Effects of post annealing on removal of defect states in silicon oxynitride films grown by oxidation of silicon substrates nitrided in inductively coupled nitrogen plasma

Ultra thin (5 nm) silicon oxynitride (SiON) films were fabricated at a low temperature using nitrogen plasma generated by an inductively coupled plasma system. Effects of post-metalization annealing (PMA) of Al/SiON/Si MOS structure on the electrical properties of the SiON films were studied and correlations between the charge trapping states and the leakage current were established. Positive charge trapping by interface states generated by plasma damage was characterized by the hysteresis in high-frequency capacitance-voltage (C-V) characteristics. Hysteresis was observed to be completely removed by PMA while interface state density at the Si mid band gap reduced from 2.2×10¹³ to 3.7×10¹¹/eV/cm² and the oxide fixed charge density changed from 3.3×10¹² to −4×10¹¹/cm². The leakage current also decreased significantly, by more than two orders of magnitude, with PMA. The analysis of the leakage current using trap assisted tunneling (TAT) mechanism indicated that with PMA, the trap energy level in the SiON film becomes shallower from 1.3 to 0.7 eV. The positive trapped charges were observed to be annihilated by PMA and the trapping sites became neutral trap centers in the SiON film. This could lead to the reduction in the leakage current component given rise to by TAT.     

High performance liquid chromatographic separation of diacylglycerol acetates to quantitate disaturated species of lung phosphatidylcholine

A high-performance liquid chromatographic (HPLC) separation of diacylglycerol acetates to quantitatite disaturated species of lung phosphatidylcholine (PC) was studied. The diacylglycerol acetates were applied on a reversed phase column, eluted by an isocratic solvent, acetonitrile/isopropanol/water (35:15:1, v/v/v) at a flow rate of 1 ml/min, and detected by differential refractometry (RI). This isocratic HPLC method was useful to separate disaturated species from the others of lung PC. The quantitative analysis of the molecular species separated by HPLC was studied by RI detection. Chroamtograms obtained by RI detection and radioactivity determination of diacylglycerol [³H]acetates prepared by [³H]acetic anhydride were almost identical. The RI detector responsed in the same degree for different, authentic standards of diacylglycerol acetates. The detection limit with RI detection was about 30 nmoles. Molecular species of PCs from human lung and carcinoma tissues were analyzed by this HPLC method. The contents of disaturated species were very similar to those reported previously. These results indicate that RI detection is very useful in the nmole range for the quantitative analysis among the molecular species containing disaturated species.     

Transmittance and cathodoluminescence of AlN ceramics sintered with Ca3Al2O6 as sintering additive

Aluminum nitride ceramics were prepared by sintering with 0–4.8 mass% of Ca₃Al₂O₆ (C₃A) as a sintering additive. The transmittance in the range of 260–550 nm increased with increasing amount of C₃A. The cathodoluminescence intensity attributed to oxygen-induced defects decreased with increasing amount of C₃A. From the results, the increase of the transmittance in the range of 260–550 nm was considered to be related to the decrease of the oxygen-induced defect density.     

Ulcerative colitis with skip lesions at the mouth of the appendix: a clinical study

OBJECTIVE: We examined the clinical characteristics of ulcerative colitis patients who demonstrated endoscopically discontinuous lesions at the mouth of the appendix. METHODS: Of patients with initial or recurrent active ulcerative colitis who underwent total colonoscopy during the past 3 yr at Osaka City General Hospital, we selected those who had skip lesions in the mouth of the appendix before treatment, and examined their gender, age, disease type, sites of lesions, inflammatory reaction, severity of disease, effects of treatment, and posttreatment course. RESULTS: Discontinuous lesions at the mouth of the appendix were found in 10 patients, who had the following common clinical features: the major lesion was usually present in the lower part of the large bowel including the rectum, many of the patients had suffered an initial attack only, all patients had mild disease, and many of the patients responded quite satisfactorily to treatment with salicylazosulfapyridine. CONCLUSION: Numerous patients with ulcerative colitis with discontinuous lesions at the mouth of the appendix were observed and their clinical characteristics were examined. Determination of the clinical significance of skip lesions in the appendix will contribute to elucidation of the pathogenesis of ulcerative colitis.     

On the modelling of scalar and mass transport in combustor flows

The results of a numerical study of swirling and non-swirling combustor flows with and without density variations are presented. Constant-density arguments are used to justify closure assumptions invoked for the transport equations for turbulent momentum and scalar fluxes, which are written in terms of density-weighted variables. Comparisons are carried out with measurements obtained from three different axisymmetric model combustors. The three experiments cover recirculating flow, swirling flow and variable-density, swirling flow inside model combustors. Together, they offer wide ranging flow conditions to test the validity of the models. Results show that the Reynolds stress/flux models do a credible job of predicting constant-density, swirling and non-swirling combustor flows with passive scalar transport. However, their improvements over algebraic stress/flux models are marginal. The extension of the constant-density models to variable-density flow calculations shows that the models are equally valid for such flows. Therefore, the present results argue well for the adoption of constant-density models for variable-density flows until a successfully validated variable-density model is available.     

Effects of brefeldin-A on Golgi morphology in human cultured fibroblasts observed in three-dimensional stereo scanning electron microscopy

Brefeldin A (BFA) has been reported to cause disassembly of the Golgi. We have used three-dimensional (3-D) high-resolution scanning electron microscopy (HRSEM) to investigate these effects in human skin fibroblast cells. The spontaneous reassembly during prolonged exposure to BFA and some effects of forskolin were observed. A BFA concentration of 5μg/ml caused Golgi complexes to become vesicular, resulting in a progressive decrease in the size of the Golgi. Morphologic changes were visible within 2 min of BFA incubation, and by 30 min no identifiable Golgi could be found. Spontaneous reassembly of the Golgi apparatus upon the removal of the BFA or with continued long-term exposure with BFA could not be confirmed. Preliminary experiments with forskolin were not effective in reversing or inhibiting the effects of BFA in human fibroblast cells grown in culture. This inability for spontaneous reassembly and nonreversal by forskolin may reflect a differential effect of BFA in various cell types. HRSEM has proven to be useful for observing 3-D morphologic effects of BFA in Golgi.     

Photodegradation mechanism and stabilization of polyphenylene oxide and rigid‐rod polymers

Poly(2,4‐dimethyl‐1,4‐phenylene oxide) (PPO), poly(benzo[1,2‐d:5,4‐d′]bisoxazole‐2,6‐diyl‐1,4‐phenylene) (PBO) and poly(benzo[1,2‐d:4,5‐d′]bisthiazole‐2,6‐diyl‐1,4‐phenylene) (PBZT), which are polymers with extended conjugated structures, undergo a self‐sensitized photo‐induced electron‐transfer reaction. A second component is not required. This article presents many similar observations on these polymers when they are exposed to light and evidence to support the proposed photo‐induced electron‐transfer mechanism. Methods to stabilize these polymers against photo‐oxidation are also described. Workers investigating other conjugated polymeric systems may find the experimental methods, observations and polymer stabilization approaches discussed in this review useful. Copyright © 2005 Society of Chemical Industry