Aluminum based reflective nanolens arrays to improve the effectiveness of ultraviolet inactivation of Escherichia coli O157:H7 and Listeria monocytogenes in water and a sucrose solution

Food Science and Biotechnology - Aluminum based reflective nanolens arrays were developed via a series of aluminum electropolishing and anodization steps with subsequent selective dissolution of...     

Preparation and characterization of mullite whisker reinforced ceramics made from coal fly ash

Ceramics with mullite whiskers were prepared from coal fly ash and Al₂O₃ raw materials, with AlF₃ used as an additive. The phase structures and microstructures of the ceramics were identified via X-ray diffraction and scanning electron microscopy, respectively. The results show that pickling of coal fly ash is an effective method for enhancing the flexural strength of ceramics. Sintering temperature and AlF₃ addition were also key factors influencing the creation of ideal ceramics. The ceramic made from pickled coal fly ash, 6?wt% AlF₃, and sintered at 1200?°C, exhibited the highest flexural strength of 59.1?MPa, and had a bulk density of 1.32?g/cm³ and porosity of 26.8%. The results show that ceramic materials made under these conditions are ideal candidates for manufacturing ceramic proppants for the exploitation of unconventional oil and gas resources.     

SUBSCRIPTION 2018

正Four issues per volume a year,CHINA’S REFRACTORIES is distributed worldwide by airspeed delivery at no extra cost to subscribers.     

博宁联合化疗治疗骨转移癌的疗效分析

目的 :分析单纯化疗与博守联合化疗对实体瘤骨转移引起疼痛治疗的效果。方法 :42例病人随机分为单纯化疗组和化疗联合博宁组 ,对疼痛缓解程度和活动能力改善等进行对照研究。结果 :化疗联合应用博宁组疼痛缓解率及肿瘤变化方面明显优于单纯联合化疗组 (P <0 .0 5 ) ,而在活动能力改善方面则无明显差别。结论 :博宁联合化疗治疗骨转移癌引起的疼痛效果优于单纯联合化疗     

合成己二腈反应技术研究——(Ⅴ)己二腈工业反应过程模拟与反应器改造

对己二腈工业反应器提出了两釜串联带回流的模型,通过模拟计算得出模型的级间返混系数 f=6的结论。该模型能较好地预测工业反应器中物料组分浓度变化和气、液两相的流动特性;指出了现工业反应器的鼓泡中和段体积偏小是造成己二酸浓度偏高的关键;提出了可以通过增加串连一个鼓泡预反应段的改造方案,能有效地降低己二酸的浓度,从7%降至4%左右,从而能较好地减缓腐蚀和结焦。     

Specification,Verification and Prototyping of an Optimized Compiler

This paper generalizes an algebraic method for the design of a correct compiler to tackle specification and verification of an optimized compiler. The main optimization issues of concern here include the use of existing contents of registers where possible and the identification of common expressions. A register table is introduced in the compiling specification predicates to map each register to an expression whose value is held by it. We define different kinds of predicates to specify compilation of programs, expressions and Boolean tests. A set of theorems relating to these predicates, acting as a correct compiling specification, are presented and an example proof within the refinement algebra of the programming language is given. Based on these theorems, a prototype compiler in Prolog is produced.     

掺钛蓝宝石激光晶体中夹杂物的分析

本文用大视场光学显微镜、电子探针观察和分析了掺钛蓝宝石激光晶体中夹杂物的形状、尺寸大小及元素组成，并提出消除和减少这些夹杂物的方法．     

海南福山凹陷地层可钻性及钻头选型

利用测井资料及室内实验建立的可钻性模型编制了计算机软件，用其建立了海南福山凹陷地层连续可钻性剖面，并推荐出钻头选型，和现场实钻情况相当的吻合，为钻头合理选型提供了依据。     

军用滑木箱的设计分析

介绍了按日本标准设计的横板式和国内竖板式军用滑木箱的结构设计参数，从木箱抗弯、抗静压及顶盖抗弯三方面对比了两种木箱的力学性能，分析了两种木箱的特点及适用范围。     

MRF: A Framework for Source and Destination Based Bandwidth Differentiation Service

In this paper, we shall generalize the concepts of fairness, TCP-friendliness and TCP-compatibility such that more source adaptation schemes can be designed to support diverse applications over the Internet. A simple but efficient framework, in the form of a monotonic response function (MRF), is proposed for the analysis and the design of memoryless window-based source adaptation protocols by using these concepts. We first derive a necessary and sufficient condition for step-wise convergence to the weighted fairness. It is then used to construct increase-decrease policies. The requirements of our increase-decrease policy are less conservative than those of the CYRF (Choose Your Response Function) that was proposed in . Our MRF is suitable for transmission control protocol (TCP) and user datagram protocol (UDP), and can be used to design TCP-friendly and multimedia-friendly source adaptation schemes. Meanwhile, our MRF can be applied to provide bandwidth differentiation service without any change to the router of the existing Internet.