Purification,structural data and biological properties of polysaccharide from Prunus amygdalus gum

This work demonstrates the efficiency of almond gum polysaccharides (AGPs) as bioactive compounds. AGPs were first extracted using H₂O₂, in the presence of NaOH, at different times and temperatures. The optimal extraction conditions were 4% H₂O₂ and 2 N NaOH, for 7 h at 50 °C, leading to an extraction yield of 58.2% (w/w). After a purification step, the retained AGPs were characterised using high‐performance liquid chromatography showing a molecular weight of 99.3 kDa. The monosaccharide composition of AGPs were assessed using gas chromatography–mass spectrometry. AGPs were found to be a complex heteropolysaccharide with a repeating unit mainly composed of galactose, arabinose, xylose, mannose, rhamnose, and glucuronic acid with the respective ratios: 45:26:7:10:1:11. The acidic nature of the polysaccharide is due to the presence of glucuronic acid. Total antioxidant activity, free radical‐scavenging activity and reducing power assay of AGPs were investigated. The obtained results showed high antioxidant activities of AGPs. Furthermore, beyond 60 mg mL^?1, AGPs exhibited bacterial growth inhibition for five pathogenic strains: Escherichia coli, Staphylococcus aureus, Enterococcus feacalis, Pseudomonas aeruginosa and Salmonella typhimurium.     

Adaptive moving shadow detection and removal by new semi-supervised learning technique

The efficient application of current methods of shadow detection in video is hindered by the difficulty in defining their parameters or models and/or their application domain dependence. This paper presents a new shadow detection and removal method that aims to overcome these inefficiencies. It proposes a semi-supervised learning rule using a new variant of co-training technique for shadow detection and removal in uncontrolled scenes. The new variant both reduces the run-time through a periodical execution of a co-training process according to a novel temporal framework, and generates a more generic prediction model for an accurate classification. The efficiency of the proposed method is shown experimentally on a testbed of videos that were recorded by a static camera and that included several constraints, e.g., dynamic changes in the natural scene and various visual shadow features. The conducted experimental study produced quantitative and qualitative results that highlighted the robustness of our shadow detection method and its accuracy in removing cast shadows. In addition, the practical usefulness of the proposed method was evaluated by integrating it in a Highway Control and Management System software called RoadGuard.     

On line background modeling for moving object segmentation in dynamic scenes

Fast and accurate moving object segmentation in dynamic scenes is the first step in many computer vision applications. In this paper, we propose a new background modeling method for moving object segmentation based on dynamic matrix and spatio-temporal analyses of scenes. Our method copes with some challenges related to this field. A new algorithm is proposed to detect and remove cast shadow. A comparative study by quantitative evaluations shows that the proposed approach can detect foreground robustly and accurately from videos recorded by a static camera and which include several constraints. A Highway Control and Management System called RoadGuard is proposed to show the robustness of our method. In fact, our system has the ability to control highway by detecting strange events that can happen like vehicles suddenly stopped in roads, parked vehicles in emergency zones or even illegal conduct such as going out from the road. Moreover, RoadGuard is capable of managing highways by saving information about the date and time of overloaded roads.     

Mesoscopic approach for steady‐state free convection in a diamond array

The purpose of the present paper is testing an in‐house efficiency algorithm based on lattice Boltzmann method (LBM) and using it to resolve the obtained coupled nondimensional governing equations to analyze two‐dimensional free convection inside a cold outer cavity subjected to a heated cylindrical diamond array. Steady state or oscillatory results are obtained using the Bhatnagar‐Gross‐Krook collision model associated to the thermal LBM. Both the velocity and temperature fields are solved using the D2Q9 models. With different Rayleigh numbers (Ra), the tested free convection can either achieve to steady state or oscillatory. We extended our in house Fortran 90 code using curved boundary conditions and implemented them into a cavity with a diamond array. The numerical simulations were done using distinct Ra (10⁶ and 10 ⁷) and distances between the four neighboring circular cylinders aligned in a diamond array. The effects of several physical parameters, including Ra and position of the hot body array on flow and heat transfer characteristics are investigated. The obtained results are highlighted in the form of streamlines, isotherms, and velocities plots. We show in this paper the stability and the efficiency of the LBM to deal with a complex geometry and its ability to reach suitable convergence criteria for high Ra (10 ⁶ and 10 ⁷). The numerical results indicate that LBM can simulate numerical problems with a high Ra reaching a steady state where we can depict the change of the flow pattern and enhancement of the heat transfer in the presence of heated diamond array.     

Oxy‐fuel combustion technology: current status,applications, and trends

The increased level of emissions of carbon dioxide into the atmosphere due to burning of fossil fuels represents one of the main barriers toward the reduction of greenhouse gases and the control of global warming. In the last decades, the use of renewable and clean sources of energies such as solar and wind energies has been increased extensively. However, due to the tremendously increasing world energy demand, fossil fuels would continue in use for decades which necessitates the integration of carbon capture technologies (CCTs) in power plants. These technologies include oxycombustion, pre‐combustion, and post‐combustion carbon capture. Oxycombustion technology is one of the most promising carbon capture technologies as it can be applied with slight modifications to existing power plants or to new power plants. In this technology, fuel is burned using an oxidizer mixture of pure oxygen plus recycled exhaust gases (consists mainly of CO₂). The oxycombustion process results in highly CO₂‐concentrated exhaust gases, which facilitates the capture process of CO₂ after H₂O condensation. The captured CO₂ can be used for industrial applications or can be sequestrated. The current work reviews the current status of oxycombustion technology and its applications in existing conventional combustion systems (including gas turbines and boilers) and novel oxygen transport reactors (OTRs). The review starts with an introduction to the available CCTs with emphasis on their different applications and limitations of use, followed by a review on oxycombustion applications in different combustion systems utilizing gaseous, liquid, and coal fuels. The current status and technology readiness level of oxycombustion technology is discussed. The novel application of oxycombustion technology in OTRs is analyzed in some details. The analyses of OTRs include oxygen permeation technique, fabrication of oxygen transport membranes (OTMs), calculation of oxygen permeation flux, and coupling between oxygen separation and oxycombustion of fuel within the same unit called OTR. The oxycombustion process inside OTR is analyzed considering coal and gaseous fuels. The future trends of oxycombustion technology are itemized and discussed in details in the present study including: (i) ITMs for syngas production; (ii) combustion utilizing liquid fuels in OTRs; (iii) oxy‐combustion integrated power plants and (iv) third generation technologies for CO₂ capture. Techno‐economic analysis of oxycombustion integrated systems is also discussed trying to assess the future prospects of this technology. Copyright © 2017 John Wiley & Sons, Ltd.     

Adaptive motion/force control of uncertain nonholonomic mobile manipulator with estimation of unknown external force

This paper describes a stable adaptive motion/force control of uncertain nonholonomic mobile manipulator with the consideration of external force. As it is well known, unexpected external force makes the motion of the system unstable since there are no fixed points in the stationary coordinate. Here, a novel adaptive control scheme is utilized to estimate and compensate the unknown external force exerted to the end-effector even if the parameters of the system are uncertain. The important advantages of this approach are to achieve estimation without the requirement of force-sensing feedback and the knowledge of the system dynamic model. The update laws for the force and the parameters are derived from a Lyapunov function to guarantee the control system stability. Furthermore, a unified operational space dynamic formulation is presented to solve the problem of redundancy. As a result, the desired end-effector and platform trajectories are simultaneously tracked with a perfect coordination between the two subsystems. Therefore, the proposed controller proves that it can not only guarantee the stability, but also the tracking performance of the system in the task space. The effectiveness of the proposed algorithm is evaluated through extensive simulations and they demonstrate the stability, tracking trajectories and feasibility in estimating the external force and the dynamic uncertainties.     

Optimising operating conditions in ultrafiltration fouling of pomegranate juice by response surface methodology

The resistance‐in‐series model was used to analyse flux behaviour, which involved the resistances of membrane itself, the fouling and solute concentration polarisation. Response surface methodology was used to establish the relationships between operating parameters and ultrafiltration (UF) efficiency and thus to determine optimal conditions. Experiments were performed according to Box–Behnken design by changing the levels of three parameters, namely transmembrane pressure, feed flow rate and temperature. The fitted mathematical models allowed us to plot isoresponse curves. It was shown that the resistance due to solute concentration polarisation (R_cp) dominated the flux decline (40–74%). The fouling resistance (R_f) varied from 12 to 46%. To optimise simultaneously the three responses studied (R_f, R_cp and permeate limit flux), we applied the desirability function approach which allowed us to determine the best acceptable compromise. The selected UF conditions of the compromise were as follows: three bars, 0.95 L min^?1 and 30 °C. Optimal values of R_f, R_cp and permeate limit flux were equal to 18%, 72% and 19 L h^?1 m^?2, respectively.     

Synergistic verification and validation of systems and software engineering models

In this paper, we present a unified approach for the verification and validation of software and systems engineering design models expressed in UML 2.0 and SysML 1.0. The approach is based on three well-established techniques, namely formal analysis, programme analysis and software engineering (SwE) techniques. More precisely, our contribution consists of the synergistic combination of model checking, static analysis and SwE metrics that enables the automatic and efficient assessment of design models from static and dynamic perspectives. Additionally, we present the design and implementation of an automated computer-aided assessing framework integrating the proposed approach. Moreover, we discuss the related technical details and the underlying synergism. Finally, we illustrate the proposed approach by assessing a design case study that is composed of state machine and sequence diagrams.     

Experimental Investigation of the Interface Behavior of Balanced and Unbalanced E-Glass/Polyester Woven Fabric Composite Laminates

The aim of this work is to study the influence of weave structure on the crack growth behavior of thick E-glass/polyester woven fabric composites laminates. Two different types of laminates were fabricated: (i) balanced: plain weave (taffetas T)/chopped strand mat weave (M) [T/M]₆ and (ii) unbalanced: 4-hardness satin weave (S)/chopped strand mat weave [S/M]₇. In order to accurately predict damage criticality in such structures, mixed mode fracture toughness data is required. So, the experiments were conducted using standards delamination tests under mixed mode loading and pure mode loading. These tests were carried out in mode II using End Load Split (ELS) tests and in mixed-mode I+II by Mixed Mode Flexure (MMF) tests under static conditions. The test methodology used for the experiments will be presented. The experimental results have been expressed in terms of total strain energy release rate and R-curves. The fracture toughness results show that the T/M interface is more resistant to delamination than the S/M interface.