生物矿化法制备氧化镓颗粒及其性能表征

以蚕丝蛋白为模板,在相对温和的条件下通过生物矿化的手段形成具有特殊形貌的α-GaOOH颗粒,并通过在不同温度下煅烧α-GaOOH得到α-Ga2O3和β-Ga2O3.采用扫描电镜(SEM)、透射电镜(TEM)、X射线衍射仪(XRD)和荧光分光光度计(PL)等手段研究了丝素蛋白多肽和矿化时间对颗粒的影响,对其生物矿化机理进行了初步探讨.结果表明,所制备的β-Ga2O3具有优良的发光特性,丝素蛋白多肽模板以无定形的结构与产物结合在一起,并且经过高温烧结后仍以碳膜的形式包覆在材料的表面.这种碳膜结构对于提高材料的生物学性能起着重要的作用.     

PVC树脂生产中产生塑化片的原因与改进措施

分析了PVC树脂生产中产生塑化片的原因,针对储槽搅拌器、离心机、星形下料器和输送管线提出了改进措施,并在料仓底部下料管线处增加了振动筛,改造后效果良好.     

Feasibility study of large-scale mass customization 3D printing framework system with a case study on Nanjing Happy Valley East Gate

At present, the development and implementation of digital transformation are the keys to promoting high-quality industry development. The new digital fabrication method of robotic 3D printing is a research area being studied by many to tackle the issue of the declining productivity of traditional construction methods. Although many studies have been done, most of the current 3D printing projects are facing limitations in terms of scale. In order to bridge the gap, this article proposed a mass customization 3D printing framework system for large-scale projects. This article discusses how mass customization is made possible through the joint operation of the FUROBOT software and 3D printing hardware. By taking the east gate of Nanjing Happy Valley Plaza as a case study, the article demonstrates and studies the feasibility of the large-scale mass customization 3D printing framework system.     

大庆地区防洪工程管理初探

大庆地区防洪工程运行至今已有五十余年,分析在管理中的一些弊端,研究在今后的工作中应采取的措施和需要完善的问题,对充分发挥工程效益起到了重要作用。     

退休后爱上南瓜

退休后,我在老家宅后开垦出一块菜园,种上南瓜。原本就图个休闲、乐趣,没想到种上南瓜后,我竟迷上了南瓜,且以普普通通的南瓜为食材、药材,做起了南瓜保健文章。老伴经常牙疼,一疼起来就吃不下饭、喝不下水。我把南瓜根和猪肉一起煮,然后切片给他吃,只吃了两顿,牙疼就治好了。邻居刘婶的公公患有牛皮癣,治了大半辈子也没治好,我掐来几片鲜嫩的南瓜叶子,直接在牛皮癣上擦,擦了一周左右时间,折磨了他大半辈子的牛皮癣就治好了。我的小孙女娇娇患有     

Amination of biochar surface from watermelon peel for toxic chromium removal enhancement

Watermelon peel residues were used to produce a new biochar by dehydration method. The new biochar has undergone two methods of chemical modification and the effect of this chemical modification on its ability to adsorb Cr(VI) ions from aqueous solution has been investigated. Three biochars, Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, were made from watermelon peel via dehydration with 50% sulfuric acid to give Melon-B followed by oxidation with ozone and amination using ammonium hydroxide to give Melon-BO-NH_2 or Triethylenetetramine(TETA) to give Melon-BO-TETA. The prepared biochars were characterized by BET, BJH,SEM, FT-IR, TGA, DSC and EDAX analyses. The highest removal percentage of Cr(VI) ions was 69% for Melon-B,98% for Melon-BO-NH_2 and 99% for Melon-BO-TETA biochars of 100 mg·L~(-1) Cr(VI) ions initial concentration and 1.0 g·L~(-1) adsorbents dose. The unmodified biochar(Melon-B) and modified biochars(Melon-BO-NH_2 and Melon-BO-TETA) had maximum adsorption capacities(Qm) of 72.46, 123.46, and 333.33 mg·g~(-1), respectively.The amination of biochar reduced the pore size of modified biochar, whereas the surface area was enhanced.The obtained data of isotherm models were tested using different error function equations. The Freundlich,Tempkin and Langmuir isotherm models were best fitted to the experimental data of Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, respectively. The adsorption rate was primarily controlled by pseudo-second–order rate model. Conclusively, the functional groups interactions are important for adsorption mechanisms and expected to control the adsorption process. The adsorption for the Melon-B, Melon-BO-NH_2 and Melon-BO-TETA could be explained for acid–base interaction and hydrogen bonding interaction.     

长距离供热管线穿越行洪区的设计方案探讨

随着城市建设规模的不断发展,为满足不断增长的城市供热需求并全面落实国家生态保护、清洁供暖、可持续发展等政策,减少城市环境治理的压力,城市供热热源逐步远离城市,形成许多以长距离供暖和大规模供热为特征的长距离供热管线.由于热源和城市的位置关系,长距离供热管线往往会穿越复杂的障碍区域.以富拉尔基发电厂向齐齐哈尔市长距离供热管网项目穿越行洪区段管网作为案例,从管线穿越障碍区域设计、防洪设计及施工便道设计三个方面对供热管网穿越行洪区时的难点进行分析总结.     

信息化教学设计的误区和应对策略

本文归纳了目前教师在信息化教学设计中所存在的误区,在对其进行原因剖析的基础上,为一线教师提出了避免误区的应对策略,以期为教师信息化教学设计和教学实施提供借鉴。