Understanding TES microcalorimeter noise and energy resolution

We have performed numerical calculations of the noise in voltage-biased superconducting transition edge-based X-ray microcalorimeters, using a finite-element model. Details of the model are discussed, as well as results for different absorber geometries. The results are in agreement with an analytical model and show that the amount of internal thermal fluctuation noise can be reduced by using a segmented absorber. The simulation also agrees well with experimental data, which, for our detectors, contain no major unidentified noise sources. Furthermore, the discrepancy between the (small-signal) theoretical and the measured energy resolutions for 5.9 keV X-rays, for our sensors typically a factor of 2, is explained by a more accurate modelling of the sensor responsivity, taking into account the large signal behaviour.     

Crystal structure of tRNA-guanine transglycosylase: RNA modification by base exchange

tRNA-guanine transglycosylases (TGT) are enzymes involved in the modification of the anticodon of tRNAs specific for Asn, Asp, His and Tyr, leading to the replacement of guanine-34 at the wobble position by the hypermodified base queuine. In prokaryotes TGT catalyzes the exchange of guanine-34 with the queuine (.)precursor 7-aminomethyl-7-deazaguanine (preQ1). The crystal structure of TGT from Zymomonas mobilis was solved by multiple isomorphous replacement and refined to a crystallographic R-factor of 19% at 1.85 angstrom resolution. The structure consists of an irregular (beta/alpha)8-barrel with a tightly attached C-terminal zinc-containing subdomain. The packing of the subdomain against the barrel is mediated by an alpha-helix, located close to the C-terminus, which displaces the eighth helix of the barrel. The structure of TGT in complex with preQ1 suggests a binding mode for tRNA where the phosphate backbone interacts with the zinc subdomain and the U33G34U35 sequence is recognized by the barrel. This model for tRNA binding is consistent with a base exchange mechanism involving a covalent tRNA-enzyme intermediate. This structure is the first example of a (beta/alpha)-barrel protein interacting specifically with a nucleic acid.     

IPv6 delay and loss performance evolution

Although packet delay and loss are two important parameters of the Internet performance, to the best of our knowledge, the evolution of large‐scale IPv6 delay and loss performance has previously not been studied. In this paper, we analyze more than 600 end‐to‐end IPv6 paths between about 26 testboxes of RIPE Network Coordination Centre over two years, and compare the delay and loss performance over time with their IPv4 counterparts. We present and discuss the measurement methodologies and show that IPv6 paths have a higher delay and loss than their IPv4 counterparts. The main reason for the worse performance stems from IPv6‐in‐IPv4 tunnels rather than from native IPv6 paths and such tunnels are still widely used today. Copyright © 2007 John Wiley & Sons, Ltd.     

State multiplicity in CSTR-separator-recycle polymerisation systems

This article continues earlier work (Comput. Chem. Eng. 24 (2000) 209) concerning the design and control of isothermal reactor-separator-recycle systems. The multiplicity behaviour of six reaction systems of increasing complexity, from one-reactant, first-order reaction to chain-growth polymerisation, is investigated. Below a critical value of the plant Damkohler number, Da<Da^cr, the only steady state involves infinite flow rates. Feasible steady states become possible if the critical value is exceeded, Da>Da^cr. For one-reaction systems, one stable steady state is born at a transcritical bifurcation. For consecutive-reaction systems, including polymerisation, a fold bifurcation can lead to two feasible steady states. Moreover, the transcritical bifurcation is destroyed when two reactants are involved. If the gel-effect is included, a maximum of four steady states are possible. When multiple steady states exist, the achievable conversion is constrained by the instability of the low-conversion branch. This has practical importance for polymerisation systems when the radicals’ quasi-steady state assumption is not valid or the gel effect is significant.     

马铃薯淀粉的交联-聚合体化学修饰途径

The crosslink reaction is in fact from a commercial perspective the most reward ing reacting there is.It is used to adjust viscosity or rheology parameter in a large number of applications like p.e.the food or adhesives and textile printing.     

Laplace spectra as fingerprints for image recognition

In the area of image retrieval from data bases and for copyright protection of large image collections there is a growing demand for unique but easily computable fingerprints for images. These fingerprints can be used to quickly identify every image within a larger set of possibly similar images. This paper introduces a novel method to automatically obtain such fingerprints from an image. It is based on a reinterpretation of an image as a Riemannian manifold. This representation is feasible for gray value images and color images. We discuss the use of the spectrum of eigenvalues of different variants of the Laplace operator as a fingerprint and show the usability of this approach in several use cases. Contrary to existing works in this area we do not only use the discrete Laplacian, but also with a particular emphasis the underlying continuous operator. This allows better results in comparing the resulting spectra and deeper insights in the problems arising. We show how the well known discrete Laplacian is related to the continuous Laplace-Beltrami operator. Furthermore, we introduce the new concept of solid height functions to overcome some potential limitations of the method.     

Quantitative aspects of two methods to dissolve collagen-free muscle proteins from acetone dry powders of Guelders ring sausage

Summary The purpose of this study was to find experimental conditions for the complete solubility of collagen-free muscle proteins (CFMP) using acetone powder of Guelders ring sausage. Preliminary experiments were carried out to choose the best procedure for preparing the acetone dry powder. Two different methods of acetone extraction of minced sausage were compared. The acetone dry mass (ADM) method using continuous extraction in a Soxhlet [2] apparatus gave better results than the acetone powder (ACP) method, which used a blender [1]. The ADM method was used for further investigations. ADM was extracted with two types of sodium dodecyl sulphate (SDS), containing solvents A and B. Solvent A contains a Tris-boric acid buffer (pH 8.2) with 1.5% (m/v) SDS and 0.05% (m/v) dithioerythreitol [3]. Solvent B is a borate-chloric acid buffer (pH 9.0) with 2.0% (m/v) SDS and 1.0% (m/v) mercapto-ethanol [2]. Both solvents showed a linear relationship between the quantities of CFMP in ADM and the dissolved CFMP. The linear relationships were found between quantities of 10.0 and 30.0 mg (solution A) and of 5.0 and 30.0 mg ADM (solution B) per ml solvent. The solubility of CFMP was better in solvent B than in solution A. Completely dissolved CFMP from ADM was only obtained in the case of 5.0 mg ADM in 1.0 ml solution B. These conditions will be used in liquid chromatography experiments, the results of which will be reported later.

---

Quantitative Aspekte zweier Verfahren für das Auflösen kollagenfreier Muskelproteine aus acetontrockenen Pulvern der Gelderschen Rauchwurst

Zusammenfassung Der Zweck dieser Untersuchungen ist, die experimentellen Bedingungen für die vollstän-dige Löslichkeit des kollagenfreien Muskelproteins (CFMP) aus dem Acetonpulver der Gelderschen Rauchwurst zu finden. Durch Vorversuche wurde die beste Arbeitsweise für das Zubereiten des Acetonpulvers gewählt. Zwei verschiedene Extraktionsverfahren mit zerkleinertem Wurstmaterial wurden miteinander verglichen. Die Methode mit der Acetontrockenmasse (ADM) mittels kontinuierlicher Extraktion [2] führte zu besseren Ergebnissen als die Methode mit Acetonpulver (ACP), wozu ein Mischgerät [1] verwendet wurde. Die ADM-Methode wurde für weitere Untersuchungen angewendet. ADM wurde mit zwei verschiedenen Extraktionslösungen von Natrium-Dodecylsulfat (SDS) (A und B) extrahiert. Lösung A enthalt einen Tris-Borsäure Puffer (pH 8,2) mit SDS (1,5%) und Dithioerithritol (0,05%) [3]. Die Lösung B enthält einen Borat-Salzsäure Puffer (pH 9,0) mit SDS (2,0%) und Mercapto-Ethanol (1,0%) [2]. Beide Extraktionslösungen zeigen ein lineares Verhalten zwischen den Mengen vom CFMP in ADM und in aufgelöstem CFMP. Diese Linearität wurde von 10,030,0 mg ADM (Lösungsmittel A) und von 5,030,0 mg ADM (Lösungsmittel B) gefunden. Die Lös-lichkeit in Lösung B ist gegeniiber Lösung A besser. Ein vollständig gelöstes CFMP aus ADM wurde nur bei der Extraktion von 5,0 mg ADM in 1,0 ml der Losung B erhalten. Diese Bedingung soll in unseren künftigen flüssigchromatographischen Experimenten verwendet werden.

---

---

Supported by a grant from the Hoofdinspectie Levensmiddelen of the Ministry of Welzijn, Volksgezondheid en Cultuur     

聚乙烯与聚丙烯单组分复合材料研究进展

综述了聚乙烯、聚丙烯单组分复合材料的发展概况及最新研究动态。介绍了熔融膜压法、粉末浸渍法、溶液浸渍法三类制备聚乙烯单组分复合材料的传统方法。重点介绍了热压法、共挤出热压法两类制备单组分复合材料的创新方法。分析了各制备方法的优缺点:熔融法、粉末法与溶液法效率均较低且复合材料中纤维含量较少,力学性能不佳;热压法由于初始材料为100％纤维,从而综合效率较高,力学性能良好,缺点为加工温度过于苛刻;共挤出热压法效率较高,在具有高的增强相含量的同时拥有较宽的加工温度范围,缺点为增强相强度需进一步提高。最后介绍了单组分复合材料的应用并对其研究与应用前景作了展望。     

Contributions to the Ohmic Drop in the Electrolysis of ZnCl2 in a Molten Chloride Electrolyte

The electrowinning of zinc from zinc chloride with a molten chloride electrolyte was investigated. The electrolysis of zinc chloride shows ohmic limitations. The energy consumption is to a large extent determined by the anodic reaction, the evolution of chlorine. The chlorine gas plume was visualised in a see-through furnace and images were analysed to determine the plume angle. This parameter serves as an input parameter for a model to determine the ohmic contributions of the electrolyte, the plume and a layer of chlorine bubbles sticking to the anode, as well as the plume velocity. The results indicate that the major contribution (60%) to the ohmic drop is due to a stagnant layer of bubbles growing and sticking to the anode, thereby decreasing the effective anode area by coverage. The plume velocity influences coverage characteristics to some extent, which influences the ohmic drop.     

Synthesis and properties of aminopropyl nucleic acids

Oligonucleotides that contain up to three aminopropyl nucleoside analogues have been synthesized. Dimers of aminopropyl adenine and thymidine were prepared and used as building blocks by applying phosphoramidite chemistry. Both R and S isomers of the aminopropyl nucleosides were used. This incorporation led to a reduction of thermal stability of double-stranded DNA. Furthermore, the (R)-adenine analogue, which yielded (S)-APNA, can be considered as a candidate for universal base pairing.