Photocatalytic oxidation of low concentration 2,4-D solution with new TiO2 fiber catalyst in a continuous flow reactor.

Environmental pollution by low concentrations of 2,4-Dichlorophenoxyacetic acid (2,4-D) is a concern these days due to ever increasingly stringent regulations. Photocatalysis with immobilized TiO2 fiber is a promising oxidation method. Laboratory experiments on photocatalytic degradation of 0.045 mmol l(-1) 2,4-D with the world's first high-strength TiO2 fiber catalyst were carried out in a continuous flow reactor in which the degradations were, in general, similar to those with high 2,4-D concentrations investigated elsewhere. Degradation and mineralization of 2,4-D were significantly enhanced with no initial pH adjustments. The rate constants for total organic carbon (TOC) without pH adjustment were about two-fold bigger than the pH adjustment cases. CO2 gas measurement and carbon mass-balance were carried out for the first time, where about 34% organic carbon converted into CO2 gas during four-hour oxidation. 2,4-Dichlorophenol (2,4-DCP), phenol, benzyl alcohol and two unknowns (RT = 2.65 and 3.78 min.) were detected as aromatic intermediates while Phenol was the new aromatic in HPLC analysis. Dechlorination efficiencies were high (> 70%) in all the cases, and more than 90% efficiencies were observed in chloride mass balance. Bigger flow rates and solution temperature fixed at 20 degrees C without pH adjustment greatly enhanced 2,4-D mineralization. These results can be an important basis in applying the treatment method for dioxin-contaminated water and wastewater.     

Structure and Nonlinear Optical Properties of Lanthanide Borate Glasses

The third–order nonlinear optical susceptibility, χ⁽³⁾, of lanthanide (lanthanum, praseodymium, neodymium, and samarium) borate glasses has been measured by the third harmonic generation method. The structure of the present glass system has been studied by infrared and Raman spectroscopic methods. The network structures of the present Ln₂O₃–B₂O₃ glasses have been confirmed to be basically similar to each other. Praseodymium, neodymium, and samarium borate glasses exhibit χ⁽³⁾ values that are larger than lanthanum borate glasses, because of the optical resonance effect, in accordance with the f – f transition. Especially, the χ⁽³⁾ value for 30Pr₂O₃·70B₂O₃ glass is 1.8 × 10⁻¹² esu, which is a factor of ∼60 larger than that of SiO₂ glass. This striking enhancement of χ⁽³⁾ is mainly attributed to the large transition moment to the first excitation state.     

Slow eye movement as a possible predictor of reaction delays to auditory warning alarms in a drowsy state

In recently developed intelligent vehicles, warning alarms are often used to prompt avoidance behaviours from drivers facing imminent hazardous situations. However, when critical reaction delays to auditory stimulation are anticipated, the alarm should be activated earlier to compensate for such delays. It was found that reaction times to an auditory stimulus significantly increased in the presence of slow eye movement (SEM), which is known to occur frequently during the wake-sleep transition. The reaction delay could not be attributed to temporal effects such as fatigue and was invariant regardless of response effectors (finger or foot). Moreover, it was found that applied pedal force decreased immediately after an auditory stimulus interrupted SEM. Consequently, it was concluded that SEM can be a good predictor of reaction delays to auditory warning alarms when drivers are in a drowsy state. STATEMENT OF RELEVANCE: The present study demonstrated that simple auditory reaction time significantly increased when SEM emerged. In the design of vehicle safety systems using warning alarms to prompt avoidance behaviours from drivers, such reaction delays during SEM must be taken into account.     

Electrochemical oxidation of chlorophenols at a boron-doped diamond electrode and their determination by high-performance liquid chromatography with amperometric detection

Anodically pretreated diamond electrodes have been used for the detection of chlorophenols (CPs) in environmental water samples after high-performance liquid chromatographic (HPLC) separation. The anodization of as-deposited boron-doped polycrystalline diamond thin-film electrodes has enabled the stable determination of phenols over a wide concentration range. Prior to the HPLC analysis, a comparative study with ordinary glassy carbon, as-deposited diamond, and anodized diamond was made to examine the oxidative behavior of phenols by cyclic voltammety and flow injection analysis with amperometric detection. At anodized diamond electrodes, reproducible, well-defined cyclic voltammograms were obtained even at high CP concentration (5 mM), due to a low proclivity for adsorption of the oxidation products on the surface. In addition, after prolonged use, the partially deactivated diamond could be reactivated on line by applying a highly anodic potential (2.64 Vvs SCE) for 4 min, which enabled the destruction of the electrodeposited polymer deposits. Hydroxyl radicals produced by the high applied potential, in which oxygen evolution occurs, are believed to be responsible for the oxidation of the passivating layer on the surface. When coupled with flow injection analysis (FIA), anodized diamond exhibited excellent stability, with a response variability of 2.3% (n = 100), for the oxidation of a high concentration (5 mM) of chlorophenol. In contrast, glassy carbon exhibited a response variability of 39.1%. After 100 injections, the relative peak intensity, for diamond decreased by 10%, while a drastic decrease of 70% was observed for glassy carbon. The detection limit obtained in the FIA mode for 2,4-dichlorophenol was found to be 20 nM (S/N = 3), with a linear dynamic range up to 100 microM. By coupling with the column-switching technique, which enabled on-line preconcentration (50 times), the detection limit was lowered to 0.4 nM (S/N = 3). By use of this technique, anodized diamond electrodes were demonstrated for the analysis of CPs in drainwater that was condensed from the flue gas of waste incinerators.     

Size reduction in crystal grains in LiNb0.5Ta0.5O3 thin films by controlling nucleation density during thermal plasma spray chemical vapor deposition

Two approaches were applied to thermal plasma spray chemical vapor deposition (TPS CVD) in order to reduce crystal grain size or/and surface roughness of LiNb_0.5Ta_0.5O₃ thin films while retaining the advantages of this method, such as high deposition rate. The first method consists of a two-step deposition, where the nucleation density is controlled in the first step and the film with high crystallinity is deposited in the second step. The surface roughness and grain size could be reduced from 1 nm to 7.7 nm, and from 200-350 nm to 120-180 nm, respectively. In the second approach, employing a one-step TPS CVD process, the conventional precursor was substituted by a double-alkoxide precursor and grain size in the deposited films could be reduced to 50-80 nm. Both approaches adopted in this work permitted to reduce the optical propagation loss.     

Sloshing suppression control of liquid transfer systems considering a 3-D transfer path

In plants in many industries, there exist a lot of transfer systems with vibration mechanisms. While transfer without residual vibration is usually demanded in these plants, this requirement necessitates large numbers of sensors and complicated models for control design. Therefore, This work presents a trajectory control design method to suppress residual vibration in transfer systems without the need to directly measure vibration. The proposed method consists of two parts. First, the frequency characteristics of the controller, comprised of control elements with simple structures such as a notch filter and a low-pass filter, are shaped as needed to suppress vibration. Next, various parameters of the control elements are determined by solving an optimization problem with penalty terms expressed by the constraints of both the time and frequency domains. The proposed method is applied to a liquid container transfer system, with special consideration given to the suppression of sloshing (liquid vibration) as well as to the maintenance of a high-speed transfer on the container's three-dimensional transfer path. The obtained controller demonstrates good performance for all demands. The effectiveness of the control design method is shown by experiments.     

Chlorine isotope fractionation during reductive dechlorination of chlorinated ethenes by anaerobic bacteria

Chlorine isotope fractionation during reductive dechlorination of trichloroethene (TCE) and tetrachloroethene (PCE) to cis-1,2-dichloroethene (cDCE) by anaerobic bacteria was investigated. The changes in the 37Cl/35Cl ratio observed during the one-step reaction (TCE to cDCE) can be explained by the regioselective elimination of chlorine accompanied by the Rayleigh fractionation. The fractionation factors (alpha) of the TCE dechlorination by three kinds of anaerobic cultures were approximately 0.994-0.995 at 30 degrees C. The enrichment of 37Cl in the organic chlorine during the two-step reaction (PCE to cDCE) can be explained by the random elimination of one chlorine atom in the PCE molecule followed by the regioselective elimination of one chlorine atom in the TCE molecule. The fractionation factors for the first step of the PCE dechlorination with three kinds of anaerobic cultures were estimated to be 0.987-0.991 at 30 degrees C using a mathematical model. Isotope fractionation during the first step would be the primary factor for the chlorine isotope fractionation during the PCE dechorination to cDCE. The developed models can be utilized to evaluate the fractionation factors of regioselective and multistep reactions.     

Heterogeneity in Formation of Lignin. XIII. Formation of p-Hydroxyphenyl Lignin in Various Hardwoods Visualized by Microautoradiography

The heterogeneous nature of hardwood lignin was shown by visualizing the deposition process of p-hydroxyphenyl (H) lignin in the differentiating xylem of magnolia, beech, lilac and poplar. When p-glucocoumaryl alcohol-[arom. ring-2-³H], an efficient precursor of H units in lignin, was administered to the differentiating xylem of these trees, radioactivity was incorporated in the compound middle lamella region of vessel and fiber cell walls. The deposition of H units occurs only in the early stage of cell wall formation when the outer layer of the secondary wall is formed. H lignin deposits mainly within pectic substances and hemicellulose gel to form a highly condensed structural moiety.     

Integrated protocol for optimized link state routing and localization: OLSR-L

Localization protocol is important for estimating node positions in a wireless multi-hop network. Routing protocol is also important for controlling paths. In previous research, localization and routing protocols have been discussed and evaluated separately. In this paper, we propose an integrated protocol for optimized link state routing (OLSR) and OLSR based localization (ROULA). Our protocol enables simultaneous localization and routing. ROULA’s localization is performed using OLSR overhead such as hello packets and routing tables. The routing overheads and the processing procedures can be efficiently integrated. We demonstrate that the integrated protocol for ROULA and OLSR enables simultaneous localization and routing.