Investigating the thermal-plasma processing of advanced materials

Due to several inherent advantages, plasma processing technology may become a very useful tool in the production of new materials. An increasing research effort based on experimental as well as theoretical investigations has been invested in this area for the synthesis of advanced materials. In describing the thermal-plasma processing technique, this article employs examples from research at the Plasma Processing Laboratory at the University of Idaho.     

Massive transformation and absolute stability

Under carefully chosen conditions, solidification theory may be applied to solid-state transformations, and this has been done here for composition-invariant diffusion transformations. The predictions of the modeling are compared with isovelocity experiments in two iron systems, Fe-7.29 wt pct Cr and Fe-3.1 wt pct Ni. The ferrite to austenite phase transformation is used to demonstrate that stabilization of a planar transformation front at absolute stability is the natural lower velocity limit for a composition-invariant (massive) transformation. The results of the model, which includes nonequilibrium effects, clearly show that steady-state plane-front growth leading to composition invariance can be obtained at various temperatures depending on the growth velocity. In the lower velocity range, at the limit of absolute stability (of the order of 10 μm/s in the systems studied), the transformation interface moves under conditions of local equilibrium, and the temperature corresponds to the lower solvus temperature. At higher velocity (of the order of the interface diffusion rate, which in these systems is of the order of cm/s), the transformation is predicted to proceed at temperatures close to T ₀. At even higher rates, atom attachment kinetic undercooling will decrease the transformation temperature with respect to T ₀. In some cases, this temperature might even drop below the lower solvus. This article is based on a presentation made at the symposium entitled “The Mechanisms of the Massive Transformation,” a part of the Fall 2000 TMS Meeting held October 16–19, 2000, in St. Louis, Missouri, under the auspices of the ASM Phase Transformations Committee.     

Head scatter modelling for irregular field shaping and beam intensity modulation

Scattered radiation from within the treatment head can contribute significant dose to all parts of a radiotherapy treatment field. A multileaf collimator may be used to create an arbitrarily shaped field, and may also be used, under dynamic control, to modulate the beam intensity over the field. This method of intensity modulation is effectively a superposition of a large number of fields which have the same beam direction, but different shapes, and some of these shapes may have unusually small dimensions, particularly in the direction of the leaf movement. Two models for predicting the head scatter under these conditions have been investigated. These are a first-order Compton scatter approximation from the flattening filter, and an empirical fit to measured data using an exponential function. The first model only considers scatter from the flattening filter and has been applied to field sizes between 2 cm by 2 cm and 10 cm by 10 cm, where agreements are all within 1%. However it is not satisfactory at larger field sizes where small scatter contributions, from scattering sources other than the flattening filter, are integrated over large areas. The second model uses measured data between 4 cm by 4 cm and 30 cm by 30 cm to optimize the exponential function and is used to calculate the head scatter contribution for all field sizes. In this case good agreement is achieved over the full field size range, and hence this is a more generally applicable model. Results are presented for static irregularly shaped fields and intensity modulated beams created using a Philips multileaf collimator.     

The Silicon Backplane Design for an LCOS Polarization-Insensitive Phase Hologram SLM

Polarization-insensitivity is achieved in a reflective spatial light modulator by laying a quarter-wave plate (QWP) at the incident wavelength directly over the mirror pixels of a silicon backplane, and forming a nematic Freedrickcz cell over the QWP to modulate the reflected phase. To achieve the highest drive voltage from the available silicon process, a switched voltage common front electrode design is described, with variable amplitude square wave drive to the pixels to maintain constant root-mean-square drive and minimize phase fluctuations during the dc balance refresh cycle. The silicon has been fabricated and liquid-crystal-on-silicon cells both with and without the QWP assembled; applications include optically transparent switches for optical networks, beam steering for add-drop multiplexers for wavelength-division-multiplexing telecommunications, television multicast, and holographic projection.     

Evaluation of the recombinant 38-kilodalton antigen of Mycobacterium tuberculosis as a potential immunodiagnostic reagent

The diagnosis of infection caused by Mycobacterium tuberculosis is of increased public health concern following increases in the number of cases in developed countries and major increases in developing countries associated with the spread of human immunodeficiency virus (HIV) infection. The specificity of purified protein derivative skin testing for the detection of infection is compromised by exposure to environmental mycobacteria. Examination of sputum detects the most infectious patients, but not those with extrapulmonary disease. The 38-kDa antigen of M. tuberculosis contains two M. tuberculosis-specific B-cell epitopes. We overexpressed the gene for this antigen in Escherichia coli and evaluated the recombinant product in in vitro assays of T-cell function and as a target for the antibody response in humans. The sensitivity and specificity of the antigen as a skin test reagent were also assessed in outbred guinea pigs. We found that 69% of healthy sensitized humans recognize the antigen in vitro, as manifested by both cell proliferation and the production of gamma interferon. Untreated patients initially have a lower frequency of response (38%); this recovers to 72% during therapy. A total of 292 patients (20 with HIV coinfection) and 58 controls were examined for production of antibody to the 38-kDa antigen by using a commercially available kit. The sensitivity of the test in comparison with that of culture was 72.6%, and the specificity was 94.9%. The antigen was also tested for its ability to induce skin reactions in outbred guinea pigs sensitized by various mycobacterial species. The antigen provoked significant skin reactions in M. tuberculosis-, M. bovis BCG-, and M. intracellulare-sensitized animals. The significance of these findings and the usefulness of this antigen in immunodiagnosis are discussed.     

Structural studies of the putative O-specific polysaccharide of Acinetobacter baumannii O2 containing 3,6-dideoxy-3-N-(D-3-hydroxybutyryl)amino-D-galactose

A polysaccharide containing D-galactose, 2-deoxy-2-N-acetylamino-D-galactose and 3,6-dideoxy-3-N-(D-3-hydroxybutyryl)amino-D-galactose, probably corresponding to the lipopolysaccharide side chain, was obtained from an aqueous phenol extract of isolated cell walls from Acinetobacter baumannii strain O2. By means of NMR studies and chemical degradations, the repeating unit of the polymer was identified as a branched hexasaccharide of the structure shown, where Fuc3N represents 3-amino-3,6-dideoxygalactose and R represents D-3-hydroxybutyryl. Serological tests indicated that the polymer corresponded to the O2 antigen.     

SED88: a Pascal program for the analysis of sedimentation equilibrium data

Analytical ultracentrifugation is commonly used for the determination of molecular weights (sedimentation equilibrium) and sedimentation coefficients (sedimentation rate) of biological macromolecules in solution. A Turbo Pascal program for the analysis of sedimentation equilibrium centrifugation data produced by absorbance optical systems is described. The user may enter data from a scan of absorbance versus distance from the centre of rotation, via a graphics tablet (or ASCII file). This is subsequently manipulated to yield an apparent weight average molecular weight for the given sample. Plots of ln (absorbance) versus (radius2) may also be produced. The method described uses readily available computational equipment requiring only a graphics tablet in addition to an IBM PC compatible computer. This technique and the software developed have been used to investigate the molecular weight range of two International Humic Substances Society (IHSS) reference samples from the Suwannee River.