Structural health analysis on cyber physical system based on reliability

The Journal of Supercomputing - Cyber physical system (CPS) is consisting of two interdependent networks, i.e., a cyber network embedding into a physical network. Although interdependence makes the...     

Preparation and characterization of Fe‐Tetranitro phthalocyanine/polyurethane blends

In this article, Fe‐Tetranitro phthalocyanine (Fe‐TNPc)/polyurethane (PU) blends were prepared by solution blending. The mechanical properties of the samples were studied by tensile tests. The results showed that the tensile strength and the elongation at break of the samples increased with increasing Fe‐TNPc content. The improved mechanical properties for the samples containing Fe‐TNPc was attributed to the increased microphase separation degree of PU, which was further investigated by dynamic mechanical analysis (DMA) and Fourier transform infrared analysis. The lower T_g of the soft segments and the higher T_g of the hard segments for the samples containing Fe‐TNPc indicated an increase of microphase separation degree of PU. The increased hydrogen bonded carbonyl groups in the samples with increasing Fe‐TNPc content also proved the conclusion. Quantitative evaluation of the interaction between Fe‐TNPc and PU was also investigated by analyzing the physical crosslinking density of the samples. The results indicated that the physical crosslinking density of the samples increased with increasing Fe‐TNPc content. The antibacterial properties of the samples were investigated. The results showed that the percentage bacterial inactivation toward S. aureus and E. coli of the samples were 98.9% and 90.9%, respectively, when Fe‐TNPc was added to 1%. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41284.     

小像元红外探测器读出电路设计研究

介绍了基于SMIC 0.18 μm 3.3 V工艺设计研究的第一款小像元红外探测器读出电路,间距10 μm,规模1024×1024。文章详细介绍了像素输入级以及列级、输出级运放的设计,为提高线性摆伏,设计选用了低阈值NMOS管nmvt 33,仿真分析证明低阈值管nmvt 33的噪声性能优于普通管n 33；版图设计对关键信号线和敏感点采取隔离处理措施,对像元间串扰进行了仿真分析,有效控制了信号串扰。电路经测试使用各项功能正常,最大电荷处理能力达到4.3 Me-,动态范围≥65 dB,读出速率达到10 MHz,性能指标满足设计要求。     

Pretreatment of Highly Polluted Pharmaceutical Waste Broth by Wet Air Oxidation

The preoxidation of a highly polluted waste pharmaceutical fermentation broth using wet air oxidation (WAO) has been studied as a possible method for the effective removal of organics. The applied (pre)treatment method should enhance the biotreatability of the pharmaceutical fermentation broth in terms of reduced initial toxicity and higher biodegradability. Preliminary experiments in the pilot biological treatment plant were successful only at low organic loads, whereas the system collapses at higher ones. The characterization of the fermentation broth was started by common physicochemical analysis, whereas several bioassays were used to determine its impact on biological treatment plants and the environment. Toxicity prior to and after WAO was determined using the acute Vibrio fischeri test, measurement of inhibition of O2 consumption, and the Daphnia magna acute test. Ready biodegradability of the treated and untreated broth has also been assessed. WAO experiments were accomplished in the 2?L batch reactor at different temperatures (240/280°C) and operating pressures. WAO experiments confirmed reduction of the toxicity toward microorganisms, whereas oxidized wastewater was more toxic to daphnids. Biodegradability of the oxidized broth has also been enhanced. Further work has been focused on designing appropriate combination of WAO and biological processes.     

基于STEP的零件加工工艺计划模型

为了满足ＣＩＭＳ环境下工艺系统与其它系统集成的需要，建立了标准工艺计划模型具十分重要的意义。本文描述了一个基于ＳＴＥＰ的零件加工工艺计划模型，介绍了建立这一模型的关键技术，给出了参照ＳＴＥＰ建立工艺计划模型的方法。     

Compressive deformation of semi-solid SiC_p/ZA27 composites

1　INTRODUCTIONTheapplicationofcastingSiCp/ZA2 7compositesisgreatlylimitedduetotheinhomogeneousdistribu tionofSiCpandtheporosityexistedinthematrix[1] .However,semi solidformingtechnology (SSF )e mergedintherecentyearscannotonlydecreaseore liminatetheporosityandenhancethecompactnessofthematrix ,butalsoimprovetheuniformdistributionofthereinforcementthroughtheredistributionofthereinforcementfromitsuniquecharacteristicsofmouldfilling[2 ] .Inaddition ,SSFisanearnet shapeform ingtechnology …     

无线移动自组网络的动态源路由策略

文章介绍无线移动自组网中动态源路由策略的路由发现和路由维护,并提出改进思路和今后研究的方向。     

灯泡贯流式机组发电机冷却装置技术改造方式的探讨

灯泡贯流式发电机组直径小,转速低,发电机的通风冷却是一个难点。通过对京南、马骝滩、石面坦及南津渡等水电站的发电机运行过程中出现的温升过高,定子线棒绝缘受损等问题的分析,提出了解决的措施与改进方案,并对灯泡贯流式机组冷却系统的设计提出了建议,可供参考和借鉴。     

一种测量天空亮度的新方法

本文介绍了一种测量天空亮度分布的新方法。这种方法利用视场角为180°的鱼眼镜头照相机和计算机数字图像处理系统,实现了天空亮度分布的瞬时测取和胶片密度的高效率处理。文中论述了胶片灰度与天空亮度的标定转换实验方法。引用了误差理论中的数据处理方法确定出二者间的函数关系。通过对昆明和重庆地区晴和阴天空下大量实测结果的误差处论和分析,得到了其相关系数和标准偏差的频数分布图,由此证明了这种方法的可靠性。     

Design of the broadband microstrip array antenna for blast furnace surface monitoring

Aiming at the requirements of high-resolution imaging and high integration of the blast furnace radar,this paper presents a method for designing a wideband microstrip array antenna,which broadens the antenna bandwidth through the design of parasitic patches and air layers.By combining multi-input multi-output (MIMO) radar and synthetic aperture radar (SAR) imaging principles,a linear MIMO array is designed,and a near-field simulation imaging experiment is performed on the simulated feed line through the wave number domain imaging algorithm.Simulation results show that the gain of the main lobe of the antenna can reach 14.05 dBi,the reflection coefficient is less than -10 dB,the absolute bandwidth is 5.25 GHz,the operating frequency is 20.67~25.92 GHz,and the range resolution is increased to 3 cm compared with the existing blast furnace radar.The average error of the azimuth direction of the simulated material line imaging is 0.008 m,and the range direction is 0.0011 m.Compared with the traditional microstrip array antenna,this antenna effectively widens the bandwidth,and the range resolution is higher than that of the traditional blast furnace radar.It can accurately obtain the shape information on the simulated material line,and has an engineering application value for blast furnace surface monitoring.