Stability enhancement of polypyrrole thin film ammonia sensor by camphor sulfonic acid dopant

Journal of Materials Science: Materials in Electronics - The main weakness of polymer gas sensors is its stability. Here, we report stability enhancement of a 100 nm polypyrrole (PPy) thin...     

Vibration analysis of machine tool’s hexapod table

Parallel mechanisms have found new applications in machine tool’s as the end effector carrying the spindle or used as the table of the machine. Investigations on the dynamics and especially the vibration behavior of these mechanisms are in the initial stage. The authors developed a vibration model for the hexapod table of milling machines and machining centers and derived the relevant explicit equations. The eigenvalue problem of the upper platform of hexapod was solved to obtain the natural frequencies of the platform. The results have been verified with FEM simulation. The distinguishing features of the hexapod tables from the view point of dynamic behavior have also been concluded.     

An Approximate Model of Multistage Automatic Transfer Lines with Possible Scrapping Of Workpieces

We consider multistage automatic transfer lines with unreliable stages, finite interstage buffer storages, and possible scrapping of workpieces. It is assumed that the first stage never idles and the last stage never becomes blocked. Assuming that uptimes and downtimes of a stage are geometrically distributed, an approximate model is developed to compute different performance measures of the transfer line. The results obtained through the approximate model are compared to the exact results for three-stage transfer lines and to simulation results for longer transfer lines. It is observed that the approximate results are good in almost all cases considered.     

An experimental study of a cross-flow type plate heat exchanger for dehumidification/cooling

The thermal and dehumidification behaviour of a standard cross-flow type plate heat exchanger, intended for use as a dehumidifier/cooler, has been investigated both experimentally and numerically. Three sets of experiments have been carried out where air is blown into the primary and secondary sides of the exchanger, while water and liquid desiccant were being sprayed in a counter flow arrangement. The first set represents the indirect evaporative cooling of the primary stream by the secondary air stream. The second set is with liquid desiccant only and no indirect evaporative cooling. In the third set of experiments the primary air stream is indirectly evaporatively cooled by the secondary air stream and dehumidified by the liquid desiccant sprayed into the primary side of the exchanger. The above experiments indicate that the heat exchanger performs well when used with liquid desiccant. Furthermore, for an exchanger angle of 45°, there is an optimum value of air mass flow rate at which the effectiveness and dehumidification efficiency of the plate heat exchanger are maxima. To investigate the effect of the ambient air conditions on the PHE performance, further experiments were carried out using a heater element and a humidifier. The results show that under laboratory conditions the exchanger effectiveness and dehumidification efficiency increase with increasing primary air inlet temperature and humidity ratio. The experimental results were used to validate a computer model developed for the cross-flow type plate heat exchanger/dehumidifier. Comparison indicates that the numerical results are in good agreement with the experiments.     

Signature analysis and defect detection in layered manufacturing of ceramic sensors and actuators

This paper presents the concept of a process signature for the use of online signature analysis and defect detection in the layered manufacturing (LM) of ceramic sensors and actuators. To achieve the high quality of parts built by the fused deposition of ceramics (FDC), an online process-monitoring system is implemented to detect the processing defects. Using a process signature extracted from the image of a layer captured by the monitoring system, an ideal image is created that is then compared to the original image to detect and identify the defects. Some results of signature analysis and defect detection for single-material and multi-material parts are also presented.Received: 22 July 1999, Accepted: 21 October 2001, Published online: 29 October 2003 Correspondence to: Mohsen A. JafariThis work was supported by the Office of Naval Research under grant # N-0014-96-1-1175. Ref. US Patent # S-5738817, April 14, 1998.     

Thermal modeling in cylindrical coordinates using effective conductivity

Predictive thermometry, utilizing minimally invasive sampling techniques, is an essential ingredient in the development of hyperthermia treatment planning capabilities. The authors demonstrate a powerful, but simple approach toward predicting temperature distributions in tissues, based on analytic solution, using in cylindrical symmetry, of the heat diffusion equation. Conduction and localized perfusion effects are combined as an effective conductivity term, readily measurable, and parametrized in a general exponential form. The proposed approach allows a first-order approximation to modeling three typical situations: hypoxic or necrotic tumor core with homogeneously perfused periphery; highly perfused periphery (in rapidly growing tumors); or perfused central cover with a less well-supplied periphery (such as for some invasive tumors). The utility and strength of this approach is that it provides a rapid, accurate model of directly observing the technical quality to be expected for different heating methods, making it possible to optimally configure source distributions in a treatment planning setting.     

Compatibilizing Effects on the Phase Morphology and Thermal Properties of Polymer Blends Based on PTT and m-LLDPE

Summary Morphology and thermal characteristics of poly (trimethylene terephthalate) (PTT)/ metallocene linear low-density polyethylene (m-LLDPE) blends with different amounts of a terpolymer based on glycidyl methacrylate (GMA), employed as a possible compatibilizer, were systematically examined. DMTA results show two distinct peaks for all neat blends associated with each phase. Melt crystallization degree of both phases in all the blends was observed to be reduced compared to pure components, except for that of PTT-rich phase in those blends with PTT as the matrix which slightly increases. Addition of the terpolymer to the system is found to effectively reduce the droplet size of the dispersed phase and increase phase adhesion. Also it increases the crystallinity of PTT in the system with PTT as the matrix. The influence of the compatibilizer is ascribed to the chemical interaction of PTT functional end groups with GMA functionalities. The efficiency of the terpolymer as a compatibilizer beyond 5 wt% content decreases which can be ascribed to the interface saturation and formation of micelles in the bulk phases.     

A game attention model for efficient bit rate allocation in cloud gaming

The widespread availability of broadband internet access and the growth in server-based processing have provided an opportunity to run games away from the player into the cloud and offer a new promising service known as cloud gaming. The concept of cloud gaming is to render a game in the cloud and stream the resulting game scenes to the player as a video sequence over a broadband connection. To meet the stringent network bandwidth requirements of cloud gaming and support more players, efficient bit rate reduction techniques are needed. In this paper, we introduce the concept of game attention model (GAM), which is basically a game context-based visual attention model, as a means for reducing the bit rate of the streaming video more efficiently. GAM estimates the importance of each macro-block in a game frame from the player’s perspective and allows encoding the less important macro-blocks with lower bit rate. We have evaluated nine game video sequences, covering a wide range of game genre and a spectrum of scene content in terms of details, motion and brightness. Our subjective assessment shows that by integrating this model into the cloud gaming framework, it is possible to decrease the required bit rate by nearly 25 % on average, while maintaining a relatively high user quality of experience. This clearly enables players with limited communication resources to benefit from cloud gaming with acceptable quality.     

THE EFFECT OF PRECIPITATION PARAMETERS ON PREPARATION OF LITHIUM FLUORIDE (LIF) NANO-POWDER

Lithium fluoride powder (LiF) is a white powder with a density of 2.64 gr/cm³ and a melting point of 848°C. This powder has several applications such as flux, glaze, soldering, and aluminum melting process, but one of the most important uses of this powder is its application in dosimetry. The commercial powders currently used for this purpose have average sizes of 5 to 10 micrometers; the objective of this research is to produce LiF powder with nano-metric particle size. In this study, the reaction of LiOH + HF → LiF + H₂O has been selected from among several reactions that were able to produce LiF powder, and some precipitation parameters such as temperature, time, agitation type, and supersaturation degree have been controlled. The morphology, phase analysis, and particle size distribution of the resulting powders were analyzed by SEM, XRD, and LPSA. Finally, lithium fluoride nano-powder was synthesized at a temperature of 25°C, pH about 2-3, reaction time less than 1 s, and agitation by ultrasonic bath.     

CFD simulation and evaluation of controllable parameters effect on thermomagnetic convection in ferrofluids using Taguchi technique

In the present attempt a CFD simulation capable of coupling behaviors from the nano-scale through the full-scale system in which a ferrofluid containing magnetite particles suspended in kerosene carrier liquid is presented. The main objective of the work was to simulate the thermodiffusion and also to evaluate the factors influence on this phenomenon in a cylindrical geometry. In simulations a two-phase mixture model was used to predict the behavior of the system. To optimize the thermomagnetic effect, different parameters including temperature difference across the layer, initial magnetic phase concentration, aspect ratio of the geometry, magnetic field magnitude and diameter of magnetic particles were examined using L₁₆ orthogonal array of Taguchi at four levels. Analysis of the simulation data indicate that the magnetic Soret effect can even be higher than the conventional one and its strength depends on the magnetic field strength, confirmed experimentally by Völker and Odenbach [Völker T, Odenbach S. Thermodiffusion in magnetic fluids. J Magn Magn Mater 2005;289:289-91]. The statistic evaluation shows that temperature and initial concentration of magnetic phase have the maximum and minimum contribution on the thermodiffusion, respectively. According to the results temperature difference 80 K, initial concentration of magnetic phase 0.08, aspect ratio 0.2, magnetic field strength 100 kA/m and magnetic particles diameter 100 nm were obtained as optimum conditions in the presence of natural convection. The same result was gained in the lack of natural convection except the magnetic field strength was 160 kA/m. Finally, based on the primary results, a verification test was also performed to confirm the validity of the used statistical method.