Dewatered alum sludge: a potential adsorbent for phosphorus removal.

Alum sludge refers to the by-product from the processing of drinking water in water treatment works. In this study, groups of batch experiments were designed to identify the characteristics of dewatered alum sludge for phosphorus adsorption. Air-dried alum sludge (moisture content 10.2%), which was collected from a water treatment works in Dublin, was subjected to artificial P-rich wastewater adsorption tests using KH2PO4 as a model P source. Adsorption behaviours were investigated as a function of amount and particle size of alum sludge, pH of solution and adsorption time. The results have shown that pH plays a major role not only in the adsorption process but also in the adsorption capacity. With regard to adsorption capacity, this study reveals the Langmuir adsorption isotherm being the best fit with experimental data (R2 = 0.98-0.99). The maximum adsorption capacities range from 0.7 to 3.5 mg-P/g when the pH of the synthetic P solution was varied from 9.0 to 4.3, accordingly. The outcome of this study indicated that alum sludge is suitable for use as an adsorbent for removal of phosphate from wastewater.     

Indoor body-area channel model for narrowband communications

Using wireless sensors placed on a person to continuously monitor health information is a promising new application. At the same time, new low-power wireless standards such as Bluetooth and Zigbee have been proposed for short range, low data-rate communication matching the requirements of these bio-medical applications. However, there are currently few measurements or models describing propagation around the body. To address this problem, electromagnetic waves near the torso are measured and a statistical model is derived for communication in the 915 MHz and 2.45 GHz industrial, scientific and medical bands associated with Zigbee and Bluetooth. Measurement setup and statistical analysis are described.     

A chemical method for preparation of cobalt oxide thin films

A very simple method has been developed for the preparation of cobalt oxides, CoO(OH) and Co₃O₄, thin films on glass substrates using cobalt(II) chloride and ammonia as reacting agents. These materials were characterized by optical and electrical measurements. CoO(OH) films are insulating and have DC dielectric breakdown at about 3700 V / mm when measurements are made using silver print electrodes placed at various spacings on the film. Electrical resistivity of Co₃O₄ is 2.5 ω m. Analysis of the absorption spectra shows that CoO(OH) and CO₃O₄ have optical band gaps of 2.36 eV and 1.65 eV respectively. Spectral variation of the optical constants of these materials have also been measured.     

An on-line learning algorithm for the orthogonal weight estimation of MLP

We propose an on-line learning algorithm for Multi Layered Perceptrons (MLP) with an Orthogonal Weight Estimator (OWE) architecture. Such an architecture allows to dynamically and efficiently estimate the weights of a MLP in context dependent behaviour problems. The proposed learning algorithm attempts to solve the problem of time-consuming in the learning phase encountered to train these weight estimators.     

Second-Order optical non-linearities of {4-(dimethylamino) stilben z & e 4'-yl} dimesityl borane

Samples of {4-(dimethylamino) stilben Z & E 4'-yl} dimesityl borane (BNS) were synthesised and investigated for their non-linear optical properties. The results show that the quadratic hyperpolarisability of the Z-isomer is smaller than that of the E-isomer, the beta value found for the latter being as high as 60 × 10^?30 esu.     

Kinetics of intermetallic compound growth between nickel,electroless, Ni-P,electroless Ni-B and tin at 453 to 493 K

The growth kinetics, crystal structure, and morphology of the intermetallic compounds formed between nickel, electroless Ni-P and electroless Ni-B coatings with tin at 453 to 493 K for times up to 506 h have been determined by microscopical and X-ray diffraction techniques. The compound Ni₃Sn₄ was formed. All kinetics followed as parabolic law with activation energies of 128.0, 130.4, and 122.3 kJ mol^–1 for the Ni/Sn, Ni-P/Sn and Ni-B/Sn systems, respectively. The rate of growth of Ni₃Sn₄ in the Ni/Sn and Ni-P/Sn systems were similar but the rate of growth in the Ni-B/Sn system was five times faster. Pores occurred in the intermetallic compound formed in the Ni-P/Sn system and these are discussed in relation to the density of the phases.     

DWT-based high-capacity blind video watermarking, invariant to geometrical attacks

The paper describes a high-capacity blind video watermarking system invariant to geometrical attacks such as shift, rotation, scaling and cropping. A spatial domain reference watermark is used to obtain invariance to geometric attacks by employing image registration techniques to determine and invert the attacks. A second, high-capacity watermark, which carries the data payload, is embedded in the wavelet domain according to a human visual system model. This is protected by a state-of-the-art error correction code (turbo code). For a false detection probability of 10/sup -8/, the proposed system is invariant to scaling up to 180%, rotation up to 70/spl deg/, and arbitrary aspect ratio changes up to 200% on both axes. Furthermore, the system is virtually invariant to any shifting, cropping, or combined shifting and cropping. The system is also robust to MPEG2 compression, even when combined with shifting and cropping.     

Strategic planning for bioanalytical automation: managing growth successfully

Bioanalytical automation expanded at Glaxo Inc. from 1987 to 1991 by cycling through periods of justification, planning, implementation, obstacle-jumping and success, which justified continued cycling. In 1990 it became evident that the technology and its growth needed to be planned and the resources had to be managed. A Strategic Plan was researched and prepared. The plan describes the mission, values, goals and structure of the Bioanalytical Automation Group and the most important requirements for achieving those planned goals, including: (1) Long-term management commitment; (2) Trained, dedicated personnel; (3) Quality facilities; (4) Teamwork; and (5) Investment in automationcompatible equipment. The strategic plan has been in effect for over a year; current status, history, and the future are discussed in this article.