合成吡啶类化合物用催化剂的再生行为研究

对合成吡啶类化合物用的失活催化剂上的结焦物进行了元素分析 ,并着重对失活催化剂的再生行为进行了研究。得到了不同失活程度催化剂的再生曲线及相同失活程度、不同再生条件下的再生曲线。经回归求得了一简单的再生反应动力学经验方程式 ,其中反应级数为碳含量的 1.16 5级 ,活化能为 4 2 .5 72kJ/mol,计算值与实验值的平均相对误差为 6 .5 %。     

氩等离子体辐照反相乳液接枝改性涤纶织物的研究

首次提出了在等离子体辐照后再用反相乳液接枝改性涤纶织物的新方法,探讨了接枝颗粒特征以及织物各项物理力学性能.接枝织物的结构及性能的测试结果表明:接枝物的尺寸远小于纤维的直径,在提高织物吸湿性的同时,对织物透气性能和强力等无明显影响;实验也证实了乳液中未接枝单体可以再次聚合.     

ANALYSIS AND PROCESSING OF LMF－COSTAS STEPPED FREQUENCY RADAR SIGNAL

Linear Modulated Frequency (LMF) Costas Stepped Frequency Radar (SFR) signal is introduced. Its ambiguity function is derived and analyzed in detail and its feasibility is validated in theory. The scheme of the proposed signal processing is also presented. The results of theoretic analysis and simulation show that, by using the proposed signal and increasing the bandwidth of the total stepped frequency, the ambiguity sidelobe is well suppressed and the range-velocity coupling in the stepped frequency radar is also greatly weakened.     

Fuzzy estimation of feed-cutting force from current measurement-a case study on intelligent tool wear condition monitoring

It is very important to use a reliable and inexpensive sensor to obtain useful information about manufacturing processing, such as cutting force for monitoring automated machining. In this paper, the feed-cutting force is estimated using inexpensive current sensors installed on the ac servomotor of a computerized numerical control (CNC) turning center, with the results applied to the intelligent tool wear monitoring system. The mathematical model is used to disclose the implicit dependency of feed-cutting force on feed-motor current and feed speed. Afterwards, a neuro-fuzzy network is used to identify the cutting force with current measurement only. This hybrid math-fuzzy approach will reduce the modeling uncertainty and measurement cost. Finally, the estimated cutting force is applied in the tool-wear monitoring process. Successful experiments demonstrate robustness and effectiveness of the suggested method in the wide range of tool-wear monitoring applications.     

HDPE的耐磨蚀性与抗冲击性的研究

用自制的旋臂式磨蚀实验仪，研究了５种高密度聚乙烯和１种顺丁橡胶改性的高密度聚乙烯，在铁尾矿和铁精矿浆体中的耐磨蚀性。耐磨蚀性最差的是ＨＤＰＥ２２００Ｊ，耐磨蚀性较差的是ＨＤＰＥ６３００Ｍ；ＨＤＰＥ５０００ｓ，６０９８和２４８０的耐磨蚀性较好；ＨＤＰＥ／ｃｉｓ－ＢＲ的耐磨蚀性最好。     

有机纤维材料用软膜乳液阻燃剂的制备

采用甲醛、尿素、三聚氰胺、脒基脲磷酸盐为原料,以硼砂、硼酸、氨水为pH调节剂合成了保护胶;在保护胶存在下,以预乳化的丙烯酸酯混合单体于82-88℃共聚合成乳液,将其涂布于有机纤维材料,干燥后得软膜透明阻燃涂层。用其处理的涤棉布阻燃性能为:损毁长度68mm、续燃时间1s、阴燃时间3s、氧指数62、吸附干量287g/kg,处理的纸板的阻燃性能为:平均炭化长度77mm、平均续焰时间2s、平均续灼燃时间32s、吸附干量283g/kg。     

An improved generative adversarial network for translating clothes from the human body to tiled image

Neural Computing and Applications - Nowadays, purchasing the products similar to the styles of stars’ products has become a new trend in e-commerce platforms. Clothing transaction constitutes...     

μC／OS—Ⅲ在Cortex—M3处理器上的移植

为了将μC／OS-Ⅲ移植到Cortex—M3处理器上,选用RealView MDK作为软件开发平台,针对Cortex—M3处理器特性编写了移植所需的C语言和汇编语言源代码,并验证了移植的正确性。移植后的μC／OS-Ⅲ能够稳定运行于Cortex～M3处理器上。该移植对大部分Cortex—M3处理器具有通用性,对其他架构处理器的μC／OS-Ⅲ移植具有参考作用。     

多媒体教学中的问题与对策

随着计算机技术及多媒体技术的发展,多媒体在教学中的应用越来越广泛,多媒体有着传统教学媒体不具备的独特优势,但在实际教学中也有不足之处,在教学中必须根据实际情况灵活运用多媒体才能取得理想的教学效果。     

不同基质配比对银毛野牡丹扦插的影响

银毛野牡丹是优良的园林观赏性植物,但是繁殖有性结实率低。通过为期30天的扦插试验,对比不同基质（原土、草炭土、蛭石、珍珠岩）配比对银毛野牡丹插穗生长的影响,分析插穗生根时间、生根数目、最长根长、生根率、生长状态以及基质变化,找出适合其生长发育的优良基质,为银毛野牡丹的繁殖提供技术支撑。研究表明：试验组T8（原土：细沙：草炭土：蛭石：珍珠岩=1：1：2：1：1）的插穗生根率、最长根长、插穗长势为最佳,试验组T2（草炭土）效果次之,在条件有限的情况下可以作为备用方案以供生产所需。