排序方式: 共有39条查询结果,搜索用时 93 毫秒
1.
动态二进制翻译中,翻译和执行的基本单元是基本块。一个基本块执行完毕,程序的控制权必须回到执行引擎,开始下一个基本块的查询,这导致频繁的控制权切换。对基本块应用跳转链接技术能够减少这种频繁的控制权切换。该文总结了二进制翻译器中一些常用的跳转链接方法,包括翻译块链接、路径线性化、分支预测等,并通过实验数据证实了跳转链接技术的有效性。 相似文献
2.
3.
4.
5.
针对嵌套命名实体识别,神经网络模型中提出基于跨度的框架。该框架首先产生跨度种子,然后搭建分类器进行筛选。但单独对跨度区域进行分类存在丢失全局语义信息的问题。另外,在中文嵌套命名实体识别中,因为缺少分隔符且中文高度依赖上下文,跨度区域无法有效使用词边界特征,导致识别性能不佳。为解决上述问题,本文提出结合实体标签的中文嵌套命名实体识别模型(CEL)。该模型生成跨度种子后,在原句子的跨度区域开始及结束位置嵌入实体标签,再作为分类器输入,从而更好地学习到跨度种区域边界和上下文之间的语义依赖特征。论文在ACE2005中文数据集上进行实验,实验表明,CEL模型在F1值上达到了较好水平。 相似文献
6.
战场通信网络是一个复杂、综合性强、满足特殊军事需求的通信网络,其建模与仿真离不开战场环境.论文根据战场通信网络的主要特点、组成要素、仿真目的与仿真内容,以促进模型的重用和互操作为宗旨,采纳了OPNET的分层建模机制,针对网络三要素(网络、链路、节点)提出了分层的建模思想以及基于分层建模思想的战场通信网络仿真构想,建立了基于HLA的战场通信系统仿真框架,分析了组成战场通信网络仿真成员的各部分功能及内部交互,并论述了战场通信网络建模与仿真中可能的难点与重点. 相似文献
7.
潘丽君李阳何鑫蔡俊韬包绵腾吴明建张美庆陈锏中董秋彤 《微纳电子技术》2018,(8):551-556
首先,采用光刻技术并结合湿法刻蚀工艺,在玻璃衬底上制备出蜂窝状分布的圆台阵列微结构,从占空比和反射、透射光线分布的角度分析其光学性能。然后,采用水热法制备银纳米线,并对样品进行X射线衍射(XRD)物相分析和扫描电子显微镜(SEM)微观形貌表征,得到平均直径为80 nm、长度为110μm、长径比大于1 000的超细长银纳米线。最后,通过浓硫酸和双氧水的混合溶液对微结构表面改性,并采用变速旋涂法将银纳米线与微结构完美嵌合,从而制备出基于玻璃衬底上圆台阵列微结构的银纳米线透明导电薄膜,其光电性能优良,测得其可见光透过率为85.97%、方块电阻平均值为23.1Ω/□。 相似文献
8.
9.
工业厂房采用钢筋混凝土连续单向板楼盖,选用不同的板厚及配筋,均能符合设计规范有关承载能力、挠度及裂缝宽度的要求,但是它们的造价却各不相同.本文对板厚的选择与造价之间的关系进行了探讨,给出了板合理厚度及相应配筋的选用表. 相似文献
10.
In order to analyze the influence of the radial clearance to the reliability of the four row conical roller bearing, the special calculator program of bearing BEM was compiled based on the method of three dimensional elastic contact boundary element method with frication, in which the plate units were used to simulate the rollers. When equal radial clearance and unequal clearance were applied to the mill four row conical roller bearing, the distribution of radial pressure, radial and axial load were simulated with the program. The influence rules of radial clearance to the pressure and load distribution of four row conical roller bearing were analyzed. According to the result, the load proportion of the mill four row conical roller bearing didnt change when equal radial clearance was adopted. And the number of the standunderload rollers decreased and the load of one roller bearing increased when positive equal radial clearance was adopted. The situation was opposite when negative equal radial clearance was adopted. When unequal radial clearance was adopted, the load proportion of the row with the larger value of radial clearance decreased and the bias factor was decreased. 相似文献