Unipolar plasma electrolytic oxidation: Waveform optimisation for corrosion resistance of commercially pure titanium

This study deals with the anodisation of titanium grade 2 in 0.5-M sulphuric acid using a pulsed signal in a unipolar regime. The electrical parameters investigated are voltage, frequency and duty cycle. The use of duty cycles with a high percentage of anodic polarisation (90%), combined with high frequencies (1000 Hz) and the higher voltage tested (220 V), favoured the establishment of a plasma regime involving strong dielectric discharges, allowing the growth of thicker oxides but with rough architecture. The corrosion resistance of the formed film has been characterised by potentiodynamic tests in 0.5-M NaBr for localised corrosion resistance and by immersion tests in 10% v/v sulphuric acid solution for a uniform corrosion assessment. Current–time curves, visual observations and electron microscope analysis (scanning electron microscopy, energy-dispersive X-ray spectroscopy) were the tools selected to provide a correlation between technological parameters and oxide growth mechanism. For localised and uniform corrosion, anodisation at 220 V with a high level of anodic polarisation (90%) and frequency (1000 Hz) was verified to be particularly advantageous.     

Pulsed Electromagnetic Field Stimulation in Osteogenesis and Chondrogenesis: Signaling Pathways and Therapeutic Implications

Mesenchymal stem cells (MSCs) are the main cell players in tissue repair and thanks to their self-renewal and multi-lineage differentiation capabilities, they gained significant attention as cell source for tissue engineering (TE) approaches aimed at restoring bone and cartilage defects. Despite significant progress, their therapeutic application remains debated: the TE construct often fails to completely restore the biomechanical properties of the native tissue, leading to poor clinical outcomes in the long term. Pulsed electromagnetic fields (PEMFs) are currently used as a safe and non-invasive treatment to enhance bone healing and to provide joint protection. PEMFs enhance both osteogenic and chondrogenic differentiation of MSCs. Here, we provide extensive review of the signaling pathways modulated by PEMFs during MSCs osteogenic and chondrogenic differentiation. Particular attention has been given to the PEMF-mediated activation of the adenosine signaling and their regulation of the inflammatory response as key player in TE approaches. Overall, the application of PEMFs in tissue repair is foreseen: (1) in vitro: to improve the functional and mechanical properties of the engineered construct; (2) in vivo: (i) to favor graft integration, (ii) to control the local inflammatory response, and (iii) to foster tissue repair from both implanted and resident MSCs cells.     

Removal of E. coli and helminth eggs in UASB: Polishing pond systems in Brazil.

Ponds following anaerobic reactors, such as Upflow Anaerobic Sludge Blanket (UASB) reactors, have been termed polishing ponds in the literature. The present paper analyses the removal of E. coli and helminth eggs in five UASB-polishing pond systems in Brazil. Since there were ponds in series, the total number of ponds was 10. The ponds had average retention times varying from 2 to 21 days, and depths ranging from 0.40 to 2.00 m. The shallow ponds in series, even with low retention times, were able to produce effluents complying with the coliform WHO guidelines for unrestricted irrigation (< or = 1000 MPN/100 ml). An equation for the coliform decay coefficient was proposed: Kb (dispersed flow) = 0.710H(-0955) (20 degrees C). The equation highlights the inverse relationship between the pond depth and the decay coefficient. All polishing pond systems were able to produce effluents with helminth eggs concentrations predominantly equal to zero, and satisfying the WHO guidelines for unrestricted and restricted irrigation (< or = 1 egg/L, arithmetic mean). The approximate range of helminth eggs removal efficiency was predicted satisfactorily.     

An incomplete gauge formulation for 3D nodal finite-elementmagnetostatics

A method for imposing the gauge condition on the 3-D magnetic vector potential magnetostatic field computation using nodal finite elements is presented. In this method, the gauge A.w=0 is applied in the part of the problem that is not situated in the neighborhood of the materials interfaces that are tangential to w . This results in a formulation which maintains the discontinuous properties of the magnetic induction tangential components, reduces the number of unknowns, and improves the system matrix conditioning. The proposed formulation is compared with the Coulomb-gauge and ungauged formulations, showing that it results in better precision and worse conditioning than the Coulomb-gauge and has the same precision with a better conditioning than the ungauged formulation     

Geometric criteria of hydrogen bonds in proteins and identification of `bifurcated' hydrogen bonds

Empirical criteria for identification of hydrogen bonds wereanalyzed to produce a set of geometrically consistent criteria.For a data set of 30 structures, application of a set of purelygeometrical criteria, along with exclusion of abnormal backboneconformations, also excluded a common interaction of Ser/Thrside chains with Asp/Glu side chains ([ST]/[DE] pairs). Theseinteractions were termed `bifurcated hydrogen bonds/', whichimplies delocalization of a positively charged hydrogen of hydroxylbetween the two acceptor atoms of the carboxylic group. These`bifurcated/' interactions are among the most common packingpatterns for [ST]/[DE] pairs of side chains. Therefore, theidentification of hydrogen bonds cannot be based on geometricalcriteria only and requires introduction of some physico-chemicalcriteria.     

New HPLC Method to Determine Ethyl Carbamate in Alcoholic Beverages Using Fluorescence Detection

ABSTRACT: A new methodology to the quantification of ethyl carbamate (EC) has been developed. This method allows the analysis by HPLC of ethyl carbamate in samples of wine, fortified wine, and wine brandy, by a pre-column derivatization with 9-xanthydrol, and fluorescence detection. This does not require previous sample extraction or concentration. The method presents an average recovery of 96% among samples studied, a detection limit of 4.2μg/L, and an average intermediate precision of 6.3%. The comparison of the results obtained for EC analysis on the same wine brandy samples by GC/MS and HPLC are statistically indistinguishable with 97.5% probability. The results of the analysis of 42 samples are presented.     

Effect of Dilution and Porosity on Self-Propagating High-Temperature Synthesis of Silicon Nitride

Self-propagating high-temperature synthesis is a very easy and low-cost method to synthesize Si₃N₄. The nitriding of silicon powder takes place in a self-sustained regime under high pressures of nitrogen with dilution of silicon by Si₃N₄. In this work effects of dilution and green-mixture porosity on combustion velocity and phase content of reaction products are studied. Results are compared with previous work of other authors and different behaviors are found. An explanation of these behaviors is given.     

How disorder can diminish avalanche risks: effect of size distribution

We study the behavior of disk assemblies with a variable disorder distribution. The packing is first consolidated and then continuously tilted very slowly. The amount of displaced disks for each tilted angle is recorded. Large displacements of the disks can occur due to some local or global mechanical instabilities. The definition of neighboring disks is based on radical (extension of Voronoï) tessellation rules to decompose, in a unique and perfectly defined manner, the two-dimensional space for polydisperse disks. In this way, by comparing the characteristics of stability for one disk to the neighboring ones for local ordered cluster, we can predict the global amount of displaced disks. Some tilting cycles have been performed to check the correlation between the instability of the packing structure (collective displacements) with micro and macro order parameters.     

A SVET investigation on the modification of zinc dust reactivity

Weldable primers are thin zinc-rich organic coatings that are weldable due to the electrical conductivity provided by the zinc dust. They are used in the automotive industry to provide corrosion protection in regions of difficult access. The zinc particles are highly susceptible to corrosion attack and, due to the small thickness, the protection conferred by these systems is limited.     

Nephrotic syndrome. What is new since the 1988 study?

Hormone-refractory prostate cancer (HRPC) patients often have nonmeasurable disease. In such patients, predictive biomarkers other than tumor response may be required to compare therapeutic effects. We examined the predictive value for survival of various clinical and laboratory parameters, including prostate-specific antigen (PSA), in HRPC patients treated with suramin. Data from 103 HRPC patients were analyzed using various survival analyses, the likelihood ratio approach, and logistic regression analyses. When pretreatment factors, percentage decrease in PSA at 4 weeks from start of treatment (deltaPSA), and updated survival data were fit by a multivariate Cox proportional hazards model, acid phosphatase, lactate dehydrogenase, and deltaPSA were significant, with risk ratios close to 1. There was a decrease in likelihood ratio with increasing APSA. A logistic regression model was developed to predict the probability of <1 year of survival from the start of treatment. Hemoglobin and deltaPSA were found to be significant variables. However, in view of the complexities involving the relationship between PSA expression and prostate cancer growth and possible selective effect of treatment on PSA, further prospective testing is necessary. Therefore, deltaPSA cannot necessarily be used as a biomarker for survival response in individual patients during the evaluation of the therapeutic response of HRPC to new antineoplastic drugs.