The size refinement of Cu crystallites under mechanical processing conditions: a phenomenological modeling approach

A phenomenological model is developed for describing the kinetics of the crystallite size refinement process of Cu powder under mechanical treatment conditions. Based on the evidence that collisions represent the elementary events of energy transfer, the rate of crystallite size decrease is related on a statistical basis to the amount of powder trapped at each collision, to the number of collisions and to the collision energy. The mathematical approach allows for identifying the approximate functional form of the kinetic curves obtained at largely different impact energies. The values of the apparent kinetic constants and of the model parameters involved can be thus estimated by fitting the model curves to the experimental data. The results obtained provide a deeper insight into the details of the crystallite size refinement process.     

Erosion-corrosion of a stainless steel distillation column in food industry

Unusual extended corrosion phenomena were detected in a distillation column made in AISI type 316 stainless steel (UNS S31600) of a plant for natural pectins extraction from citrus. The column was the first of a series of two distillation columns representing the unit core. Corrosion problems were observed only in that column and mainly along the surface of the trays located in the lower section of the column. The phenomenon was observed subsequently to a modification of the original plant layout that caused an increase of the operating temperatures and turbulence of the process stream inside the column.     

Mortality in a cohort of men expressing the glucose-6-phosphate dehydrogenase deficiency

The objective of this study was to test the hypothesis of a lower mortality from cancer and cardiovascular diseases among men expressing glucose-6-phosphate dehydrogenase (G6PD) deficiency. We designed a mortality study based on death certificates from January 1, 1982 through December 31, 1992 in a cohort of G6PD-deficient men. Cohort members were 1,756 men, identified as expressing the G6PD-deficient phenotype during a 1981 population screening of the G6PD polymorphism. The setting was the island of Sardinia, Italy. Outcome measures were cause-specific standardized mortality ratios (SMRs), which were computed as 100 times the observed/expected ratio, with the general Sardinian male population as the reference. Deaths from all causes were significantly less than expected due to decreased SMRs for ischemic heart disease (SMR, 28; 95% confidence interval [CI], 10 to 62), cerebrovascular disease (SMR, 22; 95% CI, 6 to 55), and liver cirrhosis (SMR, 12; 95% CI, 0 to 66), which explained 95.6% of the deficit in total mortality. All cancer mortality was close to the expectation, with a significant increase in the SMR for non-Hodgkin's lymphoma (SMR, 545; 95% CI, 147 to 1,395). A decrease in mortality from cardiovascular diseases was one of the study hypotheses, based on an earlier human report and experimental evidence. However, selection bias is also a likely explanation. Further analytic studies are warranted to confirm whether subjects expressing the G6PD-deficient phenotype are protected against ischemic heart disease and cerebrovascular disease. This cohort study is consistent with more recent case-control studies in rejecting the hypothesis of a decreased cancer risk among G6PD-deficient subjects. The observed increase in mortality from non-Hodgkin's lymphoma and decrease in mortality from liver cirrhosis were not previously reported.     

Sintered stainless steels: Fatigue crack propagation resistance under hydrogen charging conditions

Monophasic and multiphasic (two and three phases) sintered stainless steels were prepared both considering premixes of AISI 316LHC and AISI 434LHC stainless steels powders and using a prealloyed duplex stainless steel 25% Cr, 5% Ni, 2% Mo powder. Their fatigue crack propagation resistance was investigated both in air and under hydrogen charging conditions (0.5 M H₂SO₄ + 0.01 M KSCN aqueous solution; applied potential = −700 mV/SCE), considering three different stress ratios (R = 0.1; 0.5; 0.75). Fatigue crack propagation micromechanisms were investigated by means of fracture surface scanning electron microscope (SEM) analysis.For all the investigated sintered stainless, fatigue crack propagation resistance is influenced by hydrogen charging and an increase of crack growth rates dependent on the steel microstructure is obtained. Experimental results also allow to identify the sintered stainless steel obtained from the prealloyed 25% Cr, 5% Ni, 2% Mo powder as the most resistant to fatigue crack propagation in air and under hydrogen charging conditions.     

Protein design to understand peptide ligand recognition by tetratricopeptide repeat proteins

Protein design aims to understand the fundamentals of protein structure by creating novel proteins with pre-specified folds. An equally important goal is to understand protein function by creating novel proteins with pre-specified activities. Here we describe the design and characterization of a tetratricopeptide (TPR) protein, which binds to the C-terminal peptide of the eukaryotic chaperone Hsp90. The design emphasizes the importance of both direct, short-range protein-peptide interactions and of long-range electrostatic optimization. We demonstrate that the designed protein binds specifically to the desired peptide and discriminates between it and the similar C-terminal peptide of Hsp70.     

Bioactivity of Phenanthrenes from Juncus acutus on Selenastrum capricornutum

Twenty-five 9,10-dihydrophenanthrenes, four phenanthrenes, a dihydrodibenzoxepin, and a pyrene, isolated from the wetland plant Juncus acutus, were tested to detect their effects on the green alga Selenastrum capricornutum. Nine of the compounds were isolated and identified for the first time. Most of the compounds caused inhibition of algal growth. The 9,10-dihydrophenanthrenes 1, 5, 21, and 22 were the most active.     

A new contact model for the discrete element method simulation of $$\hbox {TiO}_2$$ nanoparticle films under mechanical load

We develop a novel coarse-grained contact model for Discrete Element Method simulations of \(\hbox {TiO}_2\) nanoparticle films subjected to mechanical stress. All model elements and parameters are derived in a self-consistent and physically sound way from all-atom Molecular Dynamics simulations of interacting particles and surfaces. In particular, the nature of atomic-scale friction and dissipation effects is taken into account by explicit modelling of the surface features and water adsorbate layers that strongly mediate the particle-particle interactions. The quantitative accuracy of the coarse-grained model is validated against all-atom simulations of \(\hbox {TiO}_2\) nanoparticle agglomerates under tensile stress. Moreover, its predictive power is demonstrated with calculations of force-displacement curves of entire nanoparticle films probed with force spectroscopy. The simulation results are compared with Atomic Force Microscopy and Transmission Electron Microscopy experiments.     

Multipurpose modular experimental station for the DiProI beamline of Fermi@Elettra free electron laser

We present a compact modular apparatus with a flexible design that will be operated at the DiProI beamline of the Fermi@Elettra free electron laser (FEL) for performing static and time-resolved coherent diffraction imaging experiments, taking advantage of the full coherence and variable polarization of the short seeded FEL pulses. The apparatus has been assembled and the potential of the experimental setup is demonstrated by commissioning tests with coherent synchrotron radiation. This multipurpose experimental station will be open to general users after installation at the Fermi@Elettra free electron laser in 2011.