Surface reconstruction techniques: a review

Surface reconstruction means that retrieve the data by scanning an object using a device such as laser scanner and construct it using the computer to gain back the soft copy of data on that particular object. It is a reverse process and is very useful especially when that particular object original data is missing without doing any backup. Hence, by doing so, the data can be recollected and can be stored for future purposes. The type of data can be in the form of structure or unstructured points. The accuracy of the reconstructed result should be concerned because if the result is incorrect, hence it will not exactly same like the original shape of the object. Therefore, suitable methods should be chosen based on the data used. Soft computing methods also have been used in the reconstruction field. This papers highlights the previous researches and methods that has been used in the surface reconstruction field.     

Estimation of the minimum machining performance in the abrasive waterjet machining using integrated ANN-SA

In this study, Artificial Neural Network (ANN) and Simulated Annealing (SA) techniques were integrated labeled as integrated ANN-SA to estimate optimal process parameters in abrasive waterjet (AWJ) machining operation. The considered process parameters include traverse speed, waterjet pressure, standoff distance, abrasive grit size and abrasive flow rate. The quality of the cutting of machined-material is assessed by looking to the roughness average value (R_a). The optimal values of the process parameters are targeted for giving a minimum value of R_a. It was evidence that integrated ANN-SA is capable of giving much lower value of R_a at the recommended optimal process parameters compared to the result of experimental and ANN single-based modeling. The number of iterations for the optimal solutions is also decreased compared to the result of SA single-based optimization.     

Genetic Algorithm and Simulated Annealing to estimate optimal process parameters of the abrasive waterjet machining

In this study, two computational approaches, Genetic Algorithm and Simulated Annealing, are applied to search for a set of optimal process parameters value that leads to the minimum value of machining performance. The objectives of the applied techniques are: (1) to estimate the minimum value of the machining performance compared to the machining performance value of the experimental data and regression modeling, (2) to estimate the optimal process parameters values that has to be within the range of the minimum and maximum coded values for process parameters of experimental design that are used for experimental trial and (3) to evaluate the number of iteration generated by the computational approaches that lead to the minimum value of machining performance. Set of the machining process parameters and machining performance considered in this work deal with the real experimental data of the non-conventional machining operation, abrasive waterjet. The results of this study showed that both of the computational approaches managed to estimate the optimal process parameters, leading to the minimum value of machining performance when compared to the result of real experimental data.     

The study on the properties of TiCxN1−x coatings processed by cathodic arc physical vapour deposition

Titanium carbonitride (TiCN) is a popular hard coating for carbide cutting tools in various applications. The properties of TiCN are within its composition and can be controlled by maintaining the C–N ratio within the coating to a certain level. This paper studied the influence of carbon content and coating composition within TiC_xN_1?x coatings with regard to their mechanical properties. The substrate used was tungsten carbide (WC-6Co), which was prepared in-house through a powder metallurgy process, while the TiC_xN_1?x coatings were deposited in-house using cathodic arc physical vapour deposition (CAPVD). TiC_xN_1?x coatings improved the mechanical properties of carbide inserts. An increase in carbon content within TiC_xN_1?x coatings improved surface lubricity, reduced coefficient of friction, improved surface microhardness and increased Young's modulus, but reduced thermal conductivity of carbide inserts. The colour of TiC_xN_1?x coatings also changed with carbon content.     

Effects of plasma treatment on biocompatibility of poly[(L‐lactide)‐co‐(ϵ‐caprolactone)] and poly[(L‐lactide)‐co‐glycolide] electrospun nanofibrous membranes

Poly[(l ‐lactide)‐co ‐(? ‐caprolactone)] (PLCL) and poly[(l ‐lactide)‐co ‐glycolide] (PLGA) copolymers are widely used in neural guide tissue regeneration. In this research, the surface modification of their hydrophilicity was achieved using plasma treatment. Attachment and proliferation of olfactory ensheathing cells on treated electrospun membranes increased by 26 and 32%, respectively, compared to the untreated PLCL and PLGA counterparts. Cells cultivated on both the PLCL and PLGA membranes showed high viability (>95%) and healthy morphologies with no evidence of cytotoxic effects. Cells grown on treated electrospun fibres displayed significant increases in mitochondrial activity and reductions in membrane leakage when compared to untreated samples. The results suggested that plasma treatment of the surface of the polymers enhanced both cell viability and growth without incurring any cytotoxic effects. © 2017 Society of Chemical Industry     

Potential Pro-Inflammatory Effect of Vitamin E Analogs through Mitigation of Tetrahydrocannabinol (THC) Binding to the Cannabinoid 2 Receptor

Vitamin E acetate, which is used as a diluent of tetrahydrocannabinol (THC), has been reported as the primary causative agent of e-cigarette, or vaping, product use-associated lung injury (EVALI). Here, we employ in vitro assays, docking, and molecular dynamics (MD) computer simulations to investigate the interaction of vitamin E with the membrane-bound cannabinoid 2 receptor (CB2R), and its role in modulating the binding affinity of THC to CB2R. From the MD simulations, we determined that vitamin E interacts with both CB2R and membrane phospholipids. Notably, the synchronized effect of these interactions likely facilitates vitamin E acting as a lipid modulator for the cannabinoid system. Furthermore, MD simulation and trajectory analysis show that when THC binds to CB2R in the presence of vitamin E, the binding cavity widens, facilitating the entry of water molecules into it, leading to a reduced interaction of THC with CB2R. Additionally, the interaction between THC and vitamin E in solution is stabilized by several H bonds, which can directly limit the interaction of free THCs with CB2R. Overall, both the MD simulations and the in vitro dissociation assay results indicate that THC binding to CB2R is reduced in the presence of vitamin E. Our study discusses the role of vitamin E in limiting the effect of THCs and its implications on the reported pathology of EVALI.     

Synthesis and Characterization of Molecularly Imprinted Polymer Membrane for the Removal of 2,4-Dinitrophenol

Molecularly imprinted polymers (MIPs) were prepared by bulk polymerization in acetonitrile using 2,4-dinitrophenol, acrylamide, ethylene glycol dimethacrylate, and benzoyl peroxide, as the template, functional monomer, cross-linker, and initiator, respectively. The MIP membrane was prepared by hybridization of MIP particles with cellulose acetate (CA) and polystyrene (PS) after being ground and sieved. The prepared MIP membrane was characterized using Fourier transform infrared spectroscopy and scanning electron microscopy. The parameters studied for the removal of 2,4-dinitrophenol included the effect of pH, sorption kinetics, and the selectivity of the MIP membrane. Maximum sorption of 2,4-nitrophenol by the fabricated CA membrane with MIP (CA-MIP) and the PS membrane with MIP (PS-MIP) was observed at pH 7.0 and pH 5.0, respectively. The sorption of 2,4-dinitrophenol by CA-MIP and PS-MIP followed a pseudo–second-order kinetic model. For a selectivity study, 2,4-dichlorophenol, 3-chlorophenol, and phenol were selected as potential interferences. The sorption capability of CA-MIP and PS-MIP towards 2,4-dinitrophenol was observed to be higher than that of 2,4-dichlorophenol, 3-chlorophenol, or phenol.     

A cellular automata model for circular movements of pedestrians during Tawaf

Masjid Al-Haram in Saudi Arabia is one of the most crowded pilgrimage locations in the world. More than two million pilgrims gather in Saudi Arabia annually during the Hajj season, and it is compulsory for them to perform a series of actions in the mosque. In the court area, pilgrims perform one of the most important rituals of Hajj, called Tawaf, which consists of seven laps of circular movement around the Kaabah, which is situated in the centre of the court. After the Tawaf, pilgrims pray in the court and leave from one of several doors. In this paper, we present a cellular automata model for the simulation of the pilgrims’ circular Tawaf movement. We also use a discrete-event model to simulate the actions and behaviours of the pilgrims. The proposed models are used in a software platform to simulate the actions and movements of pilgrims in the area. We then present an example application of the model in predicting whether specific changes to the architecture could increase the throughput of the system.     

Design of conical DRH antennas for K and Ka frequency bands

Two conical double‐ridged horn (DRH) antennas for K and Ka frequency bands are presented. Detailed simulation and experimental investigations are conducted to understand their behaviors and optimize for broadband operation. The designed antennas were fabricated with 0.01 mm accuracy and satisfactory agreement of computer simulations and experimental results was obtained. The designed conical DRH antennas have voltage standing wave ratio (VSWR) less than 2.1 and 2.2 for the frequency ranges of 18–26.5 GHz (K band) and 26.5–40 GHz (Ka band), respectively. Meanwhile, the proposed antennas exhibit low cross‐polarization, low sidelobe level, and simultaneously achieve slant polarization as well as symmetrical radiation patterns in the entire operating bandwidth. An exponential impedance tapering is used at the flare section of the horns. Moreover, a new cavity back with a conical structure is used to improve the VSWR. Numerous simulations via Ansoft HFSS and CST Microwave Studio CAD tools have been made to optimize the VSWR performance of the designed antennas. Simulation results show that the VSWR of the proposed antennas is sensitive to the probe spacing from the ridge edge and the cavity back structure. The designed conical DRH antennas are most suitable as a feed for the reflectors of radar systems and satellite applications. Results for VSWR, far‐field E‐plane and H‐plane radiation patterns, and gain of the designed antennas are presented and discussed. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.     

Extraction and separation of molybdenum(VI) from acidic media by fatty hydrazides

BACKGROUND: The increasing demand for molybdenum has encouraged the development of low‐cost and environmentally friendly extractants to recycle and recover this metal. In the present study, solvent extraction of Mo(VI) from acidic media using a mixture of fatty hydrazides synthesised from palm olein as the extractant was carried out. The effects of various parameters such as acid, diluent, contact time, extractant concentration, metal ion concentration and stripping agent and the separation of Mo(VI) from other metal ions such as Co(II), Ni(II), Al(III) and Mn(II) were investigated. RESULTS: It was found that the extraction of Mo(VI) into the organic phase involved the formation of 1:3 complexes. Mo(VI) was successfully separated from commonly associated metal ions such as Ni(II), Co(II), Al(III) and Mn(II). Mo(VI) stripping from the loaded organic phase was studied using different acidic and alkaline solutions and was found to be optimal with ammonium hydroxide solution. CONCLUSION: These results are useful for the development of a method to recover Mo(VI) from acidic media utilising fatty hydrazides as the extractant. Copyright © 2008 Society of Chemical Industry