膨胀水泥浆体系在苏丹1/2/4区块水平井固井中的应用

随着苏丹1／2／4区块的深入开发，为了加快开发主力油层，提高原油产量，降低钻井成本，GNPOC在此区块布置水平井开发任务。所开发的区域主要分布于Heglig，Munga，Simbir，Bamboo区块，油层所在是Zaqar和Bentiue地层。此层位具有高渗透，地层温度高，易塌、气窜等复杂问题，尤其是Heglig和Munga地区井壁坍塌严重。为此，根据地质资料、井身结构和对水平井注水泥的技术要求，科学合理设计施工工艺，优选出适合此地区固井施工的冲洗液和隔离液，特别是经过努力实践，开发出了新型膨胀水泥浆体系，此体系具有高强度、低失水、无析水、防气窜之功效。结合使用哈里伯顿CPT—Y4大功率固井车，精确计量和自动密度控制，该体系水泥浆目前已在7口水平井施工中得以应用，均为优质井。现正在被大量使用，此体系的开发，解决了该固井技术难题，创造了中国固井在海外首次水平井作业一次成功的历史记录，具有较高的经济和社会效益。     

陶瓷材料的冷加工与热处理

综述评述最近发展起来的陶瓷材料的烧结后冷加工热处理法“控制破碎成形加工法”，着重介绍该方法的由业，阐明其理论与实验基础，同时，介绍其应用并讨论其发展前景。     

多路红外防盗报警器

介绍一种利用热释红外线传感器探头作为探测器的多路防盗报警器.该报警器能够自动完成交直流供电转换,具有灵敏度高、电压适用范围宽、准确可靠等特点,并配有多种声光报警方式.给出了该报警器的基本原理和方框图。     

筒形件反旋工艺塑性流动刚塑性有限元分析

建立了筒形件反旋工艺平面变形刚塑性有限元分析的力学模型，比较了把反旋工艺视为正挤和本文力学模型条件下的速度场，有限元分析结果与反旋实际条件相符。     

Influence of base resistance on extracting thermal resistance for SiGe HBTs

In this article, the influence of base resistance on extracting thermal resistance for SiGe heterojunction bipolar transistors is studied and an improved approach for determining the junction temperature and thermal resistance is presented. The proposed method for extracting thermal resistance is based on the temperature sensitivity of the base–emitter (B–E) voltage when the device is biased with a fixed emitter current density. This approach not only takes into account the self‐heating during the different ambient temperature measurement but also revises the empirical equation of B–E voltage due to the influence of base resistance during the power dissipation increment measurement. Results are obtained for devices with different emitter lengths and fingers. Compared with the conventional method, the thermal resistance is about up to 15% improvement for the device with 0.3 × 1.9 μm² emitter area and 13.8% for the device with 0.3 × 13.9 μm² emitter area. The accurate thermal resistance implemented in HICUM model has resulted in better fit for transistor output characteristics. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

基于层次认知模型的大学计算机课程多元混合教学模式设计与实施

根据计算思维理论中从知识到能力转变的递进过程,构建了基于层次认知模型的多元混合式教学课程体系和教学模式,并以大学计算机课程为例,以学生自主学习和协作学习为教学出发点,开发、整合出优质教学资源,设计了多样化教学活动,以培养学生综合应用计算机的软硬件知识解决本专业的实际问题为目的,最终应用到“SPOC+翻转课堂”混合教学中,达到教学目标。     

Synthesis of nano Sb-encapsulated pyrolytic polyacrylonitrile composite for anode material in lithium secondary batteries

A novel process was proposed to synthesize nano Sb-encapsulated pyrolytic polyacrylonitrile composite for anode material in lithium secondary batteries. The preparation started with the dissolution of SbCl₃ and polyacrylonitrile (PAN) in dimethylformamide (DMF) solution, followed by the addition of KBH₄ to reduce Sb³⁺ in the solution. The Sb composite was obtained by pyrolysis of the Sb/PAN mixture that precipitated out when the DMF solution was added by plentiful water. The TEM analysis showed that about 100-200 nm Sb particles were embedded by the pyrolyzed PAN, which provided a conductive matrix to relieve the morphological change of Sb during electrochemical cycling. As-prepared composite presented good cycleability for lithium storage. The proposed process paves an effective way to prepare high performance alloy based composite anode materials for high performance lithium-ion batteries.     

In situ composite of nano SiO2-P(VDF-HFP) porous polymer electrolytes for Li-ion batteries

Nano SiO₂-P(VDF-HFP) composite porous membranes were prepared as the matrix of porous polymer electrolytes through in situ composite method based on hydrolysis of tetraethoxysilane and phase inversion. SEM, TEM, DSC and AC impedance analysis were carried out. It is found that the in situ prepared nano silica was homogeneously dispersed in the polymeric matrix, enhanced conductivity and electrochemical stability of porous polymer electrolytes, and improved the stability of the electrolytes against lithium metal electrodes. The in situ composite method was found to be much better than the direct composite method in lowering the interfacial resistance between electrolyte and lithium metal electrode. Moreover, cycle test of lithium batteries using lithium metal as anode and sulfur composite material as cathode showed that the electrolyte based on in situ composite of silica presented stable charge-discharge behavior and little capacity loss of battery.     

从网络安全角度剖析银行卡的信息安全

伴随着信息社会的飞速发展,现代社会中银行卡的使用日渐普及。人们通过有线或无线网络都可以进行资金的转账和消费。银行卡的资金安全关系到我们每一个人的正常生活,所以必须最大程度地确保银行卡信息的安全。本文从网络安全加密手段的角度,分析了我们在使用银行卡时应注意哪些方面以及在网络信息传输中保证信息安全的方法,找出其中的关键因素,以提高人们的防范意识。     

Charge/discharge characteristics of sulfur composite cathode materials in rechargeable lithium batteries

The charge and discharge characteristics of lithium batteries with sulfur composite cathodes have been investigated. The sulfur composites showed novel electrochemical characteristics. The analysis of the differential capacity indicated that the discharge process showed two voltage plateaus of 2.10 V and 1.88 V, and the charge process also presented two voltage plateaus of 2.22 V and 2.36 V. The overcharge test showed that the composite cannot be charged over 4.0 V, the voltage always stopped at about 3.9 V during charging, indicating that the composite presented the intrinsic safety for the overcharge of lithium batteries. The overcharge can cause serious safety problem for the conventional Li-ion batteries. The overcharge test also showed that the batteries with sulfur composite were destroyed when the upper cut-off voltage was over 3.6 V. However, the composite presented good reversible capacity after it was deep discharged even to 0 V. It showed stable cycleability and high cycling capacity of 1000 mAh g⁻¹ when cycling between 0.1 V and 3.0 V, indicative of the different characteristic from the conventional oxide cathode materials. The prototype polymer battery with the composite cathode material presented the energy density of 246 Wh kg⁻¹ and 401 Wh L⁻¹.