A highly transparent and thermally stable copolymer of 1‐adamantyl methacrylate and styrene

Thermal and optical properties of copolymers of 1‐adamantyl methacrylate (AdMA) and styrene (St) prepared by free radical polymerization in the bulk are investigated. The copolymer forms an azeotrope when the composition is AdMA/St = 55/45 mol%. The glass transition temperature and decomposition temperature of the azeotropic copolymer are 170 and ca 340 °C, respectively. The refractive index increases nonlinearly with St content from 1.522 to 1.591. The light scattering loss at 633 nm is 28.1 dB km^?1, which is less than half of that of polystyrene. The total optical loss including molecular vibrational absorption, which is evaluated using a copolymer‐based optical fiber, is 292–645 dB km^?1 at 500–700 nm. These values correspond to transmittances of 86–93% for a 1 m optical path length. © 2014 Society of Chemical Industry     

Hydroliquefaction of low-sulfur coals using iron carbonyl complexes—Sulfur as catalysts

Hydroliquefaction of low-sulfur Australian coals (Wandoan and Yallourn) was studied using iron carbonyl complexes as catalyst. The addition of Fe(CO)₅ (2.8 wt% Fe of coal) increased coal conversion from 48.6 to 85.2% for Wandoan coal, and from 36.7 to 69.7% for Yallourn coal in 1-methylnaphthalene at 425°C under an initial hydrogen pressure of 50 kg cm^?2. When molecular sulfur was added to iron carbonyls (Fe(CO)₅, Fe₂(CO)₉ and Fe₃(CO)₁₂), higher coal converions ( > 92%) and higher oil yields (>46%) were obtained, along with an increase in the amount of hydrogen transferred to coal from the gas phase (0.2 to 2.8%, d.a.f. coal basis). In the liquefaction studies using a hydrogen donor solvent, tetralin, Fe(CO)₅S catalyst increased the amount of hydrogen absorbed from the gaseous phase and decreased the amount of naphthalene dehydrogenated from tetralin. The direct hydrogen transfer reaction from molecular hydrogen to coal fragment radicals seems to be a major reaction pathway. Organic sulfur compounds, dimethyldisulfide and benzothiophene, and inorganic FeS₂ and NiS were found to be good sulfur sources to Fe(CO)₅. From X-ray diffraction analyses of liquefaction residues, it is concluded that Fe(CO)₅ was converted into pyrrhotite (Fe_1?xS) when sulfur was present, but into Fe₃O₄ in the absence of sulfur.     

Precise rendering method for exact anti-aliasing and highlighting

This paper introduces the Precise Rendering Method, which generates accurately anti-aliased and highlighted images from tessellated polygons. The Precise Rendering Method first solves the aliasing problems of hidden surface removal by using the Cross Scanline Algorithm. This algorithm can exactly calculate polygon areas projected onto each pixel by using horizontal and vertical scanlines. Aliasing artifacts in shading are then prevented by the Reflection Intergration Method, which analytically integrates the intensity of reflection in the solid angle defined by surface normals at vertices of the projected area. Several synthesized images are created to show the efficiency of the Precise Rendering Method.     

Partial oxidation of ethane to synthesis gas over Co-loaded catalysts

Attention has been increasingly paid to the partial oxidation of lower alkanes to synthesis gas, due to its intrinsic energy saving process. We studied the partial oxidation of ethane (POE) on Co loaded on various supports. The POE performance varied as follows: Y₂O₃, CeO₂, ZrO₂, La₂O₃  SiO₂, Al₂O₃, TiO₂ > MgO. Comparing Y₂O₃ and CeO₂, the carbon deposition during the POE was negligible on CeO₂ and therefore CeO₂ was the most preferable support. By changing space velocity and O₂ partial pressure, reaction mechanism of POE was studied and it was revealed that two-step mechanism was prevailing; combustion of ethane to H₂O and CO₂ and subsequent reforming of ethane with H₂O and CO₂ to synthesis gas. Co/CeO₂ catalyst exhibited high and stable catalytic activity for 10 h; high ethane conversion of 18% (maximum ethane conversion 20% at O₂/C₂H₆ = 0.2) with H₂ and CO selectivities of 93 and 84%, respectively.     

Two-stage pyrolysis of heavy oils. 3. Pyrolysis of tar-sand bitumens. Relation between ethylene yield and structural characteristics of heavy oils

Thermal cracking of tar-sand bitumens has been carried out using a two-stage pyrolysis reactor with temperature zones of 440°C and 750–800°C, respectively. Feedstocks were pyrolysed in the first stage into cracked oils, which were carried to the second stage for subsequent pyrolysis. Only 12–14 wt% of ethylene was obtained from tar-sand bitumens at the residence time of 1.2 s in the second stage, although 27 and 16 wt% were obtained from Taching and Iranian heavy vacuum residues, respectively. The tar-sand bitumens contain shorter paraffinic straight-chains and have more branched molecules than the vacuum residues of petroleum. A straight-chain paraffin index is proposed, with which a good correlation was obtained between ethylene yield and the fraction of straight-chain paraffin carbons in the heavy oil.     

Preparation of zinc ferrite in the presence of carbon material and its application to hot-gas cleaning

In order to develop an efficient absorbent of H₂S in coal gasification, zinc ferrite (ZnFe₂O₄) was prepared in the presence of carbon materials such as activated carbon (AC), activated carbon fiber (ACF), and Yallourn coal (YL). The absorption behavior of absorbents for H₂S was examined using a fixed-bed flow type reactor equipped with a quadrupole mass spectrometer.Carbon material-supported ZnFe₂O₄ exhibited larger desulfurization capacity for H₂S than unsupported ferrites. They could efficiently remove H₂S from 4000 ppm levels in a simulated coal gasification gas to less than 1 ppm at 500 °C. The absorption capacity of H₂S with ZnFe₂O₄/AC, ZnFe₂O₄/ACF, and ZnFe₂O₄/YL exhibited nearly 100% of stoichiometric amount of loaded metal species. They could be regenerated by an air oxidation in O₂-Ar (50 vol%) at 450 °C for 30 min. The regenerated ferrite can be used for repeated absorption of H₂S with a very slight decrease in the absorption capacity.     

Development of flexible displays using back‐channel‐etched In–Sn–Zn–O thin‐film transistors and air‐stable inverted organic light‐emitting diodes

We developed flexible displays using back‐channel‐etched In–Sn–Zn–O (ITZO) thin‐film transistors (TFTs) and air‐stable inverted organic light‐emitting diodes (iOLEDs). The TFTs fabricated on a polyimide film exhibited high mobility (32.9 cm²/Vs) and stability by utilization of a solution‐processed organic passivation layer. ITZO was also used as an electron injection layer (EIL) in the iOLEDs instead of conventional air‐sensitive materials. The iOLED with ITZO as an EIL exhibited higher efficiency and a lower driving voltage than that of conventional iOLEDs. Our approach of the simultaneous formation of ITZO film as both of a channel layer in TFTs and of an EIL in iOLEDs offers simple fabrication process.     

Fabrication of 5.8‐in. OTFT‐driven flexible color AMOLED display using dual protection scheme for organic semiconductor patterning

Abstract— A 5.8‐in. wide‐QQVGA flexible color active‐matrix organic light‐emitting‐diode (AMOLED) display consisting of organic thin‐film transistors (OTFTs) and phosphorescent OLEDs was fabricated on a plastic film. To reduce the operating voltage of the OTFTs, Ta₂O₅ with a high dielectric constant was employed as a gate insulator. Pentacene was used for the semiconductor layer of the OTFTs. This layer was patterned by photolithography and dry‐etched using a dual protection layer of poly p‐xylylene and SiO₂ film. Uniform transistor performance was achieved in the OTFT backplane with QQVGA pixels. The RGB emission layers of the pixels were formed by vacuum deposition of phosphorescent small molecules. The resulting display could clearly show color moving images even when it was bent and operated at a low driving voltage (below 15 V).     

Detection of the Object Velocity Using Doubly-scattered Dynamic Speckles Under Gaussian Beam Illumination

Abstract

The dynamic properties of doubly-scattered speckles produced at the image plane have been investigated using a scattering model that consists of a coherent Gaussian beam, a cascade of two moving diffusers and a single imaging lens. Dependence of the fluctuation speed of time-varying image speckles on the velocities of the diffusers is found to change with the size of illuminating speckles and the width of the point-spread function of the imaging lens. When the point-spread function and the focal position satisfy certain conditions, three kinds of velocity information—the velocity of each diffuser, the average velocity of the diffusers and the velocity difference between the diffusers—can be obtained by measuring a temporal correlation length of the time-varying speckle intensity. Experimental results confirm the theoretical predictions.     

Partial Oxidation of Methane to Synthesis Gas Over Ru-Loaded Y2O3 Catalyst

Ru-loaded Y₂O₃ catalyst was investigated for the partial oxidation of methane to synthesis gas. Ru(0.5 wt%)/Y₂O₃ catalyst afforded a high CH₄ conversion of 27% at a CH₄:O₂ ratio of 5 to give nearly a 1:2 ratio of CO and H₂ with a selectivity of 75% at 873 K. Ru(0.5 wt%)/Y₂O₃ catalyst maintained high catalytic activity over 10 h in the partial oxidation of methane. Carbon deposition of the catalyst surface in the reaction of CH₄ was examined by thermogravimetric analyses, and it was found that no carbon deposition occurred on the Ru(0.5 wt%)/Y₂O₃ catalyst. The synthesis-gas production proceeded basically via a two-step reaction consisting of methane combustion to give H₂O and CO₂, followed by the reforming of methane from CO₂ and steam.