Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.     

Parkinson’s Disease Detection Using Biogeography-Based Optimization

In recent years, Parkinson's Disease (PD) as a progressive syndrome of the nervous system has become highly prevalent worldwide. In this study, a novel hybrid technique established by integrating a Multi-layer Perceptron Neural Network (MLP) with the Biogeography-based Optimization (BBO) to classify PD based on a series of biomedical voice measurements. BBO is employed to determine the optimal MLP parameters and boost prediction accuracy. The inputs comprised of 22 biomedical voice measurements. The proposed approach detects two PD statuses: 0-disease status and 1- good control status. The performance of proposed methods compared with PSO, GA, ACO and ES method. The outcomes affirm that the MLP-BBO model exhibits higher precision and suitability for PD detection. The proposed diagnosis system as a type of speech algorithm detects early Parkinson’s symptoms, and consequently, it served as a promising new robust tool with excellent PD diagnosis performance.     

Cation exchange membranes by radiation-induced graft copolymerization of styrene onto PFA copolymer films. I. Preparation and characterization of the graft copolymer

PFA-g-polystyrene graft copolymers were prepared by simultaneous radiation-induced graft copolymerization of styrene onto poly(tetrafluoroethylene-co-perfluorovinyl ether) (PFA) films. The effects of grafting conditions such as monomer concentration, dose, and dose rate were investigated. Three solvents, i.e., methanol, benzene, and dichloromethane, were used as diluents in this grafting system. Of the three solvents employed, dichloromethane was found to greatly enhance the grafting process, and the degree of grafting increased with the increase of monomer concentration until it reached its highest value at a styrene concentration of 60 (vol %). The dependence of the initial rate of grafting on the monomer concentration was found to be of the order of 1.2. The degree of grafting was found to increase with the increase in irradiation dose, while it considerably decreased with the increase in dose rate. The formation of graft copolymers was confirmed by FTIR analysis. The structural investigation by X-ray diffraction (XRD) shows that the degree of crystallinity content of such graft copolymers decreases with the increase in grafting, and consequently, the mechanical properties of the graft copolymers were influenced to some extent. Both tensile strength and elongation percent decreased with the increase in the degree of grafting. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2095–2102, 1999     

Electrical Properties of Garut Citrus Fruits at Low Alternating Current Signal and its Correlation with Physicochemical Properties During Maturation

In this research, local citrus fruits, namely Garut citrus, were analyzed for electrical properties related to physicochemical properties. Electrical measurement on fruit was done by using low alternating current with a frequency varying from 50 Hz to 1 MHz. The fruits are placed between two plate electrodes and treated as dielectric material. Electrical parameters per unit of weight were used in this study to compensate variations in weight. Electrical impedance, resistance, and reactance per weight of citrus fruits will decrease if the frequency is increased. Electrical circuit models have been constructed to describe the internal conditions of citrus fruits. To indicate the fruit maturity, the physicochemical properties were used, i.e., firmness, total soluble solids, pH, and hydrogen ion concentration. The value of resistance, impedance, and reactance per weight declined during citrus fruits maturation. The correlations between electrical and physicochemical properties are investigated too. The highest consistency of correlations happens at a frequency of 1 MHz. Based on the model of an electrical circuit, the highest value of electrical resistance is outer shell and the lowest is seed. And then, the highest value of electrical capacitance is albedo and the lowest is segment. Resistance values of the parts of citrus fruits, i.e., seed, segment, segment wall, and outer shell, were decreased during maturation. While capacitance value of segment, albedo, and flavedo were increased.     

Graft copolymerization of methyl methacrylate onto oil palm empty fruit bunch fiber using H2O2/Fe2+ as an initiator

Graft copolymerization of methyl methacrylate (MMA) onto oil palm empty fruit bunch fiber (OPEFB) was successfully carried out in aqueous medium using hydrogen peroxide as an initiator. Results from the investigation of the optimum conditions for grafting are presented. Maximum percentage of grafting was achieved when the amount of initiator, cocatalyst, and nitric acid were 5.877 × 10^?3 mol, 2.63 × 10^?4 mol, and 3.24 × 10^?3 mol, respectively. The optimum reaction temperature was 50°C and the reaction period was 120 min. The highest percentage of grafting and grafting efficiency were 220 and 47%, respectively, under optimum conditions. The grafted copolymer was characterized by FTIR spectroscopy and scanning electron microscopy. The presence of a band at 1730 cm^?1 provides strong evidence of grafting. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2233–2238, 2003     

Operative temperature and thermal sensation assessments in non-air-conditioned multi-storey hostels in Malaysia

This study assessed the influences of operative temperature on occupants’ perceptions of indoor thermal condition in three non-air-conditioned multi-storey hostels in Klang Valley, Malaysia. The thermal conditions of 24 measured rooms were recorded with and without an operating ceiling fan from May until July 2007. Measurements were made simultaneously at three different floor levels, namely, at the first, fifth and top floor of each of the case study hostels. A questionnaire survey was completed by 298 female student occupants of the same case study hostels. The results suggested that even though a significance above p < 0.01 was recorded between the operative temperatures with and without fan operation, the temperature difference remained small, i.e., from 0.5 K to 1 K. The findings of the questionnaire survey showed that the occupants perceived the thermal conditions in rooms that were shaded with a projected balcony (shading ratio of 0.9), a long roof overhang (shading ratio of 1.6) and an operable window-to-wall ratio of 0.3 to be thermally comfortable.     

Key factor in rice husk Ash/CaO sorbent for high flue gas desulfurization activity

Siliceous materials such as rice husk ash (RHA) have potential to be utilized as high performance sorbents for the flue gas desulfurization process in small-scale industrial boilers. This study presents findings on identifying the key factorfor high desulfurization activity in sorbents prepared from RHA. Initially, a systematic approach using central composite rotatable design was used to develop a mathematical model that correlates the sorbent preparation variables to the desulfurization activity of the sorbent. The sorbent preparation variables studied are hydration period, x1 (6-16 h), amount of RHA, x2 (5-15 g), amount of CaO, x3 (2-6 g), amount of water, x4 (90-110 mL), and hydration temperature, x5 (150-250 degrees C). The mathematical model developed was subjected to statistical tests and the model is adequate for predicting the SO2 desulfurization activity of the sorbent within the range of the sorbent preparation variables studied. Based on the model, the amount of RHA, amount of CaO, and hydration period used in the preparation step significantly influenced the desulfurization activity of the sorbent. The ratio of RHA and CaO used in the preparation mixture was also a significant factor that influenced the desulfurization activity of the sorbent. A RHA to CaO ratio of 2.5 leads to the formation of specific reactive species in the sorbent that are believed to be the key factor responsible for high desulfurization activity in the sorbent. Other physical properties of the sorbent such as pore size distribution and surface morphology were found to have insignificant influence on the desulfurization activity of the sorbent.     

Development of kinetic model for the reaction between SO2/NO and coal fly ash/CaO/CaSO4 sorbent

Sorbents for semidry-type flue gas desulfurization (FGD) process can be synthesized by mixing coal fly ash, calcium oxide, and calcium sulfate in a hydration process. As sorbent reactivity is directly correlated with the specific surface area of the sorbent, reacting temperature, concentration of the reacting gas species and relative humidity, two major aim in the development of a kinetic model for the FGD process are to obtain an accurate model and at the same time, incorporating all the parameters above. Thus, the objective of this work is to achieve these two aims. The kinetic model proposed is based on the material balance for the gaseous and solid phase using partial differential equations incorporating a modified surface coverage model which assumes that the reaction is controlled by chemical reaction on sorbent grain surface. The kinetic parameters of the mathematical model were obtained from a series of experimental desulfurization reactions carried out under isothermal conditions at various operating parameters; inlet concentration of SO₂ (500 ppm  C_0,SO2  2000 ppm), inlet concentration of NO (250 ppm  C_O,NO  750 ppm), reaction temperature (60 °C  T  80 °C) and relative humidity (50%  RH  70%). For a variety of initial operating conditions, the mathematical model is shown to give comparable predictive capability when used for interpolation and extrapolation with error less than 7%. The model was found useful to predict the daily operation of flue gas desulfurization processes by using CaO/CaSO₄/coal fly ash sorbent to remove SO₂ from flue gas.