Use of Warranties on Highway Projects: A Real Option Perspective

Since the introduction of warranty provisions in federal highway jobs, more and more state departments of transportation (DOTs) have considered the use of such provisions to protect their initial investment. This paper describes the pros and cons of warranty contracting in highway construction based on a survey of warranty practices in the United States. In particular, the need for state DOTs to buy a warranty for a well-built project is questioned. As an alternative, this paper introduces the warranty option, which gives the DOT the right to buy a warranty only if it becomes necessary at the end of construction. This option is exercised if the performance on site warrants it. This paper describes the mechanics of the warranty option and its advantages over the conventional warranty. A bid evaluation model is also developed for the warranty option approach.     

Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A New Recycled Al–Si–Mg Alloy for Sustainable Structural Die Casting Applications

Metallurgical and Materials Transactions A - The use of secondary aluminum for structural components in the automotive industry is limited by the high Fe contents in recycled alloys which often...     

Poly(Acrylamide-Sepiolite) Composite Hydrogels: Preparation, Swelling and Dye Adsorption Properties

Summary Polymer-clay hydrogel composite was prepared on the basis of polyacrylamide (PAAm) gel containing the clay mineral sepiolite. The properties of swelling and dye adsorption of poly(acrylamide-sepiolite) (AAm/Sep) composite hydrogel were investigated. The parameters of swelling and diffusion in water and dye solutions were calculated for the AAm and AAm/Sep hydrogels. It was found that the equilibrium swelling degree of obtained composite higher than that of AAm gel. Spectroscopic analysis of composite and composite-dye systems was done with FT-IR method. Adsorption of monovalent cationic dyes such as Basic Blue 12 (BB-12) Basic Blue 9 (BB-9), and Basic Violet 1 (BV-1), was studied on the composite. In the adsorption experiments, S (Sigmoidal) type for composite gel adsorption isotherms in the Giles classification system was found. Adsorption studies indicated that the amounts of adsorbed dyes on the AAm/Sep composite hydrogel were increased with following order; BB-12 > BB-9 > BV-1. The composite hydrogel may be considered as good candidate for environmental application to retain more water and dyes.     

Unveiling the presence of mixed oxidation states of Europium in Li7+δEuxLa3−δZr2−δO12−δ garnet and its impact on the Li-ion conductivity

Recently, lanthanides have been employed by researchers to examine their impact on the structure and properties of Li₇La₃Zr₂O₁₂ (LLZO) garnets. In this regard, we developed Europium oxide (Eu₂O₃) doped LLZO (Li_7+δEu_xLa_3−δZr_2−δO_12−δ) solid electrolyte which demonstrates a cubic phase with the symmetry of Iad (No.230) at room temperature. In this investigation, different concentrations of Eu ranging from 0.1 to 0.6 atoms per formula unit (pfu) were doped into Li₇La₃Zr₂O₁₂ to evaluate the impact of Eu on the stability of the cubic phase and thereby the ionic conductivity. The results unveiled that upon doping Eu³⁺ ions, the Eu²⁺ state is also formed and is then self-doped into the structure in which Rietveld refinement coupled with XPS, EPR, and solid-state NMR suggests that Eu³⁺ ions most probably partially occupy Zr⁴⁺ (16a) site, the Eu²⁺ ions occupy La³⁺ (24d) site, and the Li⁺ ions occupy two different sites (24d and 96h). It was further found that such a site preference induces distortion at LaO₈ polyhedrons opening up the neck for Li-ions diffusion, thereby enhancing the ionic conductivity. Moreover, it was revealed that Li-ions probably hop from 96h to 24d and then to 96h site to generate the Li-ion movement. Overall, by introducing Eu ions into the LLZO structure, an enhanced bulk ionic conductivity of 0.30 × 10⁻³ S/cm at 298 K with a minimum electronic conductivity of 2.547 × 10⁻⁹ S/cm at 298 K was achieved.     

Remote-Controlled Ambidextrous Robot Hand Concept

In the development of robotic limbs, the side of members is of importance to define the shape of artificial limbs and the range of movements. It is mainly significant tbr biomedical applications concerning patients suffering arms or legs injuries, fn this paper, the concept of an ambidextrous design lbr robot hands is introduced. The fingers can curl in one xvay or another, to imitate either a right hand or a left hand. The advantages and inconveniences of different models have been investigated to optimise the range and the maximum force applied by fingers. Besides, a remote control interthce is integrated to the system, allowing both to send comrnands through internet and to display a video streaming of the ambidextrous hand as feedback. Therefore, a robotic prosthesis could be used for the first time in telerehabilitation. The main application areas targeted are physiotherapy alter strokes or management of phantom pains/br amputees by/earning to control the ambidextrous hand. A client application is also accessible on Facehook social network, making the robotic limb easily reachable for the patients. Additionally the ambidextrous hand can be used tbr robotics research as well as artistic performances.     

Robustness with dynamic IQCs: An exact state-space characterization of nominal stability with applications to robust estimation

For robustness analysis with integral quadratic constraints, we formulate a new positivity condition on the solution of the corresponding linear matrix inequality which is necessary and sufficient for nominal stability of the underlying system. The application of this technical result is illustrated by a complete solution of the L₂-gain and robust H₂-estimator design problems if the uncertainties are characterized by dynamic integral quadratic constraints.     

On the design considerations of solid-state power amplifiers for satellite communications: A systems perspective

Conventional solid-state power amplifier (SSPA) design approach isolates radio frequency (RF) design from communication theory. In this paper, a unified SSPA design approach is proposed, which optimizes SSPA parameters (bias voltage and input RF signal power) to minimize total DC power consumption while satisfying received SNR constraint specified by the link budget. The effect of SSPA nonlinearity is quantified by the error vector magnitude measured at its output and the corresponding received SNR degradation is analyzed. Using the quantitative metrics for received SNR, it is possible to evaluate highly nonlinear SSPA classes such as Class-B or deep-Class AB, which are normally not considered in conventional SSPA design approach to be used in satellite communication applications.