Stabilization of bioethanol recovery with silicone rubber‐coated ethanol‐permselective silicalite membranes by controlling the pH of acidic feed solution

In order to produce highly concentrated bioethanol by pervaporation using an ethanol‐permselective silicalite membrane, techniques to suppress adsorption of succinic acid, which is a chief by‐product of ethanol fermentation and causes the deterioration in pervaporation performance, onto the silicalite crystals was investigated. The amount adsorbed increased as the pH of the aqueous succinic acid solution decreased. The pervaporation performance also decreased with decreasing pH when the ternary mixtures of ethanol/water/succinic acid were separated. Using silicalite membranes individually coated with two types of silicone rubber, pervaporation performance was significantly improved in the pH range of 5 to 7, when compared with that of non‐coated silicalite membranes in ternary mixtures of ethanol/water/succinic acid. Moreover, when using a silicalite membrane double‐coated with the two types of silicone rubber, pervaporation performance was stabilized at lower pH values. In the separation of bioethanol by pervaporation using the double‐coated silicalite membrane, removal of accumulated substances having an ultraviolet absorption maximum at approximately 260 nm from the fermentation broth proved to be vital for efficient pervaporation. Copyright © 2005 Society of Chemical Industry     

Effects of cononsolvency on gelation of poly(vinyl alcohol) in mixed solvents of dimethyl sulfoxide and water

We studied the rates of gelation and phase separation of poly(vinyl alcohol) (PVA) solutions in mixtures of dimethyl sulfoxide (DMSO) and water at 25 °C and found that both the rates show a maximum at a volume fraction of DMSO φ_DMSO=0.60 while gelation was not observed either in pure DMSO or pure water, suggesting that water-DMSO is a cononsolvent system for PVA. On the basis of the data by Cowie [Can J Chem 36 (1961) 2240] we concluded that the 1:2 stable complex between one DMSO molecule and two water molecules is the main cause of this cononsolvency.     

Accelerated neutrophil apoptosis in mice lacking A1-a, a subtype of the bcl-2-related A1 gene

To elucidate the role of A1, a new member of the Bcl-2 family of apoptosis regulators active in hematopoietic cell apoptosis, we established mice lacking A1-a, a subtype of the A1 gene in mice (A1-a-/- mice). Spontaneous apoptosis of peripheral blood neutrophils of A1-a-/- mice was enhanced compared with that of either wild-type mice or heterozygous mutants (A1-a+/- mice). Neutrophil apoptosis inhibition induced by lipopolysaccharide treatment in vitro or transendothelial migration in vivo observed in wild-type mice was abolished in both A1-a-/- and A1-a+/- animals. On the other hand, the extent of tumor necrosis factor alpha-induced acceleration of neutrophil apoptosis did not differ among A1-a-/-, A1-a+/-, and wild-type mice. The descending order of A1 mRNA expression was wild-type, A1-a+/-, and A1-a-/-. Taken together, these results suggest that A1 is involved in inhibition of certain types of neutrophil apoptosis.     

Determination of fatty acid composition by gas chromatography: II. Analysis with use of flame ionization detector

In this study known mixtures of four or five fatty acid methyl esters were analyzed collaboratively by gas chromatography with flame ionization detectors. The experimental data was treated statistically to examine inter- and intralaboratory scattering. More-over the effect of the use of correction factors was investigated. Even if only the specific analytical values that scattered a little were chosen, the averages of such values did not always approach the actual values. In some laboratories a sort of regularity was observed in the deviation of analytical values from real values throughout the analyses of four samples. The application of correction factors to the analytical values obtained by these laboratories resulted in a considerable decrease of interlaboratory scattering and deviation from the real values. When a constant amount of sample was injected, intralaboratory scattering was decreased, whereas interlaboratory scattering was not. Injection of large sample sizes caused deviation. From this collaborative study it was recommended that 0.5–1.0 μl of 20% solution be injected. Presented at the JOCS-AOCS Joint Meeting, Los Angeles, April 1972.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Metal Single-Atom Cocatalyst on Carbon Nitride for the Photocatalytic Hydrogen Evolution Reaction: Effects of Metal Species

Single-atom (SA) catalysts exhibit high activity in various reactions because there are no inactive internal atoms. Accordingly, SA cocatalysts are also an active research fields regarding photocatalytic hydrogen (H₂) evolution which can be generated by abundant water and sunlight. Herein, it is investigated whether 10 transition metal elements can work as an SA on graphitic carbon nitride (g-C₃N₄; i.e., gCN), a promising visible-light-driven photocatalyst. A method is established to prepare SA-loaded gCN at high loadings (weight of ≈3 wt.% for Cu, Ni, Pd, Pt, Rh, and Ru) by modulating the photoreduction power. Regarding Au and Ag, SAs are formed with difficulty without aggregation because of the low binding energy between gCN and the SA. An evaluation of the photocatalytic H₂-evolution activity of the prepared metal SA-loaded gCN reveals that Pd, Pt, and Rh SA-loaded gCN exhibits relatively high H₂-evolution efficiency per SA. Transient absorption spectroscopy and electrochemical measurements reveal the following: i) Pd SA-loaded gCN exhibits a particularly suitable electronic structure for proton adsorption and ii) therefore they exhibit the highest H₂-evolution efficiency per SA than other metal SA-loaded gCN. Finally, the 8.6 times higher H₂-evolution rate per active site of Pd SA is achieved than that of Pd-nanoparticles cocatalyst.     

Design of moving magnet type pickup actuator using inserted coil

Recently, the demand of the information storage devices with large storage capacity such as Blu-ray Disc and high-definition television is increased. In keeping with this trend, the optical storage devices are also required to have high data transfer rate and large storage capacity. To satisfy these requirements, the actuator for optical disc drive should have a high servo bandwidth to compensate the vibration of optical disc. The servo bandwidth is limited by some flexible modes of the actuator, thus it is essential to make these frequencies of flexible modes to high frequency region. The frequency of flexible mode depends on materials and shape. Stiff materials and simple shape is useful to increase the frequency of flexible mode. In this paper, we suggested a moving magnet type actuator having flexible modes which are happened at high frequency region. Generally, the moving magnet type actuator has an advantage to increase the frequency of flexible mode because the moving magnet type actuator has simple structure and the Young’s modulus of magnet is high. However, large moving mass and inefficiency of Electromagnetic (EM) circuit cut down driving sensitivities of actuator. To improve driving sensitivities, we designed the model with the closed EM circuit for tracking actuation. The design of experiments (DOE) procedure is applied to get proper design parameters and the variable metric method (VMM) which is a technique of optimization is used to improve driving sensitivity. The lens holder is also improved based on the optimization result of EM circuit. And to make up for the low efficiency of EM circuit, the thermal stability is checked on condition that the input current is very high. At last, the final design of moving magnet type actuator is suggested and it is verified that the driving performance and the structural stiffness of the final design is sufficient.     

Logic circuit synthesis using Prolog

This paper briefly reviews the current use of CAD in logic design, and then describes an expert system used to synthesize logic circuits. Specialized knowledge dealing with standard TTL ICs is written in Prolog and AGE, and the results are compared.     

Decoupling properties of singular LQ regulation problem

Some properties of a limiting solution derived from a standard LQ regulator problem are discussed in the case where the input weighting matrix tends to zero, for a discrete time system. The explicit limiting solution is given in some literature. It is shown that the limiting solution is closely connected with a disturbance decoupling problem. Moreover it is pointed out that the limiting feedback gain with the help of feedforward gain constructs the decoupled system with the maximum number of blocks.