An extended pharmacokinetic/pharmacodynamic model describing quantitatively the influence of plasma protein binding, tissue binding, and receptor binding on the potency and time course of action of drugs

An extended pharmacokinetic/pharmacodynamic (PK/PD) model is presented, in which the effect of binding of the drug to plasma proteins and to tissue binding sites in a peripheral compartment, and nonspecific and receptor binding in the effect compartment are taken into account. It represents an extension of the classical Sheiner model, and the model proposed by Donati and Meistelman. The present model is characterized by the following parameters: Kue (exit rate constant of unbound drug from the effect compartment), Pue (ratio of the unbound clearances to and from the effect compartment), fue (fraction of drug in effect compartment that is not bound to nonspecific binding sites), Kd (equilibrium dissociation constant of drug-receptor binding), and Rtot (concentration of receptor binding sites in effect compartment). The rate of association and dissociation of the drug-receptor complex can be incorporated in the model. The influence of the pharmacokinetic parameters (V1, V2, fu, fu2, CLu10, CLu20, CLu12, CLu21) and the PK/PD model parameters (kue, Pue, fue, Kd, Rtot) on various dynamic parameters is analyzed. These include potency (single dose needed to produce 90% effect, ED90), constant infusion dosing rate needed to maintain a constant effect of 90%, time to maximum effect (onset time), and duration to 90% recovery. The neuromuscular blocking agent vecuronium is used as an example. It is shown that both potency and time course of action are strongly dependent on the ratio V1/fu, CLu10, kue, Pue (at equipotent doses the time course is not affected by Pue), fue, Kd, and Rtot (only if Rtot is high), whereas they are less affected by the ratio V2/fu2, CLu20, CLu12, and CLu21. In general, the model parameters affect the ED90 and the time course of action in the same direction, e.g., an increase of V1 results in an increase of ED90 and an increase of onset time and duration. However, the unbound clearance CLu10, the intercompartmental unbound clearance CLu12 and the receptor affinity Kd have an opposite effect on ED90 and the time course parameters, e.g., an increase of CLu10 results in an increase of ED90 and a decrease of onset time and duration. This effect may be responsible for the inverse relationship between onset time and potency of neuromuscular blocking drugs observed in animal experiments and clinical studies. We demonstrate that PK/PD analysis using the traditional effect compartment model (Sheiner model) results in an apparent value of keo, which is a function of kue, fue, Kd, Rtot, as well as the unbound drug concentration in the effect compartment Cue. On the other hand, the model proposed by Donati and Meistelman gives correct values of keo (equal to the product fue.kue), but the receptor affinity Kd and the receptor density Rtot obtained by this method are apparent values, which depend on fu, fue, and Pue.     

Kinetics of two-step anionic polymerization

This article deals with the kinetics of two-step anionic polymerization by way of a non-steady state method. Several molecular parameters can be evaluated using the formulae developed. A bimodal molecular weight distribution function for the resulting polymer is derived from the set of kinetic differential equations, which is in agreement with the experimental data reported.     

心电地图仪中工频干扰的一种滤除方法

在心电地图仪中记录到的体表心电信号往往由于电磁的影响而引进工频干扰．基于体表心电信号中工频干扰的特点，作者提出了一种滤除工频干扰的方法，即就单独—胸导联信号通过提高频谱的分辨率来估计工频干扰的频率；基于最小均方误差准则来估计各导联信号中工频干扰的幅度和相位。文中还给出了该算法的流程图和滤波性能分析。模拟结果表明了该算法的有效性。应用该算法对心电地图仪中的工频干扰进行对消，取得了满意的结果。     

Unexplained physical symptoms: outcome, utilization of medical care and associated factors

BACKGROUND: Measurement of intracardiac hemodynamic parameters has been limited to brief periods in the acute care setting. We developed and evaluated an implantable hemodynamic monitor that is capable of measuring chronic right ventricular oxygen saturation and pulmonary artery pressure. METHODS AND RESULTS: The device consists of an electronic controller placed subcutaneously and two transvenous leads placed in the right ventricle (reflectance oximeter) and pulmonary artery (variable capacitance pressure sensor). Implantation was performed in 10 patients with severe left ventricular dysfunction. Average implant pulmonary artery pressures were systolic, 52 +/- 16 mm Hg; diastolic, 29 +/- 11 mm Hg; and mean, 40 +/- 12 mm Hg. The mean right ventricular oxygen saturation at implant was 51%. Provocative maneuvers, including postural changes, sublingual nitroglycerin, and bicycle exercise, demonstrated expected changes in measured oxygen saturation and pulmonary artery pressures over time. At follow-up of 0.5 to 15.5 months, there were no significant differences between pulmonary artery pressures or oxygen saturation values transmitted from the device and simultaneous measurement with balloon flotation catheters. Four of the pulmonary artery leads dislodged and three demonstrated sensor drift, whereas two of the oxygen saturation sensors failed. Four patients died and four received transplants. Pathological study did not demonstrate injury to the right ventricular outflow tract or pulmonic valve. CONCLUSIONS: Chronic measurement of hemodynamic parameters in the outpatient setting with implantable sensor technology appears to be feasible. The devices are well tolerated without significant untoward effects, and the sensors generally function well over time, providing reliable information. Clinical usefulness remains to be established.     

Biochemical identification of transmembrane segments of the Ca(2+)-ATPase of sarcoplasmic reticulum

The transmembrane segments of sarcoplasmic reticulum Ca(2+)-ATPase were determined by trypsinization of cytoplasmic side-out intact sarcoplasmic reticulum vesicles. The membrane portion of tryptic digest comprising the transmembrane fragments, joined by the intravesicular segments, was separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis after labeling with fluorescein 5-maleimide in the presence of sodium dodecyl sulfate. In this way, seven fluorescent bands of tryptic fragments below 11 kDa were observed which were derived from 4 pairs of membrane spanning segments and one hydrophobic sequence at the C-terminal end. Two peptides of 10.8 and 10.6 kDa had the identical N-terminal sequence beginning at Glu826, representing the transmembrane segments M7 and M8 and their connecting loop. A band at 8.1 kDa contained one peptide beginning at Tyr36 (M1/loop/M2). A 7.7-kDa peptide starting at Leu253 (M3/loop/M4) and a 7.3-kDa peptide beginning at Ala752 (M5/loop/M6) were also observed. A band at 6.7 kDa contained two peptides, one beginning at Ser48 (M1/loop/M2) and another beginning at Tyr763 (M5/loop/M6). In addition, a 4-kDa peptide beginning at Met925 was observed. The size of this peptide did not allow for a complete pair of transmembrane segments, but this peptide could have been derived from trypsinolysis between the last pair of membrane spanning segments. These data therefore provide biochemical evidence for at least 8 transmembrane segments and perhaps two more at the C-terminal end of the enzyme.     

A new efficient method for one‐pot conversions of aryl carboxylic acids into nitriles without solvent

A new efficient method for synthesising nitriles, important organic reagents, is reported in this paper. In an environmentally benign solvent‐free system, aryl carboxylic acids were converted into the corresponding nitriles via one‐pot reactions, by amidation with ethyl carbamate followed by dehydration with thionyl chloride, in excellent yields. The results showed that the method has the advantages of lower cost, higher yield, less pollution and greater ease of work‐up. Copyright © 2008 Society of Chemical Industry     

Properties of nanoporous organosilicate hybrid thin films with a bimodal pore size distribution

Low dielectric poly[methylsilsesquioxane‐ran‐trifluoropropylsilsesquioxane‐ran‐(2,4,6,8‐tetramethyl‐2,4,6,8‐tetraethylenecyclotetrasiloxane)silsesquioxane]s {P[M‐ran‐TFP‐ran‐(TCS)]SSQs} having various compositions were synthesized using trifluoropropyl trimethoxysilane, methyl trimethoxysilane and 2,4,6,8‐tetramethyl‐2,4,6,8‐tetra(trimethoxysilylethyl)cyclotetrasiloxane. The chemical composition of the polymers and the content of SiOH end‐groups were controlled by adjusting the reaction conditions, and they were characterized by ¹H‐NMR. The thermally decomposable trifluoropropyl groups on the P[M‐ran‐TFP‐ran‐(TCS)]SSQ backbone and heptakis(2,3,6‐tri‐O‐methyl)‐β‐cyclodextrin (CD) were employed as pore generators. The dielectric constants of the porous CD/P[M‐ran‐TFP‐ran‐(TCS)]SSQ films were in the range 2.0–2.7 (at 100 kHz) depending on the concentration of the porogens, and showed no change over 4 days under aqueous conditions. The pore size of the films showed a bimodal distribution, with diameters of ca 0.5–1.0 nm for those originating from the trifluoropropyl groups and 1.7 nm from the CD. The elastic modulus and hardness of the 30 vol% CD‐blended film with a dielectric constant of 2.26 were 2.40 and 0.38 GPa, respectively, as determined by a nanoindenter. Copyright © 2005 Society of Chemical Industry     

用于实时数据传输的滑动帧方法及其实现

根据某雷达系统对测量信号的快速传输要求,提出采用滑动帧的处理方法并在FPGA中实现,克服了传统帧处理难以满足快速传输要求的不足。阐述了滑动帧结构的构造思想,详述了滑动帧结构的特点及具体功能模块的实现。根据实际应用需求构造了滑动帧结构处理器,试验和应用结果表明设计可行有效,能充分满足实时数据传输的要求。     

Phase transition of LCP fluids confined in nanochannels through MD simulation

Manipulation of molecular orientation alignment in MCTLCPs (main-chain thermotropic liquid crystalline polymers) by pure shear at nano scale has been investigated for the first time using molecular dynamics (MD) simulation. Results indicate that high planar shear induces long-range uniform orientation ordering (liquid crystalline phase) of initially randomly orientated molecules of MCTLCP fluid confined in a nanochannel, which is confirmed by analyzing the orientation order parameter and the snapshots of MCTLCP liquid in a nanochannel under different shear rates. Insights into the origin of the phase transition phenomena are given at molecular level through investigating the thermodynamic density distribution of MCTLCP molecules in the nanochannel, suggesting that the energy shift due to a radical jump of system density affects both the magnitude and the orientation of the molecular ordering. Simulation results also show that there is a critical shear rate for transforming isotropic phase into liquid crystalline phase. The critical shear rate is dependent on the temperature of the MCTLCP system. Findings in this paper may present useful information for processing TLCP molecules at nano scale and the understanding of nanoflow.     

Investigation on Single-Mode–Multimode– Single-Mode Fiber Structure

This paper presents an investigation on a single-mode-multimode-single-mode fiber structure. A one-way guided-mode propagation analysis for the circular symmetry waveguide is employed to model the light propagation and the approximated formulations are derived and evaluated concerning the accuracy. Phase conjunction of the multimode interference within the fiber structure is revealed. A simple way to predict and analyze the spectral response of the structure is presented through the space to wavelength mapping with the derived approximated formulations. The prediction of spectral response is verified numerically and experimentally.