Electrosprayed and selenized Cu/In metal particle films

Nano-particulate copper and indium metal layers of 1-2 μm have been deposited by non-vacuum techniques such as doctor blade, screen printing and electrospray using alcoholic suspension pastes. Electrospray showed a high efficiency of material usage and yielded the most uniform morphology. The metal precursor layers were subjected to a thermal treatment (500-600 °C) in selenium vapor to convert the porous metal layers into CuInSe₂ compound layers. The chemical conversion, investigated by X-ray diffraction, showed the presence of the In₂O₃ impurity phase in the precursor as well as in the selenized layers.     

Slip Control System for a Deep-Sea Mining Machine

Tracked vehicles capable of locomotion in the deep sea are used for manganese nodule mining. This requires specific technical solutions in various respects. Locomotion in the soft sea bed is one of them. For the Crawler to safely maneuver, an automatic drive mode with slip control of the driving tracks is essential. Based on experimental studies at IKS, University of Siegen, slip control for the NIOT-IKS mining machine has been developed and implemented. The experimental setup for the development of the slip control along with the logic of the automatic driving mode is described. The system is critically discussed and the test results and future work are briefly outlined. Note to Practitioners-The work is carried out as part of the polymetallic nodule mining program of the Government of India. The technique of slip control is a specific requirement for a tracked vehicle used in the deep sea. Slip is common in many vehicles-tracked and otherwise. Examples are steam engines in the early days and ordinary cars while negotiating slush or snow/ice and dozers working in soft soil. While these are manually controlled by drivers who have firsthand knowledge of the environmental conditions, in the case of a mining machine in deep sea, it has to be completely automatic and, hence, is challenging. The knowledge generated in this work could be effectively used by practitioners in other related areas of automobile engineering for updating their expertise. Also, similar techniques may be used for maneuvering vehicles sent to other planets     

Stabilization techniques for spectral methods

We introduce a stabilized treatment of spectral methods. The condition number of the spectral systems is highly improved. Elliptic and biharmonic problems are considered. Suitable interpolants in the case of inhomogeneous Dirichlet boundary conditions are presented. For a direct solver the improvements with respect to rounding error propagation are numerically demonstrated.     

Guidelines for management of left-sided prosthetic valve thrombosis: a role for thrombolytic therapy. Consensus Conference on Prosthetic Valve Thrombosis

OBJECTIVES: We sought to form a consensus recommendation for management of prosthetic valve thrombosis (PVT) from previous case and uncontrolled reports from a consensus of international specialists. BACKGROUND: PVT and thromboembolism relate to inadequate anticoagulation and valve type and location. PVT is suspected by history (dyspnea) and auscultation (muffled valve sounds or new murmurs) and confirmed by Doppler echocardiography showing a marked valve gradient. METHODS: A consensus conference was held to recommend management of left-sided PVT. RESULTS: Transesophageal Doppler echocardiography is used to visualize abnormal leaflet motion and the size, location and mobility of thrombus. Thrombolysis is used for high risk surgical candidates with left-sided PVT (New York Heart Association functional class III or IV) because cerebral thromboembolism may occur in 12% of patients. Duration of thrombolysis depends on resolution of pressure gradients and valve areas to near normal by Doppler echocardiography performed every few hours. Lysis is stopped after 72 or 24 h if there is no hemodynamic improvement (operation indicated). Heparin infusion with frequent measurement of activated partial thromboplastin time (aPTT) begins when aPTT is more than twice control levels and can be converted to warfarin (international normalized ratio [INR] 2.5 to 3.5) plus aspirin (81 to 100 mg/day). Patients in functional class I or II have lower surgical mortality, and those with large immobile thrombi on the prosthetic valve or left atrium have responded to endogenous lysis with combined subcutaneous heparin every 12 h (aPTT 55 to 80 s) plus warfarin (INR 2.5 to 3.5) for 1 to 6 months. Operation is advised for nonresponders or patients with mobile thrombi. CONCLUSIONS: Thrombolysis, followed by heparin, warfarin and aspirin, is advised for high risk surgical candidates with left-sided PVT.     

Phase I trial of inhaled natural interleukin 2 for treatment of pulmonary malignancy: toxicity, pharmacokinetics, and biological effects

Safety, local and systemic immunomodulation, and tumor response to treatment with aerosolized natural interleukin 2 (nIL-2) applied five times a day were studied in a Phase I trial in 16 patients with pulmonary malignancies refractory to conventional therapy. The toxicity of inhaled nIL-2 was different from that observed after systemic administration. Reversible airway irritation causing a nonproductive cough represented the dose-limiting toxicity. Mild to moderate reduction of the vital capacity and forced expiratory volume (FEV1) with minor effects on relative FEV1, peak expiratory flow, airway resistance, and PaO2 was experienced by individual patients. In 14 patients suffering from pulmonary metastases due to renal cell cancer, one durable complete response, one partial response, and one mixed response were observed. Inhalation of nIL-2 aerosol resulted in a dose-dependent expansion of pulmonary immunocompetent cells in bronchoalveolar lavage fluid. Posttreatment bronchoalveolar lavage showed an activated lymphocyte phenotype with increased HLA-DR expression. The only systemic biological effect detectable in peripheral blood was a marked increase of soluble interleukin 2 receptor serum levels. We conclude that treatment with aerosolized nIL-2 is an effective means for site-specific immunomodulation and deserves further investigation for the treatment of malignant and inflammatory lung disease.     

Purification and characterization of an endopeptidase from Lactobacillus delbrueckii subsp. bulgaricus B14

An intracellular endopeptidase was purified from cell-free extracts of Lactobacillus delbrueckii subsp. bulgaricus B14 by anion exchange chromatography on DEAE-Sepharose, hydroxyapatite chromatography, second anion exchange chromatography on Mono-Q, and metal-chelating affinity chromatography. The endopeptidase was a monomer with a molecular mass of approximately 70 kDa determined by SDS-PAGE and gel filtration. Various oligopeptides (e.g. Met-enkephalin, bradykinin) were hydrolysed by the endopeptidase. Exopeptidase activity and cleavage of dipeptides or tripeptides was not observed. The K_M value for the cleavage of Metenkephalin was 1.2 mM. Temperature and pH optima were 47 °C and pH 7.7, respectively. The endopeptidase was inhibited by the classical agents for metal-dependent (EDTA) and serine (DFP) enzymes. Activity was increased by Co²⁺ and Mg²⁺, no effect was observed with Ca²⁺. After inhibition with EDTA, enzyme activity could be restored fully by Co²⁺. Activity was inhibited by Zn²⁺, Mn²⁺, Fe²⁺, Cu²⁺, Cd²⁺ and Hg²⁺. The N-terminal sequence of the endopeptidase was determined as: H₂N-Val-Arg-Gly-Gly-Ser-Gly-Asp-Thr-Thr-Val-0H.     

Small thermophotovoltaic prototype systems

In an earlier paper we reported on a small grid-connected thermophotovoltaic (TPV) system consisting of an ytterbia mantle emitter and silicon solar cells with 16% efficiency (under solar irradiance in standard test conditions, STCs). The emitter was heated up using a butane burner with a rated thermal power of 1.35 kW (referring to the lower heating value). This system produced an electrical output of 15 W, which corresponds to a thermal to electric (direct current) conversion efficiency of 1.1%. In the interim, further progress has been made, and significantly higher efficiencies have been achieved. The most important development steps are: (1) the infrared radiation-absorbing water filter between emitter and silicon cells (to protect the cells against overheating and against contact with flue gasses) has been replaced by a suitable glass tube. By doing this, it has been possible to prevent losses of convertible radiation in water. (2) Cell cooling has been significantly improved, in order to reduce cell temperature, and therefore increase conversion efficiency. (3) The shape of the emitter has been changed from spherical to a quasi-cylindrical geometry, in order to obtain a more homogeneous irradiation of the cells. (4) The metallic burner tube, on which the ytterbia emitter was fixed in the initial prototypes, has been replaced by a heat-resistant metallic rod, carrying ceramic discs as emitter holders. This has prevented the oxidation and clogging of the perforated burner tube. (5) Larger reflectors have been used to reduce losses in useful infrared radiation. (6) Smaller cells have been used, to reduce electrical series resistance losses. Applying all these improvements to the basic 1.35 kW prototype, we attained a system efficiency of 1.5%. By using preheated air for combustion (at approximately 370 °C), 1.8% was achieved. In a subsequent step, a photocell generator was constructed, consisting of high-efficiency silicon cells (21% STC efficiency). In this generator, the spaces between the cells were minimized, in order to achieve as high an active cell area as possible, while simultaneously reducing radiation losses. This new system has produced an electrical output of 48 W, corresponding to a system efficiency of 2.4%. This is the highest-ever-reported value in a silicon-cell-based TPV system using ytterbia mantle emitters. An efficiency of 2.8% was achieved by using preheated air (at approximately 500 °C). An electronic control unit (fabricated of components with low power consumption, and including a battery store) was developed, in order to make the TPV system self-powered. This unit controls the magnetic gas supply valve between gas supply cylinder and burner as well as the high-voltage ignition electrodes. Both the control unit’s own power consumption and the battery-charging power are supplied directly by the TPV generator. A small commercial inverter is used to transfer excess power to the 230 V grid.     

Parallel reduced area multipliers

As developed by Wallace and Dadda, a method for high-speed, parallel multiplication is to generate a matrix of partial products and then reduce the partial products to two numbers whose sum is equal to the final product. The resulting two numbers are then summed using a fast carry-propagate adder. This paper presents Reduced Area multipliers, which employ a modified reduction scheme that results in fewer components and less interconnect overhead than either Wallace or Dadda multipliers. This reduction scheme is especially useful for pipelined multipliers, because it minimizes the number of latches required in the reduction of the partial products. The reduction scheme can be applied to either unsigned (sign-magnitude) or two's complement numbers. Equations are given for determining the number of components and a method is presented for estimating the interconnect overhead for Wallace, Dadda, and Reduced Area multipliers. Area estimates indicate that for non-pipelined multipliers, the reduction in area achieved with Reduced Area multipliers ranges from 3.7 to 6.6 percent relative to Dadda multipliers, and from 3.8 to 8.4 percent relative to Wallace multipliers. For fully pipelined multipliers, the reduction in area ranges from 15.1 to 33.6 percent relative to Dadda multipliers, and from 2.9 to 9.0 percent relative to Wallace multipliers.