Photocatalytic Property and Electronic Structure of Lanthanide-based Oxysulfides

Lanthanide-based oxysulfides and sulfide, LnTaO_3.5S_0.5, Ln₁₀OS₁₄ (Ln = La, Pr, Nd, Sm) and La₄In₅S₁₃, were successively synthesized by sulfurization in a flowing H₂S. The sulfurization decreased the band-gap energies from >4 eV to <3eV, because of the formation of occupied S3p orbitals on the top of valence band. In accordance with the small band gap, the H₂ evolution from a 0.01 M Na₂S and 0.01 M Na₂SO₃ solution system was observed under irradiation of light up to >500 nm. The rate of H₂ evolution under light irradiation of >500 nm increased in the order of Ni/LaTaO_3.5S_0.5 < Ru/La₁₀OS₁₄ < Pt/La₄In₅S₁₃.     

Stabilization of bioethanol recovery with silicone rubber‐coated ethanol‐permselective silicalite membranes by controlling the pH of acidic feed solution

In order to produce highly concentrated bioethanol by pervaporation using an ethanol‐permselective silicalite membrane, techniques to suppress adsorption of succinic acid, which is a chief by‐product of ethanol fermentation and causes the deterioration in pervaporation performance, onto the silicalite crystals was investigated. The amount adsorbed increased as the pH of the aqueous succinic acid solution decreased. The pervaporation performance also decreased with decreasing pH when the ternary mixtures of ethanol/water/succinic acid were separated. Using silicalite membranes individually coated with two types of silicone rubber, pervaporation performance was significantly improved in the pH range of 5 to 7, when compared with that of non‐coated silicalite membranes in ternary mixtures of ethanol/water/succinic acid. Moreover, when using a silicalite membrane double‐coated with the two types of silicone rubber, pervaporation performance was stabilized at lower pH values. In the separation of bioethanol by pervaporation using the double‐coated silicalite membrane, removal of accumulated substances having an ultraviolet absorption maximum at approximately 260 nm from the fermentation broth proved to be vital for efficient pervaporation. Copyright © 2005 Society of Chemical Industry     

Design of nonlinear controllers for active vehicle suspension with state constraints

Design of active vehicle suspension has tradeoffs between three main performance metrics (passenger comfort, suspension deflection and road holding ability). It has been known that each performance can be achieved by H _∞ controller and they can be gathered by LPV (Linear Parameter Varying) method. However, because the suspension deflection limit was not explicitly considered, this limit may be exceeded. In this paper, the authors propose a “reference shaping“ based method in order to improve the control performance. In this approach, a “virtual reference” signal is imposed to the system such that the suspension deflection is kept small. The effectiveness of the approach is examined by numerical simulations. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Pectoralis major tendon avulsion in association with a proximal humerus fracture

We report a very rare case of an avulsion of the pectoralis major tendon in association with a two-part proximal humerus fracture. Pectoralis major tendon avulsion was confirmed intraoperatively during open reduction and internal fixation of the humerus fracture. In retrospect, the preoperative radiographic finding of posterolateral and proximal displacement of the humeral shaft suggested an injury to the pectoralis major. Because others have reported that the best treatment of a pectoralis major tendon avulsion is surgical repair, we feel that it is important to suspect such an injury in a proximal humerus fracture when this anatomic displacement is present.     

A monolithic DC temperature compensation bias scheme for multistageHEMT integrated circuits

This work benchmarks the first demonstration of a multistage monolithic HEMT IC design which incorporates a DC temperature compensated current-mirror bias scheme. This is believed to be the first demonstrated monolithic HEMT bias scheme of its kind. The active bias approach has been applied to a 2-18 GHz five-section low noise HEMT distributed amplifier which achieves a nominal gain of 12.5 dB and a noise figure <2.5 dB across a 2-18 GHz band, The regulated current-mirror scheme achieves better than 0.2% current regulation over a 0-125°C temperature range, The RF gain response was also measured over the same temperature range and showed less than 0.75 dB gain degradation. This results in a -0.006 dB/°C temperature coefficient which is strictly due to HEMT device G_m variation with temperature. The regulated current-mirror circuit can be employed as a stand-alone V_gs-voltage reference circuit which fan be monolithically applied to the gate bias terminal of existing HEMT ICs for providing temperature compensated performance, This monolithic bias approach provides a practical solution to DC bias regulation and temperature compensation for HEMT MMICs which can improve the performance, reliability, and cost of integrated microwave assemblies (IMAs) used in space-flight military applications     

Superconducting Coupling Nature at Grain Boundaries in Bi2Sr2CaCu2Ox Glass-Ceramics

Superconducting coupling nature at grain boundaries in Bi₂Sr₂CaCu₂O _x glass-ceramics consisting mainly of the low- T _c phase was first examined by measuring superconducting properties and temperature or ac field dependence of ac complex susceptibility. It was found from the ac loss peaks that superconducting coupling at grain boundaries was basically characterized by three types of weak links. The weak-link behaviors at grain boundaries depended strongly on cooling conditions after annealing and annealing time and temperature. Particularly, it was found that the weak links at grain boundaries were improved by prolonged annealing at 840°C. The furnace-cooled glass-ceramics obtained by annealing at 820° or 840°C for about 200 h exhibited a critical transport current density (77 K, zero magnetic field) of about 200 A/cm².     

Energy transmission transformer for a wireless capsule endoscope: analysis of specific absorption rate and current density in biological tissue

This paper reports on the electromagnetic influences on the analysis of biological tissue surrounding a prototype energy transmission system for a wireless capsule endoscope. Specific absorption rate (SAR) and current density were analyzed by electromagnetic simulator in a model consisting of primary coil and a human trunk including the skin, fat, muscle, small intestine, backbone, and blood. First, electric and magnetic strength in the same conditions as the analytical model were measured and compared to the analytical values to confirm the validity of the analysis. Then, SAR and current density as a function of frequency and output power were analyzed. The validity of the analysis was confirmed by comparing the analytical values with the measured ones. The SAR was below the basic restrictions of the International Commission on Nonionizing Radiation Protection (ICNIRP). At the same time, the results for current density show that the influence on biological tissue was lowest in the 300-400 kHz range, indicating that it was possible to transmit energy safely up to 160 mW. In addition, we confirmed that the current density has decreased by reducing the primary coil's current.     

Effect of Oxygen Adsorbates on Terahertz Emission Properties of Various Semiconductor Surfaces Covered with Graphene

We have studied coherent terahertz (THz) emission from graphene-coated surfaces of three different semiconductors—InP, GaAs, and InAs—to provide insight into the influence of O₂ adsorption on charge states and dynamics at the graphene/semiconductor interface. The amplitude of emitted THz radiation from graphene-coated InP was found to change significantly upon desorption of O₂ molecules by thermal annealing, while THz emission from bare InP was nearly uninfluenced by O₂ desorption. In contrast, the amount of change in the amplitude of emitted THz radiation due to O₂ desorption was essentially the same for graphene-coated GaAs and bare GaAs. However, in InAs, neither graphene coating nor O₂ adsorption/desorption affected the properties of its THz emission. These results can be explained in terms of the effects of adsorbed O₂ molecules on the different THz generation mechanisms in these semiconductors. Furthermore, these observations suggest that THz emission from graphene-coated semiconductors can be used for probing surface chemical reactions (e.g., oxidation) as well as for developing O₂ gas sensor devices.