Surface Integrity Assessment Upon Electric Discharge Machining of Die Steel Using Non-Destructive Magnetic Barkhausen Noise Technique

Surface integrity characterization of manufactured component is very important as it significantly affects the in-service performance of the component. Till now, surface integrity was evaluated using conventional measurement technique like microhardness tester, X-ray diffraction, optical microscopy and surface roughness tester. But, this technique being laboratory based cannot be used for in-service monitoring of the surface integrity. The present study focuses on the characterization of surface integrity upon electric discharge machined sample using non-destructive magnetic Barkhausen noise technique. Electric discharge machining was performed in die-sinking mode on die steel using copper–tungsten electrode (negative polarity). Experiment was performed by selecting different levels of peak current, gap voltage and pulse on time. Surface integrity characteristics like microhardness change, residual stress, microstructural alteration and surface roughness were analysed using microhardness tester, X-ray diffraction, optical microscopy and surface roughness tester, respectively, and were then correlated with magnetic parameter like root mean square value and peak value obtained from Barkhausen noise signal. The results show a good correlation between magnetic parameter (RMS and Peak value) of Barkhausen noise with the microhardness and surface roughness of the machined sample.

     

Efficiency and effectiveness enhancement of an intercooler of two‐stage air compressor by low‐cost Al2O3/water nanofluids

The present study was aimed to utilize low‐cost alumina (Al₂O₃) nanoparticles for improving the heat transfer behavior in an intercooler of two‐stage air compressor. Experimental investigation was carried out with three different volume concentrations of 0.5%, 0.75%, and 1.0% Al₂O₃/water nanofluids to assess the performance of the intercooler, that is, counterflow heat exchanger at different loads. Thermal properties such as thermal conductivity and overall heat transfer coefficient of nanofluid increased substantially with increasing concentration of Al₂O₃ nanoparticles. Specific heat capacity of nanofluids were lower than base water. The intercooler performance parameters such as effectiveness and efficiency improved appreciably with the employment of nanofluid. The efficiency increased by about 6.1% with maximum concentration of nanofluid, that is, 1% at 3‐bar compressor load. It is concluded from the study that high concentration of Al₂O₃ nanoparticles dispersion in water would offer better heat transfer performance of the intercooler.     

Identification of critical erosion prone areas in the small agricultural watershed using USLE,GIS and remote sensing

In the present study, Karso watershed of Hazaribagh, Jharkhand State, India was divided into 200 × 200 grid cells and average annual sediment yields were estimated for each grid cell of the watershed to identify the critical erosion prone areas of watershed for prioritization purpose. Average annual sediment yield data on grid basis was estimated using Universal Soil Loss Equation (USLE). In general, a major limitation in the use of hydrological models has been their inability to handle the large amounts of input data that describe the heterogeneity of the natural system. Remote sensing (RS) technology provides the vital spatial and temporal information on some of these parameters. A recent and emerging technology represented by Geographic Information System (GIS) was used as the tool to generate, manipulate and spatially organize disparate data for sediment yield modeling. Thus, the Arc Info 7.2 GIS software and RS (ERDAS IMAGINE 8.4 image processing software) provided spatial input data to the erosion model, while the USLE was used to predict the spatial distribution of the sediment yield on grid basis. The deviation of estimated sediment yield from the observed values in the range of 1.37 to 13.85 percent indicates accurate estimation of sediment yield from the watershed.     

A study into the effects of personality type and methodology on cohesion in software engineering teams

The aim of the research described in this paper is to gain a qualitative understanding of how cohesiveness relates to personality type, performance and adherence to a particular software engineering methodology (XP). A variety of research methods were employed including ethnographic methods, questionnaires and interviews. An online personality test based on the Myers-Briggs Type Indicator (MBTI) was used to ascertain the personality types, and questionnaires were used throughout the project to measure levels of cohesiveness. Examples of how the teams worked together throughout the project are described, and whether and how this relates to the personality types of the individual members. The results indicate that certain teams were found to work consistently well over the project due to homogeneity in personality type and others were found to be very cohesive due to a mixture of types.     

Snowpack response in the Assiniboine-Red River basin associated with projected global warming of 1.0 °C to 3.0 °C

This study assesses snow response in the Assiniboine-Red River basin, located in the Lake Winnipeg watershed, due to anthropogenic climate change. We use a process-based distributed snow model driven by an ensemble of eight statistically downscaled global climate models (GCMs) to project future changes under policy-relevant global mean temperature (GMT) increases of 1.0 °C to 3.0 °C above the pre-industrial period. Results indicate that basin scale seasonal warmings generally exceed the GMT increases, with greater warming in winter months. The majority of GCMs project wetter winters and springs, and drier summers, while autumn could become either drier or wetter. An analysis of snow water equivalent (SWE) responses under GMT changes reveal higher correlations of snow cover duration (SCD), snowmelt rate, maximum SWE (SWE_max) and timing of SWE_max with winter and spring temperatures compared to precipitation, implying that these variables are predominantly temperature controlled. Consequently, under the GMT increases from 1.0 °C to 3.0 °C, the basin will experience successively shorter SCD, slower snowmelt, smaller monthly SWE and SWE_max, earlier SWE_max, and a transition from snow-dominated to rain-snow hybrid regime. Further, while the winter precipitation increases for some GCMs compensate the temperature-driven changes in SWE, the increases for most GCMs occur as rainfall, thus limiting the positive contribution to snow storage. Overall, this study provides a detailed diagnosis of the snow regime changes under the policy-relevant GMT changes, and a basis for further investigations on water quantity and quality changes.     

Performance Tuning and Reliability Analysis of the Electrostatically Configured Nanotube Tunnel FET with Impact of Interface Trap Charges

Silicon - This paper examines, an electrostatically configured Nano-Tube Tunnel Field-Effect Transistor (ED-NTTFET). During the fabrication process, different charges such as fixed charge, oxide...     

On the issue of urea phase connectivity in formulations based on molded flexible polyurethane foams

Lithium chloride was added to systematically alter the phase separation behavior, and hence, the nature of urea phase connectivity, in a series of plaques based on molded flexible polyurethane foam formulations. The plaques prepared were found to possess varied levels of urea phase connectivity that was examined at different length scales using several characterization techniques. SAXS, TEM, and t‐AFM were used to show that addition of LiCl systematically reduced the formation of the urea aggregate structures typically observed in flexible polyurethane foam formulations and thus led to a loss in urea phase connectivity at the macrolevel. SAXS, DSC, and DMA revealed that formulations with and without LiCl exhibited similar interdomain spacings and soft segment glass transitions, suggesting that incorporation of LiCl did not prevent the plaques from undergoing partial microphase separation. WAXS demonstrated that addition of LiCl led to a loss in the local ordering of the hard segments within the microdomains, i.e., it led to a reduction of microlevel connectivity or the regularity in segmental packing of the urea phase. High‐magnification t‐AFM images showed that increasing the LiCl content dispersed the urea component more homogeneously and in a more uniform manner in the polyol matrix, and thus altered the connectivity of the urea phase at the microdomain level. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2956–2967, 2002