams are completed at different values of n(0), showing the pairs of quarter-wave-layer refractive indices at which there is an apparent superluminal tunneling through the finite periodic and quasi-periodic Cantor-like bandgap structures.     

Electrodeposition of bismuth, tellurium, and bismuth telluride thin films from choline chloride–oxalic acid ionic liquid

This article presents a series of preliminary results regarding the electrodeposition of bismuth, tellurium, and bismuth telluride films at 60 °C from ionic liquids, containing a mixture of choline chloride and oxalic acid (ChCl–OxA). Ten millimolar concentration solutions of BiCl₃ and TeO₂ were used as precursors in this supporting electrolyte. Cyclic voltammetry and electrochemical impedance spectroscopy techniques were used to demonstrate the deposition processes on Pt and Cu electrodes. Long-time electrolyses (30–120 min) performed at 60 °C with potential control (between ?0.22 and ?0.37 V vs. Ag reference electrode) have resulted in films deposited on copper substrate. Film surfaces were studied by scanning electron microscopy and analyzed by energy dispersive X-ray spectroscopy. The results of this study show that ChCl–OxA ionic liquid may be considered as a promising substitute of aqueous baths for Bi, Te or Bi₂Te₃ film plating.