对交替工作式氧化沟几个技术问题的探讨

从交替工作式氧化沟处理城市污水实例的运行资料出发 ,并在着重分析COD ,SS的超标原因及影响因素的基础上 ,提出了达标排放改进技术及完善工艺建议。     

MPaaS: Mobility prediction as a service in telecom cloud

Mobile applications and services relying on mobility prediction have recently spurred lots of interest. In this paper, we propose mobility prediction based on cellular traces as an infrastructural level service of telecom cloud. Mobility Prediction as a Service (MPaaS) embeds mobility mining and forecasting algorithms into a cloud-based user location tracking framework. By empowering MPaaS, the hosted 3rd-party and value-added services can benefit from online mobility prediction. Particularly we took Mobility-aware Personalization and Predictive Resource Allocation as key features to elaborate how MPaaS drives new fashion of mobile cloud applications. Due to the randomness of human mobility patterns, mobility predicting remains a very challenging task in MPaaS research. Our preliminary study observed collective behavioral patterns (CBP) in mobility of crowds, and proposed a CBP-based mobility predictor. MPaaS system equips a hybrid predictor fusing both CBP-based scheme and Markov-based predictor to provide telecom cloud with large-scale mobility prediction capacity.     

原位模板法在铝基底上制备TiO2纳米管阵列薄膜

采用液相沉积法，将铝基多孔阳极氧化铝（AAO）模板浸入到（NH4）2TiF6溶液中，制备出高度有序的TiO2纳米管阵列薄膜，并在不同的温度下进行了热处理。用场发射扫描电子显微镜、透射电子显微镜和X射线衍射仪等手段对试样的微观形貌、结构及物相进行了表征。结果表明，TiO2纳米管的形貌依赖于AAO的特征，薄膜是由外径大约200nm，壁厚约40nm的TiO2纳米管阵列组成，薄膜厚度约25μm。原位模板法制备的TiO2纳米管阵列薄膜为非晶态，在400℃空气中焙烧2h转变为锐钛矿相TiO2。经过650℃焙烧仍保持纳米管结构，表现出较好的热稳定性。     

电脉冲孕育处理Al-22Si合金衰退性的研究

研究了电脉冲孕育处理后不同静置时间对Al-22Si合金凝固组织中初生相形态、大小、分布的影响。结果表明，电脉冲处理后立刻浇注对Al-22Si合金有较明显的变质作用，初生Si相形态由粗大板条状变为块状，其平均尺寸由153．15μm降至77．35μm，分布也较均匀；但电脉冲处理也存在着较明显的衰退性，即随着熔体静置时间的延长孕育效果逐渐消失，当静置时间为80min时，其组织形态与未经电脉冲处理的组织相似，其平均尺寸由77．35μm升至143．67μm。     

Effect of electric pulse treatment on solidification structure of an A1-15%Si alloy

The effect of electric pulse modifying on the solidification structure of an Al-15%Si alloy was investigated. The result shows that the primary silicon disappears sometimes and the eutectic phase is refined after the treatrnent of EP （electric pulse） though there are different modalities in different treating durations. DSC （differential scanning calorimetry） analysis indicates that the super-cooling texture decreases and the freezing range narrows evidently after the electric pulse treatment.     

电脉冲孕育处理对Al-5Cu合金热裂的影响

研究了不同电脉冲孕育处理参数对Al-5Cu合金热裂倾向的影响.结果表明,不同电脉冲孕育处理参数均可降低Al-5Cu合金的热裂倾向,处理后该合金热裂临界应力比未处理试样提高了约3倍.合金热裂倾向改善的原因是,电脉冲孕育处理细化了Al-5Cu合金组织,减少了共晶相的数量,缩短了合金凝固温度区间.     

高浓度香料香精废水处理工程设计

香料香精废水中含有苯、酚、醇、胺、醛类及脂类、油类等物质,硫酸盐含量高,水量、水质变化大。设计采用隔油—气浮—微电解—催化氧化预处理工艺,UASB—两级A/O生化工艺,混凝/沉淀—砂滤深度处理工艺。运行结果表明:当高浓度原水CODCr高达18 073 mg/L时,出水CODCr仍在100 mg/L以下,其他指标均达到《污水综合排放标准》(GB 8978—1996)一级标准。     

Synthesis and magnetic properties of CuFe2O4 nanotube arrays

CuFe2O4 nanotube arrays with different outer diameters were synthesized in anodic aluminum oxide templates through sol-gel techniques followed by heating treatment processes. The morphology of the nanotube arrays was investigated by field emission scanning electron microscope and transmission electron microscopy, suggesting that the nanotube arrays are ordered and uniform. The X-ray diffraction results indicate that the crystal structure of the nanotube arrays is polycrystalline with a spinel-type structure. The measurements of magnetic properties indicate that CuFe2O4 nanotube arrays with outer diameter of 200 nm exhibit magnetic anisotropy with easy magnetization direction along the axis of nanotubes.     

Casting structure of pure aluminum by electric pulse modification at different superheated temperatures

Electric pulse modification （EPM） is a novel technique that reduces grain size by altering the structure of a melt. It was investigated that the response of the casting structure of high pure aluminum to EPM in different superheated melts. The results indicate that the grain refining effect of a given pulse electric field holds an optimal temperature range, moreover, a lower or higher superheated temperature will both disadvantage the improvements of casting structure. It essentially lies in the cooperative action between the distorted absorption of clusters and the activated capability of atoms in the aluminum melt.