用DSP实现多目标实时跟踪

介绍了在 TMS3 2 0 C62 0 3上实现 4个目标的快速跟踪技术。为了提高实时性和精确度 ,采用线性汇编优化实现。1个 3 2 0× 160主窗口的 DSP平均处理时间为 2 m s,3个 60× 60副窗口的 DSP平均处理时间各为 0 .4ms,实现了复杂背景下低对比度目标的快速跟踪。实验结果证明跟踪效果良好 ,解决了以前窗口开不大、跟踪速度慢的问题     

基于遗传算法的优化排样

介绍了遗传算法以及二维不规则图形的计算机优化排样，研究了二维不规则图形排样中如何建立遗传算法的目标函数，如何实现交叉、变异运算等优化过程，找到了运用遗传算法实现二维不规则图形优化排样的方法。通过计算机编制了运用遗传算法进行二维不规则图形优化排样的运算程序，并对部分样形进行了优化排样，结果比较满意。     

基于预前控制异步电机直接转矩控制方案的研究

在传统异步电动机直接转矩控制方案中，由于负载的变化规律不可预测，因此其常会带来较大的开关频率的变化，为此提出了一种基于预前控制的异步电动机直接转矩控制的方法。该方法依据前一个周期的磁链和转矩误差，对下一个开关周期所应施加到异步电动机的定子电压矢量进行预测，然后借助空间矢量PWM的方法，合成此开关电压矢量。样机实验结果表明，该方案不但能维持逆变器的开关频率基本恒定，而且还具有比传统直接转矩控制更为优良的动静态特性。     

大庆油田油气勘探“五五”工程的实践与效果

大庆油田公司确立的油气勘探“五五”工程的核心是立足油气勘探长远发展、统筹老区与新领域勘探,兼顾工程实施与地质研究、系统配套相关技术理论,内容是调整工程和投资结构、完善油气勘探地质理论、发展各项适用技术,目的是促进油气勘探寻求大发现、获得大突破。通过实施“五五”工程,勘探工作运行平稳,勘探成果殷实丰硕,勘探领域层次分明,对油气勘探工作的发展产生了巨大的推动力,确保了大庆探区油气勘探实施的效果。通过对油气勘探“五五”工程实践过程的深入剖析,认为在油气勘探中“思路决定出路、前置加载量是基础、新技术应用是关键”。     

KINETICS OF HYDROCARBON GAS GENERATION FROM MARINE KEROGEN AND OIL: IMPLICATIONS FOR THE ORIGIN OF NATURAL GASES IN THE HETIANHE GASFIELD, TARIM BASIN, NW CHINA

In this paper we derive kinetic parameters for the generation of gaseous hydrocarbons (C_1‐5) and methane (C₁) from closed‐system laboratory pyrolysis of selected samples of marine kerogen and oil from the SW Tarim Basin. The activation energy distributions for the generation of both C_1‐5 (Ea = 59‐72kcal, A = 1.0×10¹⁴ s^?1) and C₁ (Ea = 61‐78kcal, A = 6.06×10¹⁴ s^?1) hydrocarbons from the marine oil are narrower than those for the generation of these hydrocarbons from marine kerogen (Ea = 50‐74kcal, A = 1.0×10¹⁴ s^?1 for C_1‐5; and Ea = 48‐72kcal, A=3.9×10¹³ s^?1 for C₁, respectively). Using these kinetic parameters, both the yields and timings of C_1‐5 and C₁ hydrocarbons generated from Cambrian source rocks and from in‐reservoir cracking of oil in Ordovician strata were predicted for selected wells along a north‐south profile in the SW of the basin. Thermodynamic conditions for the cracking of oil and kerogen were modelled within the context of the geological framework. It is suggested that marine kerogen began to crack at temperatures of around 120°C (or 0.8 %Ro) and entered the gas window at 138°C (or 1.05 %Ro); whereas the marine oil began to crack at about 140 °C (or 1.1 %Ro) and entered the gas window at 158 °C (or 1.6%Ro). The main geological controls identified for gas accumulations in the Bachu Arch (Southwest Depression, SW Tarim Basin) include the remaining gas potential following Caledonian uplift; oil trapping and preservation in basal Ordovician strata; the extent of breaching of Ordovician reservoirs; and whether reservoir burial depths are sufficiently deep for oil cracking to have occurred. In the Maigaiti Slope and Southwest Depression, the timing of gas generation was later than that in the Bachu Arch, with much higher yields and generation rates, and hence better prospects for gas exploration. It appears from the gas generation kinetics that the primary source for the gases in the Hetianhe gasfield was the Southwest Depression.     

贮煤塔开闭器驱动装置的改造

针对炼铁厂炼焦车间贮煤塔和开闲器驱动装置存在故障频繁，堵煤、开闭器易损坏和吹风管堵塞等问题，通过分析并结合实际情况，将煤塔漏嘴由27只减为9只双曲线形状漏嘴，开闭器驱动装置由车载驱动改为固定驱动。改造后，解决了使用中堵煤及开闭器驱动装置损坏等问题，降低了设备故障率，减少了生产成本，增加了装煤量，满足了生产需要。     

New concept of surface modification to LiCoO2

As the continuance of our series study on LiCoO₂ surface modification, the complicated traditional surface coating method is replaced with simple addition of amorphous YPO₄ and Al₂O₃ in commercial LiCoO₂ or in commercial electrolyte based on our understanding to the improvement mechanism of surface modification. Comprehensive studies by X-ray photoelectron spectroscopy (XPS), gas chromatography and mass spectroscopy (GC–MS), inductively coupled plasma (ICP) and Fourier transformed infrared (FTIR) indicate that the products of spontaneous reaction between the additive and the LiPF₆ based electrolyte are responsible for the performance improvements.     

采用轴径向技术有效解决固定床反应器阻力降的快速升高

讨论了固定床反应器阻力降快速升高的原因，介绍了用轴径向技术解决这一问题的原理及优点，及其在铁铬系变换催化剂和钴钼系耐硫变换催化剂反应器中的实际应用。     

热收缩套管及其成型方法

本文介绍了热收缩套管的收缩机理及成型方法，如气压吹胀法、机械扩张法和缠绕法等。并对管材结构、原料及主要工艺技术简要地进行了比较和评价。     

风水联动放炮自动喷雾装置设计

矿尘始终是困扰井下安全生产的重要因素之一，危害很大。长期从事采掘和粉尘作业环境的职工易引起尘肺病，另外，在粉尘作业场所工作的职工的视线易受阻挡，操作中易造成人身事故。