借长庆春风更上一层楼

无论是否愿意承认,疫情都改变了人们的生活节奏。去年,中国在忐忑不安中渡过了一个不一般的春节.转眼又是一个春节,相信每一个人的心情都是复杂的。国内抗疫取得阶段性胜利,但全球疫情感染者已突破一亿。在境外疫情不断冲击下,临近年关,境内疫情出现多点散发。     

Feasibility study of large-scale mass customization 3D printing framework system with a case study on Nanjing Happy Valley East Gate

At present, the development and implementation of digital transformation are the keys to promoting high-quality industry development. The new digital fabrication method of robotic 3D printing is a research area being studied by many to tackle the issue of the declining productivity of traditional construction methods. Although many studies have been done, most of the current 3D printing projects are facing limitations in terms of scale. In order to bridge the gap, this article proposed a mass customization 3D printing framework system for large-scale projects. This article discusses how mass customization is made possible through the joint operation of the FUROBOT software and 3D printing hardware. By taking the east gate of Nanjing Happy Valley Plaza as a case study, the article demonstrates and studies the feasibility of the large-scale mass customization 3D printing framework system.     

《岩石力学与工程学报》征稿简则

本刊系中国科协主管、中国岩石力学与工程学会主办的力学类和土木工程类总被引频次和影响因子均居前列的期刊,为建筑科学与水利工程类国家核心期刊,获评“中国百强报刊”、“湖北十大名刊”、“中国百种杰出学术期刊”和"中国最具国际影响力学术期刊"等荣誉称号;被美国EICOMPENDEX、《剑桥科学文摘》(CSA)、《日本科学技术社数据库》和国内许多权威数据库确定为核心收录期刊。凡在本刊上发表的论文,即认为作者默认并同意其论文被以上数据库收录。     

超宽带大功率合成器设计北大核心CSCD

在80 MHz~1 GHz频段,单个功率管输出功率能达到100 W以上,为研制输出功率400 W的功率放大器,文中设计了四路功率合成器。该合成器需要实现功率容量大、工作频带宽、体积小的设计目标。在功率容量方面,文中采用悬置带状线结构,其功率容量远远大于微带线结构;在工作频带方面,采用切比雪夫九节阻抗变换器,将工作带宽拓宽为80 MHz~1 GHz;在体积方面,文中合成器的功率合成部分采用Y型节级联实现四路功率合成,阻抗变换部分采用切比雪夫阻抗变换器进行阻抗变换,该结构相较于磁环巴伦功率合成器,不但具有损耗小、平坦度高的优点,而且通过将阻抗变换器设计成曲折的形状,进一步缩小了合成器体积。仿真与实测结果显示该合成器在80 MHz~1 GHz范围内还具有较高的平坦度,合成效率可达90%以上。     

本刊征稿启事

正《玻璃》创刊于1974年,是经国家科委批准由秦皇岛玻璃工业研究设计院主办的公开发行的建材科技期刊。主要报道平板玻璃及玻璃深加工方面的新技术、新工艺、新产品。在原有的综述与研究、探讨与争鸣、技术交流、生产经验等主要栏目的基础上,《玻璃》又增加了经营管理、节能减排、方针政策、科技动态、学术交流、特种玻璃等内容,着重加大对玻璃深加工技术方面的报道,如中空玻璃、镀膜玻璃、安全玻璃、艺术玻璃等,欢迎广大从事玻璃深加工专业的     

大势·之趋——本刊专访行业翘楚解析2015中国汽车后市场所趋之势

察市场之所趋,方能成其大势。在经历了2013年跌宕波折、2014年的新品叠出之后,2015年国内汽车后市场所趋之势何在?在第11届AAITF深圳展会上,本刊编辑部特别就技术动向、市场走势、模式分析等话题,专访了天派电子(深圳)有限公司总裁欧阳旭、上海畅星信息科技有限公司董事长陈刚、中国电信车联网基地常务副总经理江晓炜、深圳市车航健汽车数码科技有限公司董事长刘耀、钛马车联网创始人兼总裁叶志华、厦门瑞忆科技有限公司董事长陈柏谚、深     

Amination of biochar surface from watermelon peel for toxic chromium removal enhancement

Watermelon peel residues were used to produce a new biochar by dehydration method. The new biochar has undergone two methods of chemical modification and the effect of this chemical modification on its ability to adsorb Cr(VI) ions from aqueous solution has been investigated. Three biochars, Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, were made from watermelon peel via dehydration with 50% sulfuric acid to give Melon-B followed by oxidation with ozone and amination using ammonium hydroxide to give Melon-BO-NH_2 or Triethylenetetramine(TETA) to give Melon-BO-TETA. The prepared biochars were characterized by BET, BJH,SEM, FT-IR, TGA, DSC and EDAX analyses. The highest removal percentage of Cr(VI) ions was 69% for Melon-B,98% for Melon-BO-NH_2 and 99% for Melon-BO-TETA biochars of 100 mg·L~(-1) Cr(VI) ions initial concentration and 1.0 g·L~(-1) adsorbents dose. The unmodified biochar(Melon-B) and modified biochars(Melon-BO-NH_2 and Melon-BO-TETA) had maximum adsorption capacities(Qm) of 72.46, 123.46, and 333.33 mg·g~(-1), respectively.The amination of biochar reduced the pore size of modified biochar, whereas the surface area was enhanced.The obtained data of isotherm models were tested using different error function equations. The Freundlich,Tempkin and Langmuir isotherm models were best fitted to the experimental data of Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, respectively. The adsorption rate was primarily controlled by pseudo-second–order rate model. Conclusively, the functional groups interactions are important for adsorption mechanisms and expected to control the adsorption process. The adsorption for the Melon-B, Melon-BO-NH_2 and Melon-BO-TETA could be explained for acid–base interaction and hydrogen bonding interaction.     

工信部发布《重点新材料首批次应用示范指导目录（2019年版）》

工信部发布《重点新材料首批次应用示范指导目录(2019年版)》为进一步做好重点新材料首批次应用保险补偿试点工作,2019年12月2日工业和信息化部发布了《重点新材料首批次应用示范指导目录(2019年版)》,该目录自2020年1月1日起施行,2018年版目录同时废止。5种弹性体被纳入2019年版目录的先进化工材料。(1)无卤阻燃热塑性弹性体(TPV),性能要求为:邵尔A型硬度65~75度,拉伸强度>10 MPa,密度1.1 Mg·m-3,阻燃V0或者符合ISO 6722标准,应用领域为电动汽车、航空航天。