Nanogrooved carbon microtubes for wet three‐dimensional printing of conductive composite structures

Recent advances in three‐dimensional (3D) printing have enabled the fabrication of interesting structures which are not achievable using traditional fabrication approaches. The 3D printing of carbon microtube composite inks allows fabrication of conductive structures for practical applications in soft robotics and tissue engineering. However, it is challenging to achieve 3D printed structures from solution‐based composite inks, which requires an additional process to solidify the ink. Here, we introduce a wet 3D printing technique which uses a coagulation bath to fabricate carbon microtube composite structures. We show that through a facile nanogrooving approach which introduces cavitation and channels on carbon microtubes, enhanced interfacial interactions with a chitosan polymer matrix are achieved. Consequently, the mechanical properties of the 3D printed composites improve when nanogrooved carbon microtubes are used, compared to untreated microtubes. We show that by carefully controlling the coagulation bath, extrusion pressure, printing distance and printed line distance, we can 3D print composite lattices which are composed of well‐defined and separated printed lines. The conductive composite 3D structures with highly customised design presented in this work provide a suitable platform for applications ranging from soft robotics to smart tissue engineering scaffolds. © 2019 Society of Chemical Industry     

Full AC analysis of value of DER to the grid and optimal DER scheduling

This paper presents part of the work ComEd and Quanta Technology have performed to quantify the locational and temporal value of DER to avoid distribution grid upgrade investments. It focuses on the formulation of a robust and efficient algorithm for DER optimal dispatch on a distribution feeder to mitigate the violation of current and voltage limits using the allocated cost of capacity and locational marginal value of real and reactive DER injection/withdrawal.     

Reconstruction of reflectance spectra using weighted principal component analysis

The weighted principal component analysis technique is employed for reconstruction of reflectance spectra of surface colors from the related tristimulus values. A dynamic eigenvector subspace based on applying certain weights to reflectance data of Munsell color chips has been formed for each particular sample and the color difference value between the target, and Munsell dataset is chosen as a criterion for determination of weighting factors. Implementation of this method enables one to increase the influence of samples which are closer to target on extracted principal eigenvectors and subsequently diminish the effect of those samples which benefit from higher amount of color difference. The performance of the suggested method is evaluated in spectral reflectance reconstruction of three different collections of colored samples by the use of the first three Munsell bases. The resulting spectra show considerable improvements in terms of root mean square error between the actual and reconstructed reflectance curves as well as CIELAB color difference under illuminant A in comparison to those obtained from the standard PCA method. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 360–371, 2008     

Precautious-RM: a predictable non-preemptive scheduling algorithm for harmonic tasks

A major requirement of many real-time embedded systems is to have time-predictable interaction with the environment. More specifically, they need fixed or small sampling and I/O delays, and they cannot cope with large delay jitters. Non-preemptive execution is a known method to reduce the latter delay; however, the corresponding scheduling problem is NP-Hard for periodic tasks. In this paper, we present Precautious-RM as a predictable linear-time online non-preemptive scheduling algorithm for harmonic tasks which can also deal with the former delay, namely sampling delay. We derive conditions of optimality of Precautious-RM and show that satisfying those conditions, tight bounds for best- and worst-case response times of the tasks can be calculated in polynomial-time. More importantly, response time jitter of the tasks is analyzed and it is proven that under specific conditions, each task has either one or two values for response time, which leads to improving the predictability of the system interaction with the environment. Simulation results demonstrate efficiency of Precautious-RM in increasing accuracy of control applications.     

Bioprinting a cell-laden matrix for bone regeneration: A focused review

Although many efforts have been made to regenerate the bone lesions, existing challenges can be mitigated through the development of tissue engineering scaffolds. However, the weak control on the microstructure of constructs, limitation in preparation of patient-specific and multilayered scaffolds, restriction in the fabrication of cell-laden matrixes, and challenges in preserving the drug/growth factors' efficacy in conventional methods have led to the development of bioprinting technology for regeneration of bone defects. So in this review, conventional 3D printers are classified, then the priority of the different types of bioprinting technologies for the preparation of the cell/growth factor-laden matrixes are focused. Besides, the bio-ink compositions, including polymeric/hybrid hydrogels and cell-based bio-inks are classified according to fundamental and recent studies. Herein, different effective parameters, such as viscosity, rheological properties, cross-linking methods, biodegradation biocompatibility, are considered. Finally, different types of cells and growth factors that can encapsulate in the bio-inks to promote bone repair are discussed, and both in vitro and in vivo achievement are considered. This review provides current and future perspectives of cell-laden bioprinting technologies. The restrictions and challenges are identified, and proper strategies for the development of cell-laden matrixes and high-performance printable bio-inks are proposed.     

A process model for robotic disc grinding

Automation of deburring and cleaning of castings is desirable for many reasons. The major reasons are dangerous working conditions, difficulties in finding workers for cleaning sections, and improved profitability. A suitable robot cell capable of using different tools, such as cup grinders, disc grinders and rotary files, is the solution. This robot should be completed with sensors in order to keep the quality of the cleaned surface at an acceptable level. Although using sensors simplifies both the programming and quality control there are still other problems that need to be solved. These involve selection of machining data, e.g. feeding rate and grinding force in a force controlled operation based on parameters such as tool type, disc grinder and geometry. In order to decrease the programming time, a process model for disc grinders has been developed. This article investigates this process model and pays attention to problems such as wavy or burned surfaces and the effect of a robot's repetition accuracy in the results obtained. Many aspects treated in this article are quite general, and can be applied in other types of grinding operations.     

A comprehensive survey of industry practice in real-time systems

Real-Time Systems - This paper presents results and observations from a survey of 120 industry practitioners in the field of real-time embedded systems. The survey provides insights into the...     

Interactive smart battery storage for a PV and wind hybrid energy management control based on conservative power theory

This paper presents interactive smart battery-based storage (BBS) for wind generator (WG) and photovoltaic (PV) systems. The BBS is composed of an asymmetric cascaded H-bridge multilevel inverter (ACMI) with staircase modulation. The structure is parallel to the WG and PV systems, allowing the ACMI to have a reduction in power losses compared to the usual solution for storage connected at the DC-link of the converter for WG or PV systems. Moreover, the BBS is embedded with a decision algorithm running real-time energy costs, plus a battery state-of-charge manager and power quality capabilities, making the described system in this paper very interactive, smart and multifunctional. The paper describes how BBS interacts with the WG and PV and how its performance is improved. Experimental results are presented showing the efficacy of this BBS for renewable energy applications.     

Interpolating meshes of boundary intersecting curves by subdivision surfaces

C ⁰ (creases) or C ¹ continuity across the interpolated curves.