我国堆场磷石膏工程特性分析

磷石膏堆场的渗流及稳定性分析结果的可靠度取决于磷石膏物理力学参数的准确性,因此开展磷石膏工程特性研究十分必要。根据我国不同磷石膏堆场的试验数据,分别对磷石膏的物理性质、击实特性、渗透特性、固结特性和强度特性进行了分析。结果表明:磷石膏强度、压缩、渗透特性均与其压实程度密切相关,相同压实程度不同堆场磷石膏的物理力学性质相近;磷石膏渗透特性与其晶体形态有关;磷石膏在荷载作用下具有长期蠕变变形特性,磷石膏堆场封场后仍会发生较大沉降;深部磷石膏破坏时的应变大于浅层磷石膏;磷石膏剪切破坏时产生负孔隙水压力,实际工程中可通过测试孔压的变化了解堆场坝体的安全程度。     

低密度微泡沫压井液的研究与应用

吐哈油田部分区块地层压力系数小于0.9,常规水基压井液对储层伤害大,若使用油基压井液成本高,环境污染严重。通过实验优选出了一种低密度水基微泡沫压井液。该压井液具有密度低、泡沫强度高、稳定性好、携砂能力强等优点。现场应用表明,低密度微泡沫压井液稳定时间大于48 h,密度在0.70~0.99 g/cm3之间可调,抗油污染能力强,抗油大于8%,抗温在100℃以上,岩心污染后渗透率恢复值大于80%;并且施工方便,成本低,具有储层保护能力,使用微泡沫压井液的井表皮系数在0.20~2.34之间。     

共轭梯度法在三维复杂流动数值分析中的应用

将多块网格技术运用于三维T型管复杂流场的网格生成，利用不完全乔列斯基预处理共轭梯度，双共轭梯度方法求解N－S方程的离散方程。计算表明上述方法有良好的收敛特性，适合于诸如T型管等复杂流动的分析。     

Structure and properties of CE/CTBN/EP blends: II. Effect of EP on the mechanical properties and thermostability of the CE/CTBN system

Carboxyl‐terminated butadiene‐acrylonitrile rubber (CTBN) has often been used to improve the toughness of cyanate ester (CE) resin while sacrificing modulus and thermostability. In this paper, the addition of the appropriate amount of epoxy resin (EP) to the CE/CTBN system is shown to not only increase the modulus and thermostability of the blend, but also improve the toughness. The values of impact strength showed a maximum for the CE/CTBN/EP 100/5/5 blend. The temperature of 10 % weight loss (T₁₀) improves from 376 °C for CE/CTBN 100/5 to 407 °C for the CE/CTBN/EP 100/5/2.5 blend. It is proposed that addition of the appropriate amount of EP can decrease the mobility and increase the stability of CTBN via the reaction between the terminal carboxyl group of CTBN and the hydroxyl group of EP. But a very high EP concentration will decrease the crosslinking density of CE, consequently reducing the mechanical properties and thermostability of the blends. Copyright © 2004 Society of Chemical Industry     

金堆地区浅基础设计的实践

通过对金堆地区建筑物稳定性变化的分析，提出了金堆地区浅基础设计的见解，阐明了在进行浅基础设计时，应在综合分析地质、地形、地貌、建筑物特性等因素的基础上，进行择优选择，对该地区的浅基础设计有一定的指导意义。     

Effect of processing history on the properties of Ag-based tapes

The Bi-system tapes and coils were prepared by the powder-in-tube method. The effect of processing and heat treatment on the properties of the tapes and coils was studied. It is found that the shearing stress produced by the rolling process may destroy the 2223 phase, and the destroyed 2223 phase cannot be recovered by heat treatment, whereas the pressing stress produced by the uniaxial pressing process only makes the 2223 phase grains break, and the broken 2223 phase can be closed by the heat treatment. TheJ _c values of the rolling samples, pressing sample, and the coil with a diameter of 35 mm are over 1.3×10⁴, 2.5×10⁴, and 4×10³ A/cm² (77 K, 0 T), respectively.     

落实职教战略地位走创新发展之路

大力发展职业教育是我国教育发展的战略重点。落实职教的战略地位必须走创新发展的道路，树立服务的意识和经营的观念；根据经济社会发展需求形成培养的特色和优势；加强合作，实现国际化和规模化，创新学校管理，深化教育教学改革。     

NdBO_3和 Nd(BO_2)_3的标准生成自由能

用 CaF_2单晶和 ZrO_2(+MgO)为固体电解质分别构成原电池:■和 Pt,B_((s)),NdBO_(3(s)),Nd(BO_2)_(3(s))|ZrO_2|Cr_2O_(3(s)),Cr_((s)),Pt联合测了 NdBO_3和 Nd(BO_2)_3的标准生成自由能:ΔG~0_(NdBO_3)=-1757+3.8×10~(-1)TΔG~0_(Nd)(BO_2)_3=-3435+8.8×10~(-1)T由此求出由氧化物生成 NdBO_3及 Nd((BO_2)_3)的反应的标准生成自由能变化:1/2Nd_2O_(3(s))+1/2B_2O_(3■)=NdBO_(3(s))ΔG~0_(NdBO_3)=-242+1.4×10~(-1)T和 1/2Nd_2O_(3(s))+3/2B_2O_(3(s))=Nd(BO_2)_(3■)ΔG~0′_(NdBO_2)3=-693+4.6×10~(-1)T