Adoption of human metabolic processes as Data Quality Based Models

The Journal of Supercomputing - The buildup of huge data within business intelligence is essential because such data includes complete conceptual and technological stack in addition to raw and...     

The structure and photocatalytic performances of mechanically synthesized poly(3′,4′‐ethylenedioxy‐2,2′:5′,2″‐Terthiophene)/Zno composites

Poly(3′,4′‐ethylenedioxy‐2,2′:5′,2″‐terthiophene)/ZnO(poly(TET)/ZnO) composites with the ratio of poly(TET) and nano‐ZnO from 3:1 to 1:3 were synthesized by hand grinding and ball milling methods, respectively. The photocatalytic activities of the composites were examined through the degradation processes of methylene blue (MB) solution under UV light irradiation, and the possible mechanism for the photocatalytic activity enhancement by synergetic effects between nano‐ZnO and poly(TET) was proposed. The results showed that the strong interactions between the poly(TET) and nano‐ZnO occurred in the case of ball milling method. The results also proved that the crystallinity of ZnO was not disturbed in both of methods, and the nano‐ZnO was uniformly distributed in polymer matrix in the case of ball milling method. The comparative studies showed that the addition of the nano‐ZnO could enhance the photocatalytic activities of the composites. The highest degradation efficiency (100%) at 3 h under UV light irradiation occurred in the case of poly(TET)/ZnO(1:1) synthesized by ball milling method. Furthermore, the nanocompsosite displayed higher photocatalytic activity than nano‐ZnO, which was due to the holes (h⁺) transferring from the valence band of ZnO to the polymer backbone and the adsorption of MB molecules in polymer matrix via π–π conjugation between MB and aromatic regions of the poly(TET). POLYM. COMPOS., 36:1597–1605, 2015. © 2014 Society of Plastics Engineers     

渣浆泵双端面机械密封密封环热力耦合分析

针对磷酸厂渣浆泵机械密封因端面变形而导致的使用寿命缩短问题,以渣浆泵背对背型双端面机械密封密封环为研究对象,采用整体法,根据实际工况建立密封环热力耦合三维计算模型,研究密封环温度场分布及端面变形情况,分析不同工况下密封环热力变形对机械密封正常工作的影响.结果表明:密封环最高温度出现在静环内侧,且温度沿径向朝静环外侧逐渐...     

TH6350加工中心自动换刀运动动态仿真

以 I- DEAS.MS8三维工程软件为技术平台 ,完成了 TH6 35 0卧式加工中心的三维实体装配模型 ,实现了加工中心刀具从刀库到主轴的换刀机构建模和自动换刀运动动态仿真 ,为加工中心的换刀运动分析、运动规律优化和改进设计提供了先进快捷有效的方法     

槽区分布对T形槽液膜密封性能的影响

为研究槽区分布对密封性能的影响,以发散型T形槽液膜密封为研究对象,通过改变槽形区域位置,使其分布在动环外侧、中部及内侧,形成外槽形、中槽形和内槽形3种结构;建立其相应模型,对其液膜流场进行数值计算,讨论工况参数和槽形几何参数对3种槽形结构密封性能的影响。结果表明：槽区分布对密封性能有重大影响,同一条件下,外槽形拥有较强的流体动压特性和流体泵出效应,从而具有较大的开启力和较低的泄漏量,在3种槽形中密封性能最好;工况参数和槽形几何参数对3种槽形的开启力和泄漏量有较大影响,当膜厚取2～5μm,槽深取5～9μm,槽数取10～14个,发散角取32°～40°,可获得较好的密封性能。     

机械密封焊接金属波纹管随机振动响应及优化分析*

针对焊接式金属波纹管在工作中出现的随机振动问题,运用虚拟激励法理论,采用MATLAB编程得到波纹管在随机激励下轴向和径向时域下的信号;将时域信号利用快速傅里叶变换得到频域信号,并导入Workbench软件中进行随机振动分析;同时对波纹管的危险结构尺寸(波片厚度、焊箍半径和最小弯曲半径)进行响应面优化分析。结果表明:波纹管在受外界随机激励下的频率介于固有频率一阶和三阶之间;波纹管轴向最大响应变形发生在镶嵌静环的一端即自由端,径向最大响应变形发生在靠近波纹管的固定端的波片弧度较大处,随机激励时等效应力集中在靠近焊箍侧,这些位置在工作过程中最容易损坏,与实际工作中的破坏位置相吻合。通过响应面优化分析和自适应多目标优化,得到一组优化关键材料参数,使得波纹管的振动性能得到较大改善,降低了波纹管的损坏率,为焊接金属波纹管的结构参数设计提供理论参考。     

A facile solid-state heating method for preparation of poly(3,4-ethelenedioxythiophene)/ZnO nanocomposite and photocatalytic activity

Poly(3,4-ethylenedioxythiophene)/zinc oxide (PEDOT/ZnO) nanocomposites were prepared by a simple solid-state heating method, in which the content of ZnO was varied from 10 to 20 wt%. The structure and morphology of the composites were characterized by Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-vis) absorption spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM). The photocatalytic activities of the composites were investigated by the degradation of methylene blue (MB) dye in aqueous medium under UV light and natural sunlight irradiation. The FTIR, UV-vis, and XRD results showed that the composites were successfully synthesized, and there was a strong interaction between PEDOT and nano-ZnO. The TEM results suggested that the composites were a mixture of shale-like PEDOT and less aggregated nano-ZnO. The photocatalytic activity results indicated that the incorporation of ZnO nanoparticles in composites can enhance the photocatalytic efficiency of the composites under both UV light and natural sunlight irradiation, and the highest photocatalytic efficiency under UV light (98.7%) and natural sunlight (96.6%) after 5 h occurred in the PEDOT/15wt%ZnO nanocomposite.     

基于ADAMS的摇摆式输送机运动学与动力学分析

运用虚拟样机仿真分析软件ADAMS,建立了摇摆式输送机虚拟样机模型,对其进行了运动学和动力学动态仿真,在虚拟环境中较真实地模拟了系统的运动.对关键点进行运动学动力学分析,观察各部件的相互运动及产品主体的受力情况,为摇摆式输送机的改进设计和结构优化提供了理论依据.     

Rosenau-Burgers 方程的修正局部 Crank-Nicolson 格式

本文给出了 Rosenau-Burgers 方程的两种修正局部 Crank-Nicolson 格式．首先,求解原有的偏微分方程对空间方向进行有限差分离散而得到的常微分方程．其次,利用矩阵分裂技术对这个方程的指数系数矩阵分别按行和元素进行逼近．最后,利用修正局部 Crank-Nicolson 方法得到了两种格式．讨论了格式的稳定性、收敛性和先验误差估计．数值实验结果表明了理论证明的正确性及格式的有效性．该格式具有结构简单、精度高的优点．