Characterization and electrochemical properties of CF4 plasma-treated boron-doped diamond surfaces

The effect of CF₄ plasma etching on diamond surfaces, with respect to treatment time, was investigated using scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. SEM observations and Raman spectra indicated an increase in surface roughening on a scale of 10–20 nm, and an increase in crystal defect density was apparent with treatment time in the range of 10 s to 30 min. In contrast, alteration of the diamond surface terminations from oxygen to fluorine was found to be rather rapid, with saturation of the F/C atomic ratio estimated from XPS analysis after treatment durations of 1 min and more. The redox kinetics of Fe(CN)₆^3−/4− was also found to be significantly modified after 10 s of CF₄ plasma treatment. This behavior shows that C–F terminations predominantly affect the redox kinetics compared to the effect on the surface roughness and crystal defects. The double-layer capacitance (C_dl) of the electrolyte/CF₄ plasma-treated boron-doped diamond interface was found to show a minimum value at 1 min of treatment. These results indicate that a short-duration CF₄ plasma treatment is effective for the fabrication of fluorine-terminated diamond surfaces without undesirable surface damage.     

Post-Event Site Investigation,Monitoring, Stability Analysis,and Modeling of a Gas Pipeline Explosion

This paper describes the results of site investigations, monitoring, stability analyses, and soil-pipe interaction modeling of a built-up slope located near Pineto (Abruzzo Province, Central Italy), where a gas pipeline exploded on March 6th, 2015, due to heavy rains inducing slope movements. The slope is formed by OC clay, covered with an upper 10- to 14-m-thick clayey-sandy silt colluvial layer. The explosion in the upper portion of the slope caused extensive damage to existing buildings and threatened human lives. Soon after the event, a site investigation and monitoring program was carried out. A detailed topographic survey and hydrological data were analyzed in order to characterize possible critical rainfall events. The stability of the slope was analyzed both in pre- and in post-explosion conditions. The profiles of the DMT horizontal stress index K _D helped to identify multiple slip surfaces. Then, the results of the site investigation and stability analyses were used to implement a simplified finite element model aimed to describe the soil-pipeline interaction, taking into account the role of the observed wrinkle in the pipeline. The numerical simulations reveal the crucial role played by the slope movements, and by the wrinkle as well, in inducing the collapse of the pipe.     

Nonlinear adaptive control system design and experiment for a 3-DOF model helicopter

This paper deals with model following control of a model helicopter with three degree-of-freedom. Since the decoupling matrix is singular, a nonlinear structure algorithm is used to design the controller. Furthermore, since the model dynamics are described linearly by unknown system parameters, a well-known parameter estimation technique is introduced. The integral type of estimation model is proposed here since the use of the derivative type of model cannot obtain the desired estimation result. The experimental results show the effectiveness of the proposed method. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Cloning and characterization of a β-N-acetylglucosaminidase (BmFDL) from silkworm Bombyx mori

In insects, β-N-acetylglucosaminidase (GlcNAcase) participates in critical physiological processes such as fertilization, metamorphosis, and glycoconjugate degradation. Insects produce glycoproteins carrying paucimannosidic-type N-glycans, the terminal GlcNAc residue of which is cleaved by a GlcNAc-linkage specific GlcNAcase, also known as the fused lobes (FDL) protein. To obtain information on the structure of GlcNAcases and insight into their contribution to physiological processes, we cloned Bombyx mori FDL (BmFDL) from silkworm larvae. The full-length cDNA (1.9 kb) encoded a protein of 633 amino acids with 42% amino acid sequence identity to Drosophila melanogaster FDL (DmFDL). Recombinant BmFDL cleaved only β-1,2-linked GlcNAc residues from the α-1,3 branch of biantennary N-glycan. This substrate specificity was similar to that of DmFDL. Microsomal FDL activity was inhibited by anti-BmFDL antibodies. Taken together, our results suggest that BmFDL is a N-glycan-processing GlcNAcase in B. mori.     

Purification and characterization of a novel glutamyl aminopeptidase from chicken meat

A novel glutamyl aminopeptidase (aminopeptidase A, EC 3.4.11.7) was purified from chicken meat by ammonium sulfate fractionation, ethanol fractionation, heat treatment, and successive column chromatographies of DEAE-Sepharose CL-6B and Sephadex G-200. The purified enzyme migrated as a single band on SDS-PAGE. The molecular weight of this enzyme was found to be 55,000 and 550,000 by SDS-PAGE and Sephadex G-200 column chromatographies, respectively. This enzyme hydrolyzed Glu- and Asp-, but not Leu-, Arg-, and Ala-2-naphthylamide (-2NA) at all. The optimum pH and temperature for hydrolysis of Glu-2NA was 7.5. and 70°C, respectively. Reducing agents such as cysteine and dithiothreitol inhibited the activity of this enzyme at concentrations of 1 mM. However, the activation by Ca(2+) and the inhibition by amastatin were not observed.     

Acceleration of calcium phosphate formation on bioactive PMMA-based bone cement by controlling spatial design

Polymethylmethacrylate (PMMA)-based bone cement is widely used for the fixation of artificial joints. However, it is not considered a bioactive material because it lacks the ability to induce a direct bond with bone. In order to improve the long-term stability of cemented fixations, the development of bioactive bone cements is desirable. An essential requirement of a bioactive material includes the induction of bone-like apatite on its surface within the in vivo environment. Previously, we prepared bioactive PMMA-based bone cements by a modification with water-soluble calcium salts and alkoxysilane. Because spatial design may enhance apatite formation on bioactive material surfaces in vivo, we aimed to evaluate the effect of spatial design on apatite formation on modified PMMA-based bone cements in simulated body fluid (SBF). We found that an appropriate spatial design shortened the induction period for the apatite deposition on the modified bone cements. It is expected that osteoconduction would be enhanced in spontaneously created gap between the cement and the host bone leading to tight integration.     

Numerical assessment of the seismic response of an earth embankment on liquefiable soils

This study presents a numerical assessment of the seismic behaviour of an earth embankment founded on liquefiable foundation soils during earthquake loading. Analysis was carried out using an effective stress-based, fully coupled, finite element method. The behaviour of the sandy soil is described by means of a cyclic elastoplastic constitutive model which was developed within the framework of the Armstrong–Frederick type non-linear kinematic hardening concept. The numerical method and the analysis procedure are briefly outlined and as an example, the seismic response of an earth embankment on a saturated sand foundation is assessed. Based on the numerical results, the distinctive patterns of seismic response of the embankment are discussed. Special emphasis is given to the computed results of excess pore water pressures, co-seismic and post-seismic deformations, and accelerations during the seismic excitation. It has been found that the numerical model can capture fundamental liquefaction aspects of the embankment foundation system and produce preliminary results for its seismic assessment.      

Improvement of characteristics of new-type solar cells, having a “transparent conductor/thin Si02 layer with ultrafine metal particles as conductive channels/n-Si” junction

New-type solar cells, having a structure “transparent conductor/thin Si0₂ layer with ultrafine metal islands as conductive channels/n-Si” have been prepared by forming a very thin (< 1.0 nm) silicon oxide (Si0₂) layer as well as platinum (Pt) islands (5–50 nm in size) embedded in it on a single crystal n-type silicon (n-Si) wafer, followed by the deposition of an indium tin oxide (ITO) film (200 nm thick) by the electron-beam evaporation method. The open-circuit photovoltages (V_oc) of the solar cells of the above structure were relatively low, 0.25–0.47 V, but they increased very much to 0.50–0.59 V if a thin (3–10 nm) layer of an organic compound such as copper phthalocyanine (CuPc) was pre-deposited on the Pt-island modified n-Si wafer before the ITO deposition. The reason for the beneficial effect of the pre-deposition of the thin CuPc layer was investigated in detail, and it has been found that certain crystal defects are formed in n-Si near the n-Si/Si0₂ interface during the ITO deposition in the absence of the CuPc layer. The formation of such defects is prevented in the presence of the CuPc layer, which leads to a decrease in surface carrier recombination and hence to the increase in V_oc.